RAVEMEN TR30

Contents

RAVEMEN TR30 Bike Rear Light User Manual

Model: TR30

1. Introduction

Thank you for choosing the RAVEMEN TR30 Bike Rear Light. This smart bicycle taillight is designed to enhance your safety on the road with its high visibility, intelligent features, and durable design. Please read this manual carefully before use to ensure proper operation and maintenance.

RAVEMEN TR30 Bike Rear Light mounted on a bicycle seatpost, illuminated brightly.
RAVEMEN TR30 Bike Rear Light mounted and illuminated.

2. Safety Warnings

  • The TR30 contains a Li-Polymer/Li-ion battery. Do not put the light into fire.
  • Charge with a qualified USB power adapter and keep the charging port dry and clean.
  • Do not look directly into the light beam to avoid eye injury.

3. Package Contents

The package includes the following items:

  • 1 x RAVEMEN TR30 Light
  • 1 x USB-C Charging Cable
  • 2 x O-shaped Rubber Rings
  • 1 x User Manual
Contents of the RAVEMEN TR30 package: light, USB-C cable, two O-rings, and user manual.
Package contents of the RAVEMEN TR30.

4. Setup

4.1 Mounting the Light

The TR30 is equipped with a tool-free, flexible rubber mounting O-ring, making it compatible with most round seat posts. Some aero seatposts of similar sizes may also fit.

  1. Select an appropriate O-shaped rubber ring for your seatpost.
  2. Attach the light to the seatpost using the rubber ring, ensuring it is securely fastened and facing backward.
Hands demonstrating how to mount the RAVEMEN TR30 bike light onto a seatpost using an O-ring.
Mounting the TR30 on a bicycle seatpost.

4.2 Initial Charging

Before first use, fully charge the TR30. The hidden USB-C connector makes charging safe and convenient.

  1. Locate the USB-C charging port, usually covered by a rubber flap for water resistance.
  2. Open the rubber flap and connect the provided USB-C cable to the light and a qualified USB power adapter.
  3. The charging indicator will blink red during charging and turn constant green when fully charged.
  4. Standard charging time is approximately 2.2 hours.
  5. Ensure the rubber flap is securely closed after charging to maintain water resistance.
Video demonstrating the operation, charging, and waterproof features of the RAVEMEN TR30.

5. Operating Instructions

5.1 Power Button Functions

  • Turn On/Off: Press the power button for 1.5 seconds.
  • Cycle Modes: Click the power button to cycle through the available lighting modes.

5.2 Auto On-Off and Brake Detection Mode

This intelligent mode enhances safety by automatically adjusting the light based on your riding conditions.

  1. Activation: Press the power button for 3 seconds until the light blinks quickly 5 times.
  2. Brake Detection: In this mode, the light will switch to 10 lumens output for 2 seconds when detecting braking, alerting drivers behind you.
  3. Auto On-Off: The light will switch off automatically after staying still for 2 minutes and turn on with a vibration.
  4. Exit Mode: To exit this mode, turn off the light and then press the power button for 3 seconds until the light blinks slowly 3 times.

Note: This mode does not function in slow flashing mode. The reaction of the brake sensor may vary on different roads.

5.3 Mode Memory Function

The TR30 remembers the last used lighting mode when it is switched off, ensuring you start your next ride with your preferred setting.

5.4 Battery Indicator

To check the battery level, click the power button. The indicator will be on for 2 seconds:

  • Green light: Battery level > 40%
  • Red light: Battery level 5-40%
  • Blinking red light: Low battery, charge your light soon.

6. Maintenance

  • Keep the USB-C charging port dry and clean to prevent damage and ensure proper charging.
  • After charging, always ensure the rubber flap covering the USB-C port is securely closed to maintain the IPX6 water resistance.
  • Clean the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Store the light in a cool, dry place when not in use for extended periods.

7. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Press and hold the power button for 1.5 seconds.
  • Brake sensor not reacting consistently: The reaction of the brake sensor may vary on different road surfaces and conditions. Ensure the light is firmly mounted.
  • Light turning off unexpectedly: Check the battery indicator. If blinking red, recharge the light. Ensure the auto on-off mode is not activated if you prefer continuous operation.
  • Charging issues: Ensure the USB-C cable is properly connected and the charging port is clean and dry. Use a qualified USB power adapter.

8. Specifications

Performance Modes and Run Times
ModeBrightness (lumens)Run time (hrs)
High55
Low210
Warning flashing309.5
Rapid flashing511
Slow flashing0.545

Note: The above data are tested in Lab standard and may vary by environment and user conditions.

Table showing RAVEMEN TR30 light modes, brightness, and run times.
Detailed performance specifications for each mode.

General Specifications

  • Battery: Rechargeable Li-Polymer/Li-ion battery (maximum battery run time is 45 hours)
  • Dimensions: 63mm (L) x 29mm (W) x 21mm (H)
  • Weight: 22.8g
  • Water Resistance: IPX6 (withstands heavy rain)
  • Impact Resistance: 1 meter
  • Input: 5V, DC/140mA
  • Certification: CE, FCC, RoHS
  • Body Material: Plastic
  • Mounting Placement: Seatpost

9. User Tips

  • The light is very bright, especially in strobing mode, providing powerful visibility.
  • The hidden USB-C charging port under the rubber part is a great feature for maintaining water resistance.
  • While the included rubber straps work well for standard seatposts, some users found them short for larger diameter seatposts. Consider checking compatibility or alternative mounting solutions if you have a non-standard seatpost.
  • Battery life is generally satisfactory, with a full charge lasting around 10 hours in some modes and charging in just over 2 hours.
  • Bicycle safety is paramount; a reliable rear light like the TR30 is essential for visibility, especially at night.

10. Warranty and Support

10.1 Warranty Policy

  • Product Warranty: Two (2) years warranty for the products to be free of defects in material and workmanship from the day of purchase under normal use.
  • Accessories and Battery Warranty: One (1) year warranty for accessories and battery.
  • Lifetime Support: Limited lifetime warranty support is provided.

10.2 Warranty Exclusions

The warranty does not cover:

  • Normal wear and tear and normal battery deterioration.
  • Improper use and maintenance, unauthorized modifications or alterations.
  • Absence of a sales receipt or proof of purchase.

10.3 Contact and Further Information

For warranty service or any inquiries, please contact the seller or RAVEMEN directly at service@ravemen.com.

A PDF version of this user manual is also available for download. Please refer to the product page or manufacturer's website for the link.

© 2024 RAVEMEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.