1. Introduction
Thank you for choosing the Ubricks FH XL 6X4 Tractor Volvo FH16 Heavy Duty Truck building block set. This engineering vehicle model offers a realistic car model structure with flexible wheel rotation and is compatible with mainstream building block brands. It is designed to enhance hands-on ability, logical thinking, and spatial imagination.
This set includes 1653 pieces and is recommended for ages 14 and above. The finished model features a 1:20 scale, a detailed D13 engine, triple gear shift, truck header flip, Ackermann steering, electric rear axle lift, and shock absorption.

2. Safety & Warnings
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- This product contains small building block parts, wheel accessories, and tiny connectors.
- Children shall use this product under the continuous supervision of adults.
- Not suitable for children under 6 years old.
- Keep unused small parts away from infants and young children.
- Do not put any parts of the product into the mouth, nose, or ears to avoid suffocation, choking, or ingestion accidents.
- Abnormal use such as violent disassembly and random splicing may cause sharp edges and structural failure, bringing safety risks.
- Please store the product in a dry, cool, and ventilated environment, avoid high temperature, humidity, and direct sunlight, and keep away from fire sources and corrosive substances.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Do not charge the battery unattended.
- Do not charge the battery near heat sources or flammable materials.
- Do not disassemble, crush, puncture, short-circuit, or expose the battery to fire.
- Stop using the battery immediately if it becomes swollen, overheated, leaks, or is damaged.
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Specifications
| Attribute | Detail |
|---|---|
| Product Name | FH Tri-Axle Truck |
| Model Number (NO.) | T001 |
| Brand | Ubricks |
| Scale | 1:20 |
| Quantity | 1653 PCS |
| Version | 2.4G RC & APP RC (Programmable) |
| Recommended Age | 14+ Years Old |
| Product Size (L x W x H) | 36.6 cm x 16.5 cm x 20.4 cm |
| Box Size (L x W x H) | 35.0 cm x 8.5 cm x 25.0 cm |
| Material | High-quality ABS plastic, non-toxic, odorless, durable, smooth edge treatment |


4. Setup
4.1 Unpacking
Carefully unpack the product. Check all building blocks, electronics, remote controller, battery (if equipped), USB cable, and manual. Do not use if any parts are missing or damaged.

4.2 Assembly
Assemble the model following the illustrated instructions provided in the manual. Align blocks and press evenly. Do not apply excessive force to prevent part damage.

4.3 Battery Installation & Charging
Fit batteries into the model and remote controller (if applicable) with correct +/- polarity. Close the battery compartment securely.
Fully charge the rechargeable battery before first use with the supplied USB cable and a certified 5V adapter. Unplug after charging.

5. Operating Instructions
5.1 Power On & Remote Pairing
- Power On: Press and hold the model's power button for about 2 seconds until the indicator lights up.
- Remote Pairing: Turn on the remote after powering up the model. Wait several seconds for automatic pairing. A steady indicator light means pairing succeeds.
5.2 Driving Controls
Operate the model on flat, dry, open ground. Keep hands, hair, and loose clothes clear of moving parts. Avoid collisions, water, sand, and steep slopes.

5.3 Special Functions & Features
The Ubricks FH Tri-Axle Truck model includes several interactive and realistic functions:
- Shock Absorbers: The cockpit features shock absorbers to protect the structure and reduce wear and tear.
- Door Opening and Closing: The truck doors can be manually opened and closed.
- Centre Mesh Opening and Closing: The front grille (centre mesh) can be opened and closed.
- Truck Header Flip: The entire truck cab can be flipped forward to reveal the detailed D13 engine compartment.
- Change Gears: The model features a three-gear shift mechanism for varied operation.
- Rear Axle Electric Lift: The rear axle can be electrically lifted, with automatic connection/disconnection of power transmission after raising/lowering.
- Adapted Towing Plate: A removable trailer can be carried at the rear, thanks to the adapted towing plate.
- High/Low Speed: The RC functions allow for both high-speed and low-speed driving modes.





6. Maintenance & Storage Instructions
6.1 Daily Cleaning
Wipe the surface of building blocks with a clean soft cloth, or rinse briefly with clean water if needed. Do not soak the plastic parts in water for a long time to prevent plastic aging and deformation.
6.2 Storage Method
After use, collect all parts and place them in the original package or a clean storage box to avoid loss of small parts.
6.3 Maintenance Notes
Do not expose the product to high temperature, low temperature, humid environment, or direct sunlight for a long time, as this can cause plastic aging, fading, and brittleness.
6.4 Damaged Parts
If parts are damaged or missing during use, stop using them in time to avoid sharp edges scratching hands.
7. Troubleshooting
- Missing or Defective Parts: If you find defective, wrong, or missing parts during unpacking or assembly, please contact customer service with a parts list and product photos for a free replacement.
- Model Not Responding: Ensure batteries are correctly installed with proper polarity and fully charged. Check that the model and remote control are properly paired (steady indicator light).
- Structural Instability: Avoid violent squeezing, dropping, bending, or pulling the assembled model. Ensure blocks are aligned and pressed evenly during assembly.
- Interference with RC: Ensure you are operating the model in an open area away from other electronic devices that might cause signal interference.
8. User Tips
- Organize Parts: The parts are sorted into small sealed bags. Keep them organized during assembly to make the process smoother.
- Handle with Care: This is a detailed model. Avoid applying excessive force during assembly or play to prevent damage to the blocks or mechanisms.
- Intended Use: Remember this is a static assembly toy designed for entertainment. Do not attempt to refit, modify, or install external power/electronic devices beyond what is specified, as this can create safety hazards and damage the product.
- Indoor Play: For best results and to prevent damage, operate the model on smooth, dry, and even indoor surfaces.
9. Warranty & Support
We provide a 12-month global after-sales warranty service for non-human damage products.
If the product has quality problems, missing parts, or damage during transportation, please contact our customer service team with the order number and product photos for replacement.
Free spare parts service is provided for conventional small parts loss within the warranty period.
For detailed item guides and documents, please refer to the User Manual (PDF) available at this link.
10. Compliance Information
This toy product has passed authoritative professional testing and fully complies with EU, UK, and international toy safety regulations and harmonized standards. It has obtained valid market access compliance certifications and marks to meet overseas sales qualification requirements.
10.1 Applicable Official Regulations & Harmonized Standards:
- EU Toy Safety Directive: 2009/48/EC (Official Toy Safety Directive of the European Union)
- Toy Mechanical & Physical Safety Standard: EN 71-1:2014+A1:2018
- Toy Flammability Safety Standard: EN 71-2:2020
- Toy Toxic Element Migration Limit Standard: EN 71-3:2019+A1:2021
- Hazardous Substance Restriction Directive: 2011/65/EU (RoHS Directive)
10.2 Valid Compliance Markings:
- CE (Conforms to European Union health, safety and environmental protection requirements)
- UKCA (Conforms to UK market entry safety standards)
- FC (Conforms to United States electromagnetic compatibility regulatory requirements)