1. Introduction
Thank you for choosing the JUANJUAN WIFI Indoor CO2 Detector Air Quality Monitor. This device is designed to provide real-time monitoring of various indoor air quality parameters, including Carbon Dioxide (CO2), Formaldehyde (HCHO), Total Volatile Organic Compounds (TVOC), temperature, and humidity. With its clear digital display, intelligent alarm system, and Wi-Fi connectivity for app control, it helps you maintain a healthy indoor environment.
2. Key Features
- 5-in-1 Monitoring: Simultaneously measures CO2 concentration, HCHO value, TVOC value, temperature, and relative humidity.
- Clear Digital Display: Large screen with backlight for easy reading, supporting multiple display modes and an alarm function.
- High Accuracy: Utilizes air semiconductor and infrared sensors, combined with a high-performance chip for precise detection. Features an NDIR gas sensor for higher accuracy, longer service life, and reduced fluctuation.
- Wi-Fi App Control: Connects to a mobile application via Wi-Fi for synchronous data reading and control, compatible with iOS and Android systems.
- Built-in Rechargeable Battery: Equipped with a 1200mAh lithium battery for low power consumption and long endurance.
- Wide Application: Suitable for various environments including homes, offices, schools, warehouses, and agricultural settings.
- Automatic Monitoring: No calibration required at startup; the device performs automatic monitoring.
- Scientific Design: Four-side openings enhance air circulation, improving heat dissipation and detection accuracy.
- Intelligent Alarm System: Provides alerts for excessive CO2 levels.
3. Setup Guide
3.1. Package Contents
Before using your device, please ensure all items are present:
- 1 x Air Quality Monitor
- 1 x USB Cable (Type-C)
- 1 x User Manual
3.2. Initial Power On & Charging
Connect the device to a power source using the provided Type-C USB cable. The device has a built-in 3.7V, 1200mAh Lithium Battery. For the first use, it is recommended to fully charge the device.
3.3. Wall Mounting (Optional)
The device features a wall-mounted design for convenient placement. Use appropriate hardware (not included) to secure it to a wall.
3.4. App Pairing
The device is a smart device and can be connected to a mobile application for enhanced functionality.
- When you first power on the device, it will automatically enter pairing mode. The Wi-Fi icon in the upper left corner of the display will flash.
- Download and open the companion mobile application (e.g., "Smart Life" or similar, as shown in the video). Register an account and log in.
- The app should automatically detect the device and a dialog box will pop up. Click "Add" to initiate the pairing process.
- Follow the on-screen instructions in the app to complete the pairing. You may need to enter your Wi-Fi network password.
- Once successfully paired, the device will be listed in your app, and you can view various data directly.
4. Operating Instructions
4.1. Real-time Monitoring
The device provides real-time display of CO2, HCHO, TVOC, temperature, and humidity. The CO2 level is indicated by a color-coded bar at the bottom of the screen:
- Green Light: 0-799 PPM (Good air quality)
- Yellow Light: 800-1199 PPM (Moderate air quality)
- Orange Light: 1200-1599 PPM (Poor air quality)
- Red Light: More than 1600 PPM (Unhealthy air quality)
4.2. Understanding Readings
- CO2 (Carbon Dioxide): Measures the concentration of carbon dioxide in parts per million (PPM). High levels can indicate poor ventilation.
- HCHO (Formaldehyde): Measures formaldehyde concentration in mg/m³. Even low levels can cause discomfort.
- TVOC (Total Volatile Organic Compounds): Detects various organic compounds like benzene, alkanes, aromatics, etc., in mg/m³. High TVOC levels can impact the central nervous system.
- TEMP (Temperature): Displays the ambient temperature in Celsius or Fahrenheit.
- HUMI (Humidity): Displays the relative humidity percentage.
4.3. CO2 Level Hazards
4.4. Alarm Function
The device features an intelligent alarm system. An alert sound will be issued if the CO2 concentration exceeds 1500 PPM. You can adjust the CO2 alarm value and toggle the alarm switch within the mobile application.
4.5. App Functionality
After pairing, the mobile app allows you to:
- View real-time data for all parameters.
- Access historical data logs (Day, Month, Year) for CO2, HCHO, TVOC, and Temperature.
- Switch temperature units between Celsius (°C) and Fahrenheit (°F).
- Set custom CO2 alarm values.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Sensor Care: The device uses an NDIR gas sensor, which is designed for high accuracy and a longer service life. Avoid obstructing the air circulation openings on the sides of the device to ensure optimal performance.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
6. Troubleshooting
- Device not turning on:
- Ensure the device is fully charged or connected to a power source using the Type-C USB cable.
- Wi-Fi icon is flashing but not connecting to app:
- Ensure your mobile phone's Wi-Fi is enabled and connected to a 2.4GHz network. Make sure the device is within range of your Wi-Fi router. Try restarting both the device and the app, then attempt pairing again.
- Inaccurate readings:
- Ensure the device is placed in an area with good air circulation and away from direct drafts, heat sources, or strong chemical fumes. The scientific layout with four-side openings is designed for optimal air intake. Avoid placing it near sources of high CO2 (e.g., directly next to a person breathing heavily) for general room monitoring. The device performs automatic monitoring and does not require manual calibration at startup.
- App shows "Offline" or "No data":
- Check the device's Wi-Fi connection status. If the Wi-Fi icon is not solid, the device may have lost connection. Re-pair the device if necessary, or check your Wi-Fi network.
7. Specifications
| Parameter | Value |
|---|---|
| Color Options | Black / White (available in 3-in-1 or 5-in-1 variants) |
| CO2 Detection Range | 400-5000 PPM, ±50±10%PPM |
| CO2 Detection Accuracy | 1 PPM |
| TVOC Detection Range (5-in-1 model) | 0-2.0 mg/m³ |
| HCHO Detection Range (5-in-1 model) | 0-0.6 mg/m³ |
| Temperature Detection Range | 0-50℃, ±1℃ |
| Humidity Detection Range | 0-99%RH, ±3%RH |
| Charging Port | Type-C, 500mA |
| Battery | Built-in 3.7V, 1200mAh Lithium Battery |
| Item Size | 90 x 70 x 35 mm (3.54 x 2.76 x 1.38 in) |
| Item Weight | Approximately 0.15 kg |
8. User Tips
- Optimal Placement: For the most accurate readings, place the detector in a central location within the room, away from windows, doors, and direct ventilation. The scientific layout with four-side openings is designed to maximize air circulation for better accuracy.
- Data Logging: The mobile application allows you to record and view historical data for CO2, HCHO, TVOC, and temperature over periods of a day, month, or year. This feature is useful for tracking air quality trends over time.
- No Manual Calibration Needed: The device features automatic monitoring and does not require manual calibration at startup, making it convenient to use right out of the box.
- Temperature Unit Conversion: Easily switch between Celsius and Fahrenheit for temperature display directly within the app settings.
9. Warranty and Support
9.1. Warranty Information
All products from our store come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
9.2. Customer Support
For any questions, technical assistance, or support inquiries, please contact our customer service. All emails will be answered within 24 hours.
