Iradio Iradio UV-88, DM-UV4R; BAJETON BJ-8300, BT-7800; BinTolk BT8000, BT8200, BT7700; Quansheng TK11, UV-K5, UV-K6; Radtel RT-860, RT-4D, RT-920; BAOFENG UV-32, UV-21 PRO, BF-888S, UV-5R, DM-32, U

Contents

USB Programming Cable Instruction Manual

For Iradio, BinTolk, Radtel, Quansheng, and Baofeng Walkie Talkie Radios

1. Product Overview

This USB programming cable is designed to facilitate communication between your compatible walkie-talkie radio and a personal computer. It allows you to program various settings, including frequency channels, privacy codes, and other operational parameters, directly from your computer using appropriate software.

USB Programming Cable with PL2303 Chip and compatible radio models listed

Figure 1: USB Programming Cable with PL2303 Chip and compatible radio models.

The cable features a PL2303 chip and is designed for drive-free operation on supported Windows systems. It connects to your walkie-talkie via a K-plug connector and to your computer via a standard USB port.

2. Setup Instructions

  1. Driver Installation: While the cable is designed for drive-free operation on many Windows systems, if your computer does not automatically recognize the cable, you may need to install a driver. A driver CD might be included with your purchase. If not, please contact the seller for driver assistance.
  2. Connect to Computer: Insert the USB end of the programming cable into an available USB port on your computer.
  3. Connect to Walkie Talkie: Insert the K-plug connector into the programming port of your walkie-talkie radio. Ensure a secure connection.
  4. Identify COM Port: After connecting, open your computer's Device Manager (usually found in Control Panel or by searching "Device Manager"). Look under "Ports (COM & LPT)" to identify the assigned COM port number for the USB Serial Port. This COM port number will be needed for your programming software.
  5. Obtain Programming Software: You will need specific programming software compatible with your walkie-talkie model. If you do not have this software, please contact the seller or your radio manufacturer for assistance.
Walkie talkie connected to a laptop showing programming software interface

Figure 2: Example of a walkie-talkie connected to a computer for programming.

3. Operating Instructions

Once the cable is connected and recognized by your computer, and you have the correct programming software installed, follow these general steps to program your walkie-talkie:

  1. Launch Software: Open the programming software for your specific walkie-talkie model.
  2. Select COM Port: In the software settings, select the COM port number identified in the setup process (Step 4).
  3. Read from Radio: Use the software's "Read from Radio" function to download the current settings from your walkie-talkie. This is recommended before making any changes.
  4. Modify Settings: Adjust the desired parameters such as frequencies, channel names, squelch levels, and other features within the software interface.
  5. Write to Radio: After making your modifications, use the "Write to Radio" function in the software to upload the new settings to your walkie-talkie.
  6. Verify: Disconnect the cable and test your walkie-talkie to ensure the new settings have been applied correctly.

Always refer to your specific radio's programming software manual for detailed instructions, as interfaces and procedures may vary.

4. Maintenance

To ensure the longevity and optimal performance of your programming cable, please observe the following maintenance guidelines:

  • Storage: Store the cable in a clean, dry environment away from extreme temperatures and direct sunlight.
  • Handling: Avoid sharp bends, kinks, or excessive pulling on the cable, especially near the connectors. The cable is designed to be durable and resistant to bending, but proper handling will extend its lifespan.
  • Cleaning: If necessary, gently wipe the cable and connectors with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Inspection: Periodically inspect the cable and connectors for any signs of damage, such as frayed wires or bent pins.
Close-up of the high-quality, durable programming cable

Figure 3: The cable is designed for durability and resistance to bending.

5. Troubleshooting

  • Cable Not Recognized:
    • Ensure the cable is securely connected to both the computer and the walkie-talkie.
    • Check your computer's Device Manager to see if the USB Serial Port is listed and if there are any error indicators.
    • If not recognized, install the appropriate driver for the PL2303 chip. A driver CD may be included.
    • Try a different USB port on your computer.
  • Programming Software Issues:
    • Verify that you are using the correct programming software for your specific walkie-talkie model. Generic software may not work.
    • Ensure the correct COM port is selected within the programming software.
    • If you lack the software, contact the seller for assistance.
  • "No Program to Upload" Error: This typically indicates that the programming software is not compatible with your radio model or that the software itself is missing the necessary firmware/data for your specific device. Double-check software compatibility and ensure all necessary files are present.

6. Specifications

Feature Detail
Item Type Programming Cable
Brand Name Iradio
Chip Name PL2303
Connector A (to Walkie Talkie) K Plug
Connector B (to PC) USB
Adapted System WinXP, Win7, Win8, Win10, Win11
Cable Length Up to 100 CM (39.37 Inches)
Battery Included No
Origin Mainland China
Compatible Walkie Talkie Models BAJETON BJ-8300, BJ-7800; Iradio UV-88, DM-UV4R; BinTolk BT8000, BT8200, BT7700; Chierda TC318; Quansheng TK11, UV-K5, UV-K6; Radtel RT-860, RT-4D, RT-920; BAOFENG UV-32, UV-21 PRO, BF-888S, UV-5R, DM-32, UV-5RH, UV-17 PRO, etc.
Image showing the cable's length of 100cm

Figure 4: Cable length for flexible connectivity.

7. User Tips

  • Software is Key: The programming cable is a hardware interface. The success of programming heavily relies on having the correct and functional software for your specific radio model.
  • Driver Check: If the cable isn't working, always start by checking if the driver is correctly installed and if the COM port is visible in Device Manager.
  • Backup Settings: Before making any changes, always read and save the existing settings from your radio to a file on your computer. This allows you to restore your radio to its previous state if needed.
  • Included CD: Some packages may include a mini-CD with drivers or basic software. Check your package contents.

8. Warranty and Support

This product does not come with an explicit manufacturer's warranty statement in the provided information. For any issues related to product defects or functionality, please contact the seller directly through the platform where you made your purchase.

For assistance with programming software or drivers not included with the cable, please reach out to the seller for guidance or resources.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.