intelamp YL005-16A

Contents

Intelamp Solar Street Light YL005-16A Instruction Manual

Model: YL005-16A | Brand: intelamp

1. Introduction

Thank you for choosing the Intelamp Solar Street Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar light. Designed for outdoor use, this high-brightness LED light features advanced motion sensing, intelligent linkage, and a durable, waterproof construction to illuminate your surroundings effectively.

2. Safety Information

  • Read all instructions carefully before installation and use.
  • Ensure the solar panel is exposed to direct sunlight for optimal charging.
  • Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
  • Keep the product away from open flames or extreme heat sources.
  • Handle the product with care to avoid damage to the solar panel or LED components.
  • When installing, ensure the mounting surface is stable and can support the weight of the light.

3. Package Contents

Please check the package to ensure all items are present:

  • Intelamp Solar Street Light (Model YL005-16A)
  • Mounting Bracket
  • Remote Control
  • Installation Screws and Anchors
  • User Manual (this document)

4. Specifications

FeatureSpecification
ModelYL005-16A
Brand Nameintelamp
Power SourceSolar
Voltage5V
Light SourceLED bulbs (142 pcs)
Brightness3000LM
Is DimmableYes
Solar Cell TypeLithium Battery
Battery Capacity3.2V/12500mAh
Protection LevelIP65 (Waterproof)
Body MaterialABS
Installation MethodSelf-contained
Batteries IncludedYes
Charge Time6 hours (fully charged)
Light TimeAbout 36 hours
Motion Sensor Detection Angle180°
Motion Sensor Operation Range25ft * 2
Lighting Angle240° (dual wide-angle illumination)
Intelligent Linkage RangeUp to 66ft (20m)
Dimensions (approx.)Length: 13.4in, Solar Panel Width: 7.3in, Height: 10.6in, Base Width: 6.5in
Warranty2 Years

Product dimensions and key specifications tableFigure 1: Product Dimensions and Specifications

5. Installation

5.1 Choosing a Location

Select a location that receives direct sunlight for at least 5-6 hours daily to ensure optimal charging of the solar panel. Avoid areas under eaves, trees, or other obstructions that may block sunlight.

5.2 Wall Installation

  1. Mark the desired mounting position on the wall.
  2. Drill holes at the marked positions using an appropriate drill bit for the provided screws and anchors.
  3. Insert the anchors into the drilled holes.
  4. Align the mounting bracket with the holes and secure it to the wall using the screws.
  5. Attach the solar street light to the mounting bracket.

5.3 Pole Installation

The self-contained design also allows for pole installation, suitable for various outdoor scenarios. Use appropriate pole mounting hardware (not always included) to secure the light firmly to a pole.

5.4 Adjusting the Solar Panel Angle

The solar panel angle is adjustable in three levels to maximize sun exposure and charging efficiency. Loosen the adjustment screws, set the panel to the desired angle, and tighten the screws securely.

Diagram showing the adjustable angle of the solar panel for optimal sun exposureFigure 2: Adjustable Solar Panel Angle

Intelamp Solar Street Light with adjustable solar panel and 240° illuminationFigure 3: Product Overview with Adjustable Panel

6. Operation

6.1 Initial Charging

Before first use, ensure the solar light is placed in direct sunlight for at least 6 hours to fully charge the internal battery.

Solar street light showing 6 hours charging for 36 hours lightingFigure 4: Charging and Lighting Duration

6.2 Lighting Modes

The Intelamp Solar Street Light offers 4 distinct lighting modes, controllable via the included remote control. The light will not activate during daytime.

  • Mode 1: Dim Light Sensor Mode
    Turns on strong light when motion is detected. Switches to dim light after 30s/40s/60s (adjustable) when people leave.
  • Mode 2: Strong Light Sensor Mode
    Turns on strong light when motion is detected. Turns off after people leave.
  • Mode 3/4: Strong Long Light Mode
    Turns on lasting 2-12 hours in darkness or night. Auto switches to dim/off after 2-12 hours.

Diagram explaining the 4 lighting modes with remote control optionsFigure 5: Remote Control and Lighting Modes

6.3 Motion Sensing

Equipped with dual motion sensors, the light provides a wider and longer detection range. The sensing angle covers 180° with an operation range of 25ft * 2.

Diagram illustrating the 180° sensing angle of the dual sensorsFigure 6: Dual Sensor Detection Angle

Comparison of detection range between dual sensors (180°, 25ft*2) and single sensor (90°, 25ft)Figure 7: Wider and Longer Detection

6.4 Intelligent Linkage

When one Intelamp solar light is activated by motion, it emits a signal that triggers other Intelamp solar lights within a 66ft (20m) radius to illuminate simultaneously. This creates a continuous path of light as you move.

Diagram showing intelligent mutual control where nearby lights activate within 30 metersFigure 8: Intelligent Mutual Control Sensor

6.5 Using the Remote Control

The remote control allows you to select lighting modes, adjust dimming times, and control brightness levels (e.g., 60%, 80%, 100% in motion sensor modes).

Image of the solar street light with its remote controlFigure 9: Product with Remote Control

Diagram showing motion sensor adjusting brightness from 60% to 100% via remote controlFigure 10: Motion Sensor Brightness Adjustment

6.6 Product Demonstration Video

Video 1: Product demonstration showing intelligent sensing, intelligent linkage, adjustable design, and installation methods.

7. Maintenance

7.1 Cleaning

  • Regularly clean the solar panel surface to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
  • Use a soft, damp cloth to wipe the light fixture. Do not use abrasive cleaners or solvents.

7.2 Battery Care

  • The integrated solar panel design provides shade to the lamp, which helps reduce the internal temperature during hot summers, contributing to the extended lifespan of the lithium battery.
  • Ensure the light is regularly charged by sunlight to maintain battery health. Prolonged periods without charge can reduce battery performance.

Solar street light installed outdoors, demonstrating IP65 waterproof rating in rainFigure 11: IP65 Waterproof Protection

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on at night.Insufficient charging; switch is off; faulty sensor.Ensure solar panel receives direct sunlight for 6+ hours. Check if the power switch is ON. Test different lighting modes with the remote.
Light stays dim or turns off quickly.Battery not fully charged; aging battery.Relocate the light to an area with more direct sunlight. Ensure solar panel is clean. If battery is old, consider replacement (contact support).
Motion sensor not detecting.Sensor obstructed; incorrect mode; sensor malfunction.Clear any obstructions from the sensor. Ensure the light is set to a motion-sensing mode (Mode 1 or 2).
Intelligent linkage not working.Lights too far apart; signal interference.Ensure linked lights are within 66ft (20m) of each other. Check for any large metal objects or strong radio signals that might interfere.
Remote control not working.Remote battery dead; remote out of range; signal obstruction.Replace remote battery. Ensure you are within effective range of the light. Point the remote directly at the light's sensor.

9. User Tips

  • Optimal Placement: For best performance, install the light where the solar panel receives maximum direct sunlight throughout the day. This ensures the battery is fully charged for long-lasting illumination at night.
  • Testing Modes: Experiment with the different lighting modes using the remote control to find the best setting for your specific needs and environment.
  • Intelligent Linkage Setup: When installing multiple lights, place them strategically within 20 meters of each other to fully utilize the intelligent linkage feature for seamless illumination.
  • Seasonal Adjustment: Consider adjusting the solar panel angle seasonally to optimize sun exposure as the sun's path changes.

10. Warranty and Support

10.1 Warranty Information

This Intelamp Solar Street Light (Model YL005-16A) comes with a 2-year warranty from the date of purchase, covering manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

10.2 Exclusions

The warranty does not cover:

  • Damage caused by improper installation or misuse.
  • Damage caused by natural disasters (e.g., lightning, floods, earthquakes).
  • Damage caused by unauthorized repairs or modifications.
  • Normal wear and tear.

10.3 Customer Support

For any questions, technical assistance, or warranty claims, please contact Intelamp customer support through your retailer or the official Intelamp website.

© 2023 Intelamp. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.