Manuals+

FORD-RZ-10/RZ-FD10/RZ-FD60 FORD-RZ-10/RZ-FD10/RZ-FD60

Instruction Manual

16-Pin CANBUS Decoder Harness for Ford Vehicles

Models: FORD-RZ-10, RZ-FD10, RZ-FD60

1. Introduction

This manual provides detailed instructions for the installation and operation of the 16-pin CANBUS Decoder Harness, designed to integrate aftermarket Android radio systems with various Ford vehicles. The CANBUS decoder ensures proper communication between your new head unit and the vehicle's existing electronic systems, enabling features such as steering wheel controls, door status, and reverse gear signals.

2. Product Overview

The product consists of a main 16-pin wiring harness and a CANBUS decoder box. The harness provides power, speaker connections, and various auxiliary inputs/outputs, while the CANBUS decoder translates vehicle data for your Android radio.

Complete 16-pin harness and CANBUS decoder assembly
Figure 1: Complete 16-pin harness and CANBUS decoder assembly.
Detailed view of the main harness with RCA and camera inputs
Figure 2: Detailed view of the main harness with RCA and camera inputs.
Close-up of the CANBUS decoder box
Figure 3: Close-up of the CANBUS decoder box (Model RZ-FD60 shown).
CANBUS decoder box label with part numbers and compatible models
Figure 4: CANBUS decoder box label showing part numbers and compatible models.

3. Compatibility

This CANBUS decoder harness is compatible with the following Ford vehicle models and years when installing an Android radio with Sync functionality:

  • Ford Focus (2011-2019)
  • Ford Fiesta
  • Ford Edge
  • Ford Explore

Please verify your vehicle's specific model and year against the CANBUS decoder label (Figure 4) to ensure full compatibility.

4. Package Contents

Depending on your selected option, your package may include:

  • 16-Pin Main Wiring Harness
  • CANBUS Decoder Box (e.g., RZ-FD60, RZ-FD10, RZ-10)
  • RCA Cable Assembly (for AUX IN L/R, AUX OUT L/R, Video Out, Camera In)
  • USB Extension Cable (if applicable)
  • Antenna Adapter (if applicable)

5. Setup and Installation

Warning: Professional installation is highly recommended. Disconnect the vehicle's battery before beginning any electrical work to prevent short circuits or damage to the vehicle's electrical system.

  1. Prepare the Vehicle: Ensure the vehicle is turned off and the negative terminal of the battery is disconnected. Carefully remove the factory radio/head unit from your Ford vehicle. Refer to your vehicle's service manual for specific removal instructions.
  2. Connect the Main Harness: Connect the 16-pin main wiring harness to the corresponding connector on your new Android radio.
  3. Integrate the CANBUS Decoder: Locate the dedicated connector on the main harness for the CANBUS decoder box. Plug the CANBUS decoder (e.g., RZ-FD60) into this connector. Ensure it is securely seated.
    CANBUS decoder connected to its dedicated harness
    Figure 5: CANBUS decoder connected to its dedicated harness (KRS-FD-01 shown).
  4. Connect to Vehicle: Connect the vehicle-specific end of the 16-pin harness to the factory wiring harness in your dashboard. These connectors are typically plug-and-play.
    Close-up of main harness connectors for vehicle integration
    Figure 6: Close-up of main harness connectors for vehicle integration.
  5. Connect Auxiliary Cables:
    • RCA Cables: Connect the RCA cables (AUX IN, AUX OUT, Video Out) to the corresponding ports on your Android radio and any external devices (e.g., amplifiers, headrest monitors).
    • Camera Input: If installing a reverse camera, connect its video output to the 'CAMERA' RCA input on the harness.
    • USB: Connect any USB extension cables to the radio's USB ports for external storage or device charging.
  6. Secure Connections: Ensure all connections are firm and properly insulated. Avoid loose wires that could cause short circuits or interference.
  7. Test Functionality: Reconnect the vehicle's battery. Turn on the ignition and test the Android radio. Verify power, sound, steering wheel controls, reverse camera (if installed), and any other integrated features.
  8. Reassemble: Once all functions are confirmed, carefully reassemble the dashboard components.

6. Operating Instructions

Once installed, the CANBUS decoder operates automatically to facilitate communication between your Android radio and the vehicle. There are typically no specific operating steps required for the decoder itself. All functions, such as steering wheel controls, will be managed through your Android radio's interface and settings.

  • Steering Wheel Controls: After installation, access your Android radio's settings to configure and map the steering wheel control buttons.
  • Vehicle Information Display: Some Android radios, when paired with a CANBUS decoder, can display vehicle information (e.g., door status, climate control) on the screen. Refer to your Android radio's manual for these features.

7. Maintenance

The CANBUS decoder harness is designed for long-term, maintenance-free operation. To ensure continued performance:

  • Keep all connections secure and free from moisture or excessive vibration.
  • Avoid exposing the CANBUS decoder box to extreme temperatures or direct physical impact.

8. Troubleshooting

Problem Possible Cause Solution
No power to Android radio. Loose power connection, blown fuse, incorrect wiring. Check all power connections. Verify vehicle fuses. Ensure battery is reconnected.
No sound from speakers. Loose speaker connections, incorrect speaker wiring, radio settings. Check speaker wire connections. Verify radio's audio output settings.
Steering wheel controls not working. CANBUS decoder not properly connected, incorrect radio settings, incompatible radio. Ensure CANBUS decoder is fully plugged in. Access your Android radio's settings to configure steering wheel controls. Some radios require specific CANBUS settings.
Reverse camera not displaying. Camera not powered, video cable loose, radio not detecting reverse signal. Check camera power and video connections. Verify the radio's reverse trigger wire is connected (if applicable) and camera input is selected.

9. Specifications

Feature Detail
Item Type Cables, Adapters & Sockets
Voltage 12 V
CANBUS Decoder Models FORD-RZ-10, RZ-FD10, RZ-FD60
Compatibility Ford Focus (2011-2019), Fiesta, Edge, Explore (with Android Radio Sync)
Origin Mainland China
Package Dimensions (approx.) 10 cm (Length) x 10 cm (Width) x 10 cm (Height)
Package Weight (approx.) 0.15 kg

10. User Tips

  • Double-Check Connections: Before reassembling your dashboard, always perform a thorough check of all connections. A loose connection is a common cause of issues.
  • Radio Settings: Many Android radios require specific CANBUS settings to be configured in their system menus. If steering wheel controls or other vehicle features aren't working, check your radio's settings for a 'CANBUS' or 'Factory Settings' option.
  • Firmware Updates: Ensure your Android radio's firmware is up to date, as this can sometimes resolve compatibility issues with CANBUS decoders.

11. Warranty and Support

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Related Documents - FORD-RZ-10/RZ-FD10/RZ-FD60

Preview Renesas RZ Family Microprocessors: High-Performance 64-bit & 32-bit Arm-based MPUs
Explore the Renesas RZ Family of microprocessors, featuring high-performance 64-bit and 32-bit Arm-based MPUs designed for smart society applications. Discover the RZ/V, RZ/G, RZ/A, RZ/T, and RZ/N series with detailed specifications, features, and application fields.
Preview Renesas RZ/G Verified Linux Package v3.0.3 Release Notes
This release note details the Renesas RZ/G Verified Linux Package (VLP/G) version 3.0.3, covering its contents, build environment, instructions, components, restrictions, and notes for embedded system developers using RZ/G series processors.
Preview Renesas RZ/N1D, RZ/N1S, RZ/N1L Group User Manual: System, Electrical, Mechanical Info
Detailed user manual for Renesas RZ/N1D, RZ/N1S, and RZ/N1L microcontroller groups. Covers system introduction, multiplexing, electrical characteristics, mechanical information, and usage guidelines for application system design.
Preview RZ/N1D, RZ/N1S, RZ/N1L Group User's Manual: R-IN Engine & Ethernet Function
This user's manual provides detailed information on the R-IN Engine and Ethernet functionality for the Renesas RZ/N1D, RZ/N1S, and RZ/N1L groups of microcontrollers. It covers hardware features, register descriptions, and operational explanations.
Preview Renesas RZ/G Series Linux Interface Specification Yocto Recipe Start-Up Guide
This start-up guide provides detailed instructions for building and configuring Linux environments using Yocto recipes for Renesas RZ/G1H, RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C processors. It covers system requirements, build processes, and essential setup steps for embedded development.
Preview Reznor Horizontal & Vertical Vent/Combustion Air Kits for Separated-Combustion Systems Installation Guide
Installation guide for Reznor Option CC6 (horizontal) and Option CC2 (vertical) vent/combustion air kits used with Reznor separated-combustion heating equipment. Details application by model, kit components, and required field-supplied items.