1. Introduction
The MESTEK EMF02R is a digital high-frequency electromagnetic radiation meter equipped with a precision high-frequency electromagnetic sensor. It is designed to accurately detect electromagnetic radiation, electric field radiation from various electrical equipment, and high-frequency radiation from base stations through microchip processing.
This instrument offers convenient use, simple operation, a dual display, and a buzzer alarm. It can measure electromagnetic radiation, electric field radiation, and high-frequency radiation, making it suitable for a wide range of applications including homes, offices, living areas, industrial environments, high-speed rail, and high-frequency signal base stations.
1.1. Safety Information
Before operating or maintaining this instrument, please read the following information carefully and use the instrument according to these instructions:
- After storage and shipment in harsh environments, check and confirm that the instrument is not damaged.
- The instrument must be operated within the specified environmental temperature and humidity ranges.
- If any abnormality or malfunction occurs during use, discontinue operation immediately.
- Do not store or use the instrument in direct sunlight, high temperatures, or humid environments.
- Non-professional maintenance personnel are strictly forbidden to open, adjust, or repair this instrument.
- If dust accumulates on the instrument, wipe it with a clean, moist, dust-free cloth. Do not use solvents or abrasives for cleaning.
- During measurement, keep the instrument away from bare conductors or high-voltage devices to prevent electric shock.
2. Components and Controls
Familiarize yourself with the main components and control buttons of your EMF02R meter.
Figure 1: MESTEK EMF02R Appearance and Key Features
2.1. Key Introduction
Figure 2: Control Buttons
| Symbol | Description |
|---|---|
| Power button | Turns the unit on or off. |
| SEL | Function conversion key (switches between E-field, H-field, and their units). |
| AVG/MAX | Toggles between Average (AVG) and Maximum (MAX) value display. |
| HOLD | Data lock key (freezes the current reading on the display). |
| Buzzer icon | Turns the audible alarm on or off. |
| RF | High-frequency signal conversion key (enters RF measurement mode). |
3. Setup
3.1. Charging the Battery
The EMF02R is powered by a built-in 18650/2000mA/3.7V lithium battery. Before first use, or when the battery indicator on the screen shows low battery, charge the unit.
- Use a 5V/1A USB Type-C charging cable and an adapter that meets relevant safety certification requirements.
- Charge the device in a well-ventilated area with good heat dissipation.
- The charging indicator light will turn red during charging and green when fully charged.
- A full charge takes approximately 4 hours.
- Unplug the charging cable once charging is complete to avoid prolonged charging.
- The instrument will automatically turn off during charging and cannot be started. It can be used normally once charging is complete or stopped.
Figure 3: USB Type-C Charging
4. Operation
4.1. Power On/Off
Long press the Power button to turn the unit on or off.
4.2. Measurement Modes
The EMF02R supports three main measurement modes: High-frequency (RF), Electric Field (E-field), and Magnetic Field (H-field).
Figure 4: Measurement Modes and Examples
- High-frequency (RF) Signal Radiation Measurement: Short press the RF button. The screen will display "RF" indicating entry into high-frequency signal radiation measurement mode. This mode can measure high-frequency signal radiation from base stations between 30 MHz and 8 GHz.
- Electric Field (E-field) Radiation Measurement: Short press the SEL button. The screen will display "E-field" indicating entry into electric field radiation measurement mode. This mode measures the electric field radiation value of electrical equipment.
- Magnetic Field (H-field) Radiation Measurement: Short press the SEL button. The screen will display "H-field" indicating entry into electromagnetic field radiation measurement mode. Short press the SEL button again to cycle through the electromagnetic field radiation measurement units (mG milliGauss → uT micro Tesla) to measure the electromagnetic radiation values of electrical equipment.
4.3. Data Hold (HOLD)
Short press the HOLD button to lock or unlock the current data displayed on the screen.
4.4. Average/Maximum Value (AVG/MAX)
Short press the AVG/MAX button to cycle through displaying the maximum value (MAX), average value (AVG), or canceling this function.
4.5. Buzzer Control
Short press the Buzzer icon button to turn the audible alarm on or off.
4.6. Automatic Shutdown Function
The device has an automatic shutdown feature after approximately 15 minutes of inactivity to conserve battery. To disable this function:
- With the unit turned off, press and hold the HOLD button and the Power button simultaneously.
- Release the buttons once the screen lights up. The automatic shutdown symbol (power icon) in the upper left corner of the display will disappear, indicating the function is canceled.
- To restore the automatic shutdown function, simply restart the device after a manual shutdown.
Video 1: Product demonstration showing power on, mode switching, and data hold functions.
5. User Tips
- The large, clear display makes readings easy to interpret, even from a distance.
- The ergonomic design ensures the meter fits comfortably in hand for extended use.
- Always ensure the device is fully charged for accurate and uninterrupted measurements.
6. Troubleshooting and Alarms
6.1. Radiation Alarm
When measuring, hold the instrument and slowly move the probe towards the suspected radiation source. If the radiation value displayed on the screen reaches the yellow area of the analog bar, the instrument will emit an audible alarm. This indicates that the radiation level exceeds the safe standard. In such cases, take protective measures or increase your distance from the radiation source.
Figure 5: Radiation Area Comparison Table
6.2. Low Battery Indication
When the battery icon appears on the screen, it indicates that the battery is low. Please charge the unit as soon as possible to ensure continued accurate operation.
6.3. General Malfunctions
If the instrument exhibits any abnormality or failure not covered here, please stop using it and refer to the warranty and support information for assistance.
7. Technical Specifications
| Parameter | Value |
|---|---|
| Working Height | 2000m |
| Measurement Method | Electromagnetic induction, RF receiving sensor |
| Display Screen | VA reverse display color screen |
| Maximum Display | 9999 |
| Sampling Rate | About 0.4 seconds |
| Measuring Range | V/m: 0~999 | uT: 0.00~19.99 | mG: 0.0~199.9 | uW/cm²: 0.0~9999 |
| Test Bandwidth | 30MHz~8GHz |
| Resolution Ratio | V/m: 1 | uT: 0.01 | mG: 0.1 | uW/cm²: 0.1 | °C: 0.1 | °F: 0.2 | %RH: 1 |
| Alarm Method | Sound, analog bar |
| Automatic Shut-down | About 15 minutes |
| Operation Current | About 50mA |
| Charging Interface | USB Type-C |
| USB Charging | 5V/1A |
| Power Supply | Built-in 18650/2000mA/3.7V lithium battery |
| Charging Time | About 4 hours |
| Temperature Measurement Range | 0~50°C |
| Humidity Measurement Range | 0~90%RH |
| Working Temperature and Humidity | 0~50°C / 0~90%RH |
| Storage Temperature and Humidity | -10~60°C / 0~80%RH |
| Size | 204 × 63 × 32mm |
| Weight | Approximately 220g |
8. Maintenance
- Cleaning: If dust accumulates on the instrument, wipe it with a clean, moist, dust-free cloth. Do not use solvents or abrasive cleaners, as these can damage the device.
- Storage: Store the instrument in a cool, dry place, away from direct sunlight, high temperatures, and high humidity.
- Battery Care: To prolong battery life, avoid leaving the device fully discharged for extended periods. Charge it regularly, even if not in frequent use.
9. Warranty and Support
The MESTEK EMF02R EMF Meter typically comes with a one-year warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the manufacturer directly.
This product is certified with CE, EAC, FCC, GMP, RoHS, and UL, ensuring compliance with international safety and quality standards.
A detailed user manual in PDF format is available for download: View User Manual (PDF).
10. Included Accessories
The following items are included with your MESTEK EMF02R EMF Meter:
Figure 6: Product Accessories
- 1x High-frequency radiation detector (EMF02R unit)
- 1x USB Type-C charging cable
- 1x Product manual
- 1x Cloth bag (or Storage bag)