1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Dongcheng Angle Grinder. Please read this manual thoroughly before using the tool and keep it for future reference.

A powerful handheld electric tool designed for grinding, polishing, and cutting various materials.
1.1 Product Overview
The Dongcheng Angle Grinder series includes several models (S1M-FF03-100A, S1M-FF04-100BS, S1M-FF05-100B, SIM-FF06-100, SIM-FF09-100S, SIM-FF10-100, SIM-FF13-100, SIM-FF17-100) designed for versatility and performance in grinding, polishing, and cutting applications. These tools are equipped with robust motors and are suitable for both professional and DIY use.

The image displays different models of the angle grinder, highlighting their similar design and function across the series.
2. Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.
- Wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.
- Ensure the workpiece is securely clamped before operation.
- Keep the work area clean and well-lit.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool.
- Avoid accidental starting. Ensure the switch is in the off-position before plugging in.
- Do not overreach. Keep proper footing and balance at all times.
- Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
3. Setup and Assembly
Before first use, ensure all components are present and correctly assembled.
3.1 Unpacking and Inspection
Carefully remove the angle grinder and all accessories from the packaging. Inspect for any damage that may have occurred during transit. If any parts are damaged or missing, do not operate the tool and contact customer service.
3.2 Included Accessories (FF03-100A Example)

This image illustrates the FF03-100A model and its typical accessories, including an assisted handle, carbon brush pair, protective cover, and wrench.
- Assisted Handle (x1)
- Carbon Brush (x1 pair)
- Protective Cover (x1)
- Wrench (x1)
- Grinding Wheel Disc (not always included with bare metal units)
3.3 Attaching the Assisted Handle
Screw the assisted handle into one of the threaded holes on the grinder's gear housing. Ensure it is tightened securely for safe operation and better control.
3.4 Installing the Protective Cover
Position the protective cover over the grinding wheel area. Adjust it to provide maximum protection for your hands and face from sparks and debris. Secure it firmly using the provided fasteners or mechanism.
3.5 Mounting the Grinding/Cutting Disc
- Ensure the grinder is unplugged.
- Press the spindle lock button to prevent the spindle from rotating.
- Place the inner flange onto the spindle.
- Mount the desired grinding or cutting disc onto the spindle, ensuring it sits flush against the inner flange.
- Place the outer flange over the disc.
- Use the provided wrench to tighten the outer flange nut securely. Do not overtighten.
- Release the spindle lock.
4. Operating Instructions
Familiarize yourself with the grinder's controls and functions before starting any work.
4.1 Powering On/Off
The grinder typically features a side switch for power control. To turn on, slide the switch to the "ON" position. To turn off, slide it back to the "OFF" position. Always ensure the switch is off before plugging or unplugging the tool.
4.2 General Operation Tips
- Always hold the grinder firmly with both hands, using the main handle and the assisted handle.
- Allow the disc to reach full speed before contacting the workpiece.
- Apply light, even pressure. Do not force the tool, as this can lead to kickback or damage.
- Maintain a safe distance from the rotating disc and direct sparks away from yourself and others.
- For cutting, make shallow passes rather than attempting to cut through thick material in one go.
4.3 Applications

The angle grinder is suitable for various tasks including polishing wood, polishing metal, cutting stone, and cutting wood.
- Wood Polishing: Use appropriate sanding discs for smoothing wood surfaces.
- Metal Polishing: Utilize polishing pads or wire brushes for cleaning and shining metal.
- Stone Cutting: Employ diamond cutting discs for precise cuts in stone and masonry.
- Wood Cutting: Use specialized wood-cutting discs for efficient wood processing.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your angle grinder.
5.1 Cleaning
- Always unplug the tool before cleaning.
- Clean the ventilation openings regularly to prevent overheating. Use compressed air if available.
- Wipe the tool housing with a damp cloth. Do not use harsh chemicals or solvents.
5.2 Carbon Brush Replacement
Carbon brushes wear down over time and need replacement. Refer to the included accessories image (Figure 3) for the location of carbon brushes. When the motor performance decreases or sparks become excessive, it's time to replace them. Consult a qualified technician if you are unsure.
5.3 Storage
Store the angle grinder in a dry, secure place out of reach of children. Ensure the power cord is neatly coiled and not kinked.
6. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder does not start | No power supply; Faulty switch; Worn carbon brushes | Check power outlet and cord; Inspect/replace switch; Replace carbon brushes |
| Excessive sparking from motor | Worn carbon brushes; Dirty commutator | Replace carbon brushes; Clean commutator (professional service recommended) |
| Reduced power/speed | Worn carbon brushes; Overload; Loose connections | Replace carbon brushes; Reduce load; Check power connections |
| Excessive vibration | Damaged or improperly mounted disc; Loose components | Inspect and replace disc if damaged; Ensure disc and handle are securely mounted |
7. Specifications
Specifications may vary slightly between models. Please refer to the specific model details for precise information.
7.1 Model S1M-FF04-100BS

This image presents a table of technical parameters for the S1M-FF04-100BS angle grinder.
| Parameter | Value |
|---|---|
| Rated voltage | 220V |
| Rated frequency | 50Hz |
| Maximum diameter of grinding wheel disc | Φ100mm |
| Grinding wheel aperture | Φ16mm |
| Rated input power | 850W |
| Rated speed | 13000r/min |
| Net weight | 1.6Kg |
7.2 Model FF03-100A/710W
| Parameter | Value |
|---|---|
| Rated frequency | 50Hz |
| Maximum diameter of grinding wheel disc | Φ100mm |
| Grinding wheel aperture | Φ16mm |
| Rated input power | 710W |
| Rated speed | 13000r/min |
| Net weight | 1.6Kg |
Note: The bare metal unit for FF03-100A does not include accessories by default.
8. User Tips
Based on general user feedback for angle grinders:
- Always double-check the disc type and condition before starting work.
- For prolonged use, take short breaks to prevent tool overheating and operator fatigue.
- Ensure proper ventilation in your workspace, especially when cutting or grinding materials that produce fine dust.
- Keep spare carbon brushes on hand for quick replacement to maintain optimal performance.
9. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or contact the seller directly. General service commitments include:
- Return & Refund Policy: Details regarding product returns and refunds can be found on the seller's platform.
- Fast Delivery Guarantee: This may include compensation for delayed delivery, refunds for lost packages, or refunds for damaged items during transit.
- Security & Privacy: The seller commits to safe payments and secure handling of personal details.
For technical support or inquiries about your specific model, please contact the NumberOne00602 Store directly.