LEAP TF6204

Contents

LEAP TF6204 Interval Timer User Manual

Model: TF6204

1. Introduction

The LEAP TF6204 is a versatile electronic interval timer designed for various sports and fitness activities. It features both interval countdown and counting up stopwatch modes, along with alarm and vibration functions, making it an ideal companion for workouts like Boxing, Tabata, Yoga, HIIT, Cardio, MMA, Kettlebell, Weight training, Running, and Stretching.

2. Features

  • Versatile Use: Suitable for Crossfit, Tabata, Yoga, HIIT, Cardio, MMA-Boxing, Kettlebell, Weight training, Running, Stretch, and other sport trainings.
  • Interval Timer: Set 1 or 2 intervals with durations from 2 seconds up to 99 minutes 59 seconds, and 2-99 repeats.
  • Counting Up Timer: Measures time up to 99 hours 59 minutes 59 seconds with 1/100 second precision.
  • Alarm Functions: Features both audible beep and vibration alerts.
  • Power Off Function: Conserves battery life when not in use.
  • Secure Belt Clip: For convenient attachment during workouts.
  • Compact Design: Product size 65mm x 52mm x 26.5mm, weighing approximately 44g (including battery).

3. Package Contents

  • 1 x LEAP TF6204 Interval Timer

Note: 1x AAA (1.5V) battery is required and not included in the package. Please prepare a AAA battery for use.

4. Product Overview

Front view of LEAP TF6204 Interval Timer

Figure 1: Front view of the LEAP TF6204 Interval Timer, showing the display and branding.

Angled view of LEAP TF6204 Interval Timer

Figure 2: Angled view highlighting the side button.

Back view of LEAP TF6204 Interval Timer with belt clip

Figure 3: Back view showing the secure belt clip.

Button Guide

  1. NEXT Button: Used for navigating settings and confirming selections.
  2. START Button: Initiates, pauses, and resets timing functions.
  3. LCD Screen: Displays time, intervals, repeats, and alarm type.
  4. Battery Cover: Located on the back, protects the battery compartment.
  5. Back Clip: For attaching the timer to clothing or equipment.

LCD Display Indicators

  • Interval Countdown Mode:
    • BH: First interval time
    • ALM: Alarm type indicator
    • Top-left number (e.g., 10): Number of repeats
    • Bottom-right number (e.g., 1:00): Second interval time
  • Counting Up Mode:
    • BL: Hour indicator
    • 00:01: Minute and Second display
    • 71: 1/100 Second display
    • ALM: Alarm type indicator

5. Setup

5.1 Battery Installation

  1. Locate the battery cover on the back of the timer (refer to Figure 3).
  2. Slide the battery cover downwards to open the compartment.
  3. Insert one AAA (1.5V) battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
  4. Battery compartment open with battery visible

    Figure 4: Battery compartment open, showing battery insertion.

    Battery inserted into the timer

    Figure 5: Battery correctly inserted.

  5. Slide the battery cover back into place until it clicks securely.

5.2 Power On/Off

  • Power On: Press any button to turn on the timer.
  • Power Off: Hold the [NEXT] button for 2 seconds to shut off the timer.

6. Operating Instructions

Detailed user manual diagram for LEAP TF6204

Figure 6: Original user manual diagram with detailed instructions.

6.1 Switching Between Counting Modes

  • From Countdown to Count Up: In the start of countdown mode, hold [NEXT] and press [CHANGE] to switch to counting up timer mode.
  • From Count Up to Countdown: In the start of counting up mode, hold [NEXT] and press [CHANGE] to switch to counting down timer mode.

6.2 Countdown Timer Setting

  1. Enter Setup: In countdown mode, press the [CHANGE] button. When 'SETUP' appears, press the [NEXT] button. Then, press [CHANGE] to select either 1 or 2 intervals.
  2. Set Interval Times: Press [NEXT] to set the interval time. When the first digit of the interval time flashes, use the [CHANGE] button to adjust the time. Repeat for all digits and the second interval if selected.
  3. Set Number of Repeats: After setting interval times, press [NEXT]. When the first digit of the repeats flashes, use the [CHANGE] button to adjust the number of repeats (00-99).
    • Repeats Counting Upward: If the number of repeats is '00', there is no box around the repeats. The count will increase by 1 at the end of each cycle.
    • Repeats Counting Downward: If the number of repeats is '1-99', there is a box around the repeats. The count will decrease by 1 at the end of each cycle.
  4. Set Alarm Type: After setting the number of repeats, press [NEXT]. Use the [CHANGE] button to select the alarm type: BH (Beep High), SL (Beep Low), V (Vibrate) + BH, V (Vibrate) + SL, or None.
  5. Set Alarm Duration: After selecting the alarm type, press [NEXT]. Use the [CHANGE] button to choose an alarm duration of 1, 2, 5, or 9 seconds.
  6. Exit Setup: After completing the alarm duration setting, press [NEXT] to exit setup.

6.3 Countdown Timer Operating Steps

  1. Start: Press the [START] button. A beep will sound to indicate the start of timing. The timer will beep at the end of the first interval, then proceed to the second interval. After the second interval, it beeps again, completing one repeat.
  2. Pause: During operation, press the [START] button 3 times within 2 seconds to pause the timer. Press [START] again to resume.
  3. Reset: During operation, hold the [START] button for 3 seconds to return to the previously set variables. Press [START] to resume timing from the reset point.
  4. End:
    • If counting up, it will return to the previous variable after 99 repeats.
    • If counting down, it will beep for 15 seconds when the time reaches zero, then return to the previous variable.
    • If time is zero, press [START] once to pause for 3 seconds and continue beeping. Press [START] twice to stop the alarm and return to the previous variable.

6.4 Counting Up Timer Operating Steps

  1. Switch to Count Up Mode: In countdown mode, hold [NEXT] and press [CHANGE] to switch to counting up timer mode.
  2. Start/Pause: Press the [START] button to begin timing. Press [START] again to pause the timer.
  3. Reset: During a pause, press [CHANGE] button to reset the timer to zero.
  4. Clear Data: The timer will clear data and restart counting when it reaches 99 hours 59 minutes 59 seconds, displaying Hour-Minute-Second 1/100 Second.

7. Maintenance

  • Keep the timer away from direct sunlight or high temperatures.
  • Avoid contact with corrosive liquids and protect from sharp, hard object impacts.
  • Replace the battery promptly when the display becomes weakened to ensure optimal performance.

8. Troubleshooting

Timer not turning on or display is dim:
Check if the AAA battery is inserted correctly with the right polarity. If the display is dim, replace the battery with a fresh one.
Timer not responding to button presses:
Ensure the timer is not in a paused state. Try holding the [NEXT] button for 2 seconds to power off, then power on again. If issues persist, replace the battery.
Alarm not sounding or vibrating:
Verify that an alarm type (BH, SL, V+BH, V+SL) has been selected during setup and not set to 'None'. Check battery level.

9. Specifications

AttributeValue
Model NumberTF6204
Power Supply1x AAA Battery (1.5V)
Battery IncludedNo
Interval Time Range2 seconds to 99 minutes 59 seconds
Number of Repeats2-99
Counting Up Time RangeUp to 99 hours 59 minutes 59 seconds (1/100s precision)
Alarm TypesBeep (High/Low), Vibration, Vibration+Beep, None
Product Size65mm x 52mm x 26.5mm
Product Weight44g (including battery)
OriginMainland China
Performance StandardGB/T 22978-2008

10. User Tips

  • For optimal battery life, always power off the device when not in use by holding the [NEXT] button for 2 seconds.
  • If you notice the display becoming faint or unresponsive, it's a good indicator that the AAA battery needs to be replaced.
  • Experiment with different alarm types (beep, vibrate, or both) to find what works best for your training environment.
  • Utilize the secure belt clip to keep the timer easily accessible and visible during dynamic workouts.

11. Warranty and Support

The LEAP TF6204 Interval Timer comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects but excludes the battery and any physical damage caused by misuse, accident, or unauthorized modifications.

For support or warranty claims, please contact your retailer or the manufacturer with your purchase details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.