Intelamp YL005-10EP

Contents

Intelamp Solar LED Motion Sensor Wall Light Instruction Manual

Model: YL005-10EP

Brand: Intelamp

1. Introduction

Thank you for choosing the Intelamp Solar LED Motion Sensor Wall Light. This product is designed to provide efficient, bright, and intelligent outdoor lighting using solar energy. With its long-range motion sensor, durable construction, and multiple lighting modes, it is an ideal solution for illuminating your garden, garage, pathways, and other outdoor areas. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your light.

Intelamp Solar LED Light with remote control and solar panel
Intelamp Solar LED Light with remote control and solar panel

2. Safety Information

  • Ensure the solar panel is installed in a location that receives maximum direct sunlight for optimal charging.
  • Do not disassemble, modify, or attempt to repair the product yourself. This may void the warranty and cause damage.
  • Keep the product away from fire or high temperatures to prevent battery damage or explosion.
  • Avoid direct eye exposure to the LED light, as it can be very bright.
  • Dispose of the product and its battery according to local regulations at the end of its lifespan.
  • Ensure all mounting hardware is securely fastened to prevent the light from falling.

3. Package Contents

Please check the package to ensure all components are present and in good condition:

  • Solar LED Motion Sensor Wall Light Unit
  • Solar Panel with connecting cable
  • Remote Control
  • Mounting Accessories (screws, wall plugs, tie-wraps)
  • Instruction Manual (this document)

4. Specifications

FeatureSpecification
Brand NameIntelamp
Power SourceSolar
Solar Panel5V/2400mA (12W), 22.5% high conversion rate
Battery12000mAh Lithium Battery (Electric vehicle-grade)
Brightness3000 Lumens
Working TimeFully charged in 5 hours of direct sunlight, provides 4 hours high light or 36 hours low light.
Motion Sensor RangeDetects motion within 8 meters, activates light up to 30 meters away. Optional sensor box extends range up to 25 meters.
Protection LevelIP65 Waterproof
Body MaterialABS
Light SourceIntegrated LED
DimmableYes
Warranty2 Years
Product variants and key specifications table
Product variants (YL005-10E, YL005-10EP White, YL005-10EP Black) and key specifications table
Dimensions of solar panel, light unit, and remote control
Dimensions of the solar panel (9.1in x 13.4in), light unit (7.6in x 9.3in), and cable length (16.4ft). Also shows the remote control and sensor box dimensions (2.5in x 4.5in).

5. Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Initial Charge: Before first use, ensure the solar panel is connected to the light unit and placed in direct sunlight for at least 5 hours to fully charge the battery.
  3. Test Functionality: After initial charging, test the light and remote control functions in a dark environment to ensure proper operation.
Solar panel charging and battery life
The 12000mAh battery fully charges in 5 hours of direct sunlight, providing up to 40 hours of lighting.

6. Installation

The Intelamp Solar LED Light offers flexible installation options. Choose a location that receives ample direct sunlight for the solar panel and provides the desired illumination for the light unit.

6.1 Choosing an Installation Location

  • Solar Panel: Mount the solar panel in an area that receives at least 5-6 hours of direct sunlight daily. Avoid shaded areas from trees, buildings, or other obstructions.
  • Light Unit: Install the light unit where illumination is needed. Consider the motion sensor's range (up to 8 meters detection, 30 meters light activation) and the cable length (16.4ft) connecting it to the solar panel.

6.2 Mounting Methods

The light unit and solar panel can be installed using the provided mounting accessories:

  1. Wall Mounting: Use screws and wall plugs to securely attach the light unit and solar panel to a wall.
  2. Post/Tree Mounting: Utilize the provided tie-wraps to fasten the light unit and solar panel to a post or tree.

Adjustable Light Head: The light head can be adjusted up to 120° to direct illumination precisely where needed.

Installation methods for the solar light and adjustable light head
Installation methods (wall, post) and adjustable light head.
Various mounting options for the light unit
The light unit can be mounted on walls, trees, under eaves, or on posts, with 120° adjustment.

7. Operating Instructions

The Intelamp Solar LED Light operates automatically, turning off during the day for charging and activating at night. It features an intelligent motion sensor and can be controlled via the included remote.

7.1 Automatic Operation

  • The light will automatically charge during daylight hours when the solar panel is exposed to sunlight.
  • At night, the light will automatically switch on according to the selected lighting mode.

7.2 Remote Control Functions

Use the remote control to select different lighting modes and adjust settings:

  • ON/OFF: Turn the light on or off manually.
  • Brightness Adjustment: Adjust the light intensity (e.g., 60%, 80%, 100%).
  • Timer Function: Set the light to stay on for a specific duration (e.g., 2H, 4H, 6H).
  • Motion Sensor Delay: Select the duration for high-brightness lighting after motion detection (30s, 3min, 10min).
  • Sensor Mode: Activate motion sensor modes.
  • Dim Mode: Activate dim light mode.
Remote control and lighting modes diagram
Remote control functions and various lighting modes.
Product demonstration video showcasing features and operation.

8. Lighting Modes

The light offers four distinct lighting modes, configurable via the remote control. The light does not operate during the daytime.

  1. Dim Light Sensor Mode (Mode 1): The light turns on strong when motion is detected, then dims after people leave (after 30s/3min/10min, depending on remote setting).
  2. Strong Light Sensor Mode (Mode 2): The light turns on strong when motion is detected and turns off completely after people leave.
  3. Strong Long Light Mode (Mode 3/4): The light stays on at a strong brightness for a lasting period (2-12 hours) in darkness or at night, then automatically switches to dim or off after this period.
Intelligent Motion Sensor demonstrating 8m detection and 30m light activation
Intelligent Motion Sensor: The first light activates within 8 meters, transmitting a signal to adjacent lights within 30 meters to also come on.
Sensor box for extended sensing range
Optional Sensor Box: If installed at a gate, the sensor box detects motion within 8 meters and illuminates the light in the yard 25 meters away.
Linked light functionality for illuminating paths
Multiple Intelamp lights can be linked to illuminate an entire path or area.

9. Maintenance

  • Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
  • Check Connections: Periodically inspect the cable connections between the solar panel and the light unit to ensure they are secure and free from damage.
  • Clear Obstructions: Ensure no new obstructions (e.g., growing branches) are shading the solar panel.
  • Battery Care: The electric vehicle-grade lithium battery is designed for long life. Avoid prolonged storage in a completely discharged state.
  • IP65 Waterproof: The light is IP65 rated for water resistance, but avoid submerging it in water or exposing it to high-pressure water jets.
IP65 Waterproof Lights operating in rainy conditions
The IP65 waterproof design ensures reliable operation even in windy and rainy conditions.

10. Troubleshooting

  • Light does not turn on at night:
    • Ensure the solar panel is receiving sufficient direct sunlight during the day.
    • Check if the light is in the 'OFF' mode via the remote control.
    • Verify that the solar panel cable is securely connected to the light unit.
    • The battery might be low; allow several days of full sunlight charging.
  • Motion sensor not working:
    • Ensure the motion sensor is not obstructed.
    • Check if the light is set to a motion sensor mode using the remote.
    • Test the sensor range; it detects motion within 8 meters.
  • Light is dim or only stays on for a short time:
    • The solar panel may not be getting enough sunlight for a full charge. Relocate if necessary.
    • Clean the solar panel surface.
    • Ensure the battery is fully charged (5 hours direct sunlight for 40 hours low light).

11. User Tips

  • Solar Panel Placement: To maximize charging efficiency, always ensure your solar panel is positioned to receive direct, unobstructed sunlight for the longest possible duration each day. Even partial shading can significantly reduce charging.
  • Verify Solar Cell Coverage: When receiving your product, visually inspect the solar panel to confirm that the photovoltaic cells cover the entire panel surface as depicted in product images. This ensures optimal energy capture.
  • Extended Sensing: If you need to detect motion from a greater distance, consider utilizing the optional sensor box, which can extend the sensing range up to 25 meters when installed appropriately.

12. Warranty and Support

Your Intelamp Solar LED Motion Sensor Wall Light comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact Intelamp customer service through your original point of purchase. Please have your purchase receipt and product model number ready when contacting support.

© 2023 Intelamp. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.