iScooter W8

Contents

iScooter W8 E-Scooter User Manual

Model: W8

1. Safety Information

⚠ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

  • Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
  • Ensure all screws and quick releases are securely fastened before each ride.
  • Do not ride in heavy rain, on icy surfaces, or through deep puddles.
  • Avoid riding on public roads if local regulations prohibit it.
  • Maintain a safe distance from other vehicles and pedestrians.
  • Do not perform stunts or sudden maneuvers.
  • The scooter is designed for one rider only. Do not carry passengers.
  • Observe the maximum load capacity of 120 kg (220 lbs).
  • Children should only operate the scooter under adult supervision.

2. Product Overview

The iScooter W8 is a high-performance adult electric scooter designed for urban commuting and off-road adventures. It features a powerful motor, long-range battery, and smart app connectivity for an enhanced riding experience.

iScooter W8 E-Scooter with key specifications

Figure 2.1: iScooter W8 E-Scooter highlighting 48V14Ah Battery, 40KM/H Max Speed, 750W Max Motor Power, 30-40km Flight Duration, and 9.3 inch Tire size.

Key Features:

  • Powerful Motor: Available with a 750W brushless motor (or 500W variant).
  • Long-Range Battery: 48V 14Ah Lithium-ion battery (or 48V 10.4Ah variant).
  • Off-Road Capability: 9.3-inch pneumatic off-road tires and dual shock absorption.
  • Smart Connectivity: APP control for various settings and real-time data.
  • Safety Lighting: Headlights, handlebar turn signals, and taillights.
  • Foldable Design: Easy and fast folding for portability and storage.
  • High Load Capacity: Supports up to 120 kg (220 lbs).

Components:

Labeled diagram of iScooter W8 components

Figure 2.2: Key components of the iScooter W8, including Headlights, Folding Buckle, Mantis Front Shock Absorber, 9.3-inch tires, Front Disc Brake, Rear Drum Brake, and Rear Shock Absorber.

3. Specifications

FeatureSpecification (750W Model)Specification (500W Model)
Model NumberiScooter W8iScooter W8
Motor Power750W Brushless Motor500W Brushless Motor
Battery Capacity48V 14Ah Lithium-ion48V 10.4Ah Lithium-ion
Max Speed40 km/h (after unlocking)40 km/h (after unlocking)
Range Per Charge30-45 km30-40 km
Charging Time6-8 hours6-8 hours
Tire Size9.3 inch Pneumatic Off-road9.3 inch Pneumatic Off-road
Max Climb Angle15°15°
Load Capacity120 kg (220 lbs)120 kg (220 lbs)
FoldedYesYes
Dimensions (Approx.)Height: 123cm (48in), Length: 117cm (46in), Handlebar Width: 43cm (17in)Height: 123cm (48in), Length: 117cm (46in), Handlebar Width: 43cm (17in)
WeightApprox. 21 kgApprox. 21 kg
CertificationCECE
iScooter W8 dimensions and load capacity

Figure 3.1: iScooter W8 dimensions and load capacity.

4. Setup

4.1 Unboxing and Initial Assembly

  1. Carefully remove the scooter and all accessories from the packaging.
  2. Unfold the scooter by releasing the folding buckle. Ensure the stem is securely locked in the upright position.
  3. Attach the handlebars if they are not pre-installed. Ensure all connections are tight.
  4. Check all visible cables and connections for any damage.

4.2 Initial Charging

Before your first ride, fully charge the scooter's battery.

  1. Locate the charging port, usually on the side of the deck.
  2. Connect the charger to the scooter, then plug the charger into a power outlet.
  3. The charger indicator light will typically show red during charging and turn green when fully charged.
  4. Charging time is approximately 6-8 hours. Do not overcharge.

5. Operation

5.1 Power On/Off

  • To power on: Press and hold the power button on the display for a few seconds.
  • To power off: Press and hold the power button again until the display turns off.
Handlebar display showing speed, battery, and controls

Figure 5.1: Handlebar display showing real-time speed, battery level, speed gears, cruise control, and app connection status.

5.2 Speed Modes

The iScooter W8 features multiple speed modes. The default factory speed setting is 25 km/h. To unlock the maximum speed of 40 km/h, please contact customer service for instructions or a video guide.

  • To switch speed modes: Press the thumb button throttle 3 times quickly.
Thumb button throttle for speed mode switching

Figure 5.2: Thumb button throttle for switching speed modes.

Table of 8 speed modes for iScooter W8

Figure 5.3: Available speed modes, including 'Original Drive' and 'Cracking Speed' options.

5.3 Lighting and Turn Signals

The scooter is equipped with omni-directional lights for safety.

  • Headlights: Turn on/off via the control panel or app.
  • Taillights: Automatically activate with headlights and act as brake lights.
  • Handlebar Turn Signals: Use the designated switch on the handlebar to indicate turns.
Omni-directional lights: Headlights, Turn Signals, Taillights

Figure 5.4: Illustration of the scooter's headlights, handlebar turn signals, and taillights.

5.4 Smart APP Connection

Connect your iScooter W8 to the X-Scooter App for advanced control and monitoring.

  1. Download the X-Scooter App from your smartphone's app store.
  2. Ensure Bluetooth is enabled on your phone and scooter.
  3. Open the app and follow the on-screen instructions to pair with your scooter.

The app allows you to:

  • Monitor riding records and battery life.
  • Adjust speed modes and cruising parameters.
  • Control lights and lock/unlock the scooter.
  • Switch between metric and imperial measurement systems.
  • Reset mileage and view car status.
  • Adjust brake sensitivity and acceleration parameters.
X-Scooter App interface for scooter control

Figure 5.5: X-Scooter App interface showing various adjustable parameters.

Smart APP and LCD Display features

Figure 5.6: Smart APP and LCD Display features including riding record, battery life, speed mode, light control, cruise control, and lock/unlock.

6. Maintenance

6.1 Battery Care and Charging

  • Always use the original charger provided with the scooter.
  • Do not charge the battery in extreme temperatures.
  • Store the scooter in a cool, dry place when not in use, ideally with the battery charged to 50-70%.
  • If storing for extended periods, charge the battery every 1-2 months to prevent deep discharge.
  • Avoid completely draining the battery before recharging.

6.2 Cleaning

  • Wipe the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents.
  • Ensure the charging port cover is securely closed before cleaning.

6.3 Tire and Brake Inspection

  • Regularly check tire pressure and inflate to the recommended PSI (refer to tire sidewall).
  • Inspect tires for wear and tear, punctures, or damage.
  • Test brakes regularly to ensure they are functioning correctly. Adjust if necessary.

6.4 General Inspection

  • Periodically check all bolts and fasteners for tightness.
  • Lubricate moving parts as recommended by the manufacturer (e.g., folding mechanism).

7. Troubleshooting

ProblemPossible CauseSolution
Scooter does not power onLow battery; Loose connections; Faulty power buttonCharge battery; Check all cable connections; Contact support if issue persists
Reduced range or speedLow tire pressure; Battery degradation; Riding uphill/heavy loadInflate tires; Ensure full charge; Adjust riding style
Brakes not effectiveBrake pads worn; Cable tension incorrectInspect and replace brake pads; Adjust brake cable tension
App not connectingBluetooth off; App not updated; Scooter not in pairing modeEnsure Bluetooth is on; Update app; Restart scooter and app
Unusual noisesLoose components; Debris in wheels/brakesInspect and tighten all fasteners; Clean wheels and brakes

8. User Tips

  • Unlocking Speed: The scooter's default speed is 25 km/h. To reach the maximum speed of 40 km/h, you will need to contact customer service for a video guide on how to unlock this feature.
  • Pre-Ride Check: Always perform a quick check of tire pressure, brakes, and all connections before each ride for safety.
  • App Customization: Utilize the X-Scooter App to fine-tune settings like brake sensitivity and acceleration to match your riding preference and local conditions.
  • Folding for Transport: The scooter is lightweight (approx. 21kg) and folds easily, making it convenient for transport in a car trunk or carrying when not riding.
Person folding iScooter W8 and placing it in a car trunk

Figure 8.1: The iScooter W8 features an easy and fast folding mechanism for convenient storage and transport.

9. Warranty and Support

For any product-related issues, please contact customer service. When contacting support, it is helpful to have your purchase information and any unboxing videos or photos ready to facilitate the process.

  • Customer Service: Refer to your purchase platform or seller's contact information for support.
  • Unboxing Video: It is recommended to take an unboxing video when disassembling the parcel to protect your rights and interests in case of any discrepancies.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.