1. Introduction
The LEEDOAR FA03 is an advanced time attendance recorder designed for efficient employee check-in and management. It supports multiple authentication methods including facial recognition, fingerprint scanning, and password entry. This manual provides detailed instructions on setting up, operating, and maintaining your FA03 device.

Figure 1: FA03 Fingerprint and Facial Recognition Attendance Machine.
Video 1: Product Overview of the FA03 Attendance Machine.
2. Setup
2.1 Powering On
- Connect the provided 5V 1A power adapter to the DC 5V port on the side of the FA03 device.
- Plug the power adapter into a suitable power outlet. The device will automatically power on.

Figure 2: One-step insertion and startup by connecting the power adapter.
2.2 Initial Configuration
Upon first startup, you may need to configure basic settings such as language and time. Use the T9 keyboard and navigation buttons (up/down, OK, ESC) to navigate the menu.
3. Operation
3.1 Employee Registration
To register an employee, follow these steps:
- Press the MENU button to enter the main menu.
- Navigate to Employee Management and press OK.
- Select Employee Registration.
- Input the employee's name and a unique number using the T9 keyboard.
- For facial recognition, select Face and follow the on-screen prompts to register the employee's face. Ensure proper lighting for accurate capture.
- For fingerprint recognition, select Fingerprint and place the employee's finger on the optical sensor multiple times as instructed to ensure a complete registration.
- Optionally, set a password for the employee.
- Press OK to save the registration.
Video 2: Demonstration of employee enrollment, including powering on, navigating the menu, inputting name and number, performing face authentication, and registering a fingerprint.
3.2 Attendance Methods
Employees can check in using any of the registered methods:
- Facial Recognition: Stand in front of the device, aligning your face with the camera. The intelligent fill light design ensures recognition even in low-light conditions.
- Fingerprint Scan: Place your registered finger on the optical fingerprint sensor. The 360° all-direction recognition ensures quick and accurate identification.
- Password Entry: Enter your assigned password using the T9 keyboard.

Figure 3: Intelligent Fill Light Design for clear face recognition even in dark environments.

Figure 4: Fast Fingerprint Recognition using an optical collector, efficiently identifying dry and wet fingers.
4. Data Management
4.1 U Disk Report Export
The FA03 device allows for direct export of attendance reports to a U disk (USB flash drive) without requiring any special software or network connection.
- Insert a FAT32 formatted U disk into the USB port on the side of the device.
- Navigate to the Report or Data Management section in the menu.
- Select the option to Export Data or Download Report.
- The device will generate an Excel spreadsheet (.xls) containing attendance records, which can then be viewed on a computer.

Figure 5: U Disk High-Speed Download Report feature, showing an attendance summary exported to an Excel spreadsheet.
4.2 Report Password Protection
To enhance data security, you can set a password for accessing attendance reports.
- In the menu, navigate to System Settings or Security Settings.
- Find the option for Report Password or Data Security.
- Set a strong password. This password will be required to access the exported attendance reports.

Figure 6: Secure attendance data with the option to set a report password.
5. Features
- Multiple Authentication Methods: Supports Face, Fingerprint, and Password for flexible check-in options.
- Intelligent Fill Light Design: Ensures accurate facial recognition even in dark environments.
- Fast & Intelligent Recognition: Utilizes infrared multi-light source irradiation, high-definition dual cameras, and three-dimensional imaging for precise identification.
- 3D Spectral Algorithm + Infrared Dual-Camera: Enables full-field face recognition with enhanced sensitivity (SmackFaceV2.2 algorithm).
- Fast Fingerprint Recognition: Optical collector technology efficiently identifies both dry and wet fingers. Features 360° all-direction fingerprint recognition.
- High Capacity: Stores up to 500 faces, 1500 fingerprints, 500 passwords, and 100,000 attendance records.
- Rapid Response: Powered by a 32-Bit Dual-Core Processor, ensuring a response time of less than 1 second.
- User-Friendly Display: Equipped with a 2.8-inch TFT Color Screen for clear visuals and a comfortable T9 Keyboard for easy input.
- Multi-Language Support: Available in 8 system languages including Chinese (Simplified/Traditional), English, Portuguese, Spanish, Brazilian Portuguese, French, and Vietnamese.
- Software-Free Operation: Directly exports Excel reports via U disk, eliminating the need for complex software installations.

Figure 7: Key features of the FA03: Infrared face recognition, remote operation, guidance report, high energy chip, wall-mountable, and 2.8-inch TF large screen.

Figure 8: Mighty Capacity: Supports 500 faces, 1500 fingerprints, 500 passwords, and stores 100,000 records.

Figure 9: Supports 8 System Languages: Simplified Chinese, Traditional Chinese, English, Portuguese, Spanish, Brazilian Portuguese, French, Vietnamese.
6. Installation
The FA03 device is designed for easy installation without the need for drilling. It is suitable for mounting on various surfaces.
- Suitable Wall Types: Tile, Marble, Glass, Stainless Steel, Aluminum Alloy, Plastic Board, Lacquered Wood.
- Ensure the mounting surface is clean and dry before installation.
- Use appropriate adhesive or mounting brackets (not included, if applicable) designed for the specific wall type to secure the device.

Figure 10: Response time is less than 1 second. No drilling installation required, suitable for various wall types.

Figure 11: Application scenarios: Suitable for Company, Factory, School, and Supermarket environments.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | FA03 |
| Brand Name | LEEDOAR |
| Attendance Type | Face, Fingerprint, Password |
| Face Capacity | 500 pcs |
| Fingerprint Capacity | 1500 pcs |
| Password Capacity | 500 pcs |
| Record Storage Capacity | 100,000 pcs |
| Display | 2.8-inch TFT Color Screen |
| Processor | 32-Bit Dual-Core Processor |
| Response Time | Less than 1 second |
| Supported Languages | Chinese (Simplified/Traditional), English, Portuguese, Spanish, Brazilian Portuguese, French, Vietnamese |
| Power Supply | 5V 1A |
| Communication Interface | USB (drive free) |
| Data Download | U disk (FAT32 format) |
| Host Dimensions (L*W*H) | 185mm * 155mm * 36mm (approx. 18cm/7in x 13.6cm/5.3in x 3.48cm/1.3in) |
| Package Dimensions (L*W*H) | 195mm * 160mm * 93mm |
| Working Temperature Range | 0-45℃ |
| Storage Temperature Range | 0-50℃ |

Figure 12: Dimensions of the FA03 device: 18cm (7in) height, 13.6cm (5.3in) width, 3.48cm (1.3in) depth.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device's screen and body. Avoid using abrasive cleaners or solvents.
- Sensor Care: Keep the fingerprint sensor and facial recognition camera clean and free from dust or smudges for optimal performance.
- Power Supply: Always use the original 5V 1A power adapter to prevent damage to the device.
- Data Backup: Regularly export attendance data to a U disk to ensure records are safely backed up.
- Environmental Conditions: Operate and store the device within the specified temperature ranges (0-45℃ working, 0-50℃ storage) to prolong its lifespan.
9. Troubleshooting
- Device Not Powering On: Ensure the power adapter is securely connected to both the device and a working power outlet. Verify the power outlet is functional.
- Facial Recognition Failure: Ensure the employee's face is properly aligned with the camera and there is sufficient lighting. Re-register the face if issues persist.
- Fingerprint Recognition Failure: Ensure the finger is clean and dry, and placed correctly on the sensor. Try different fingers or re-register the fingerprint.
- U Disk Not Detected: Ensure the U disk is formatted to FAT32. Try a different U disk if the problem persists.
- Slow Response Time: While the device is designed for fast response, ensure the memory is not excessively full. Regularly export and clear old records if necessary.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official product page where you purchased the device. Keep your purchase receipt as proof of purchase.