1. Introduction
The Mestek EMF01 Electromagnetic Radiation Tester is a versatile device designed to detect and measure electromagnetic radiation (EMF) in various environments. It provides accurate readings for both electric and magnetic fields, along with ambient temperature. This manual will guide you through the setup, operation, and maintenance of your EMF01 tester to ensure safe and effective use.

2. Product Features
- Three-Direction Signal Detection: Highly sensitive X, Y, Z axial induction probe for comprehensive electric and magnetic field measurement.
- Multiple Unit Switching: Supports uT, mG, and V/m units for radiation measurement, and °C/°F for temperature.
- Measurement Modes: Includes Maximum (MAX) and Average (AVG) value measurement.
- Data Hold: Retains current readings on the display.
- Alarm Function: Built-in buzzer for audible alerts when radiation levels exceed safe thresholds.
- Digital and Analog Display: Clear VA reverse display color screen with both numerical and graphical representations of readings.
- Low Battery Indicator: Provides a prompt when battery power is low.
- Automatic Power Off: Conserves battery life by automatically shutting down after approximately 10 minutes of inactivity.
- Durable Design: Features a shockproof rubber shell for enhanced durability and resistance to falls.


3. Package Contents
Upon opening your Mestek EMF01 package, please verify that all the following items are included:
- Mestek EMF01 Device
- Packing Box
- User Manual
- Screwdriver
- Velvet Bag

4. Setup
4.1 Battery Installation
The Mestek EMF01 requires 3 AAA batteries (not included). To install the batteries:
- Locate the battery compartment on the back of the device.
- Use the provided screwdriver to open the battery cover.
- Insert 3 AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover and secure it with the screwdriver.
4.2 Initial Power On
After installing the batteries, press and hold the blue power button (labeled with a power symbol) to turn on the device. The display will light up, and the device will begin its measurement cycle.
5. Operating Instructions
5.1 Power On/Off
- To turn on: Press and hold the blue power button.
- To turn off: Press and hold the blue power button again. The device will also automatically power off after approximately 10 minutes of inactivity.
5.2 Switching Measurement Units
Press the 'SEL' button to cycle through the different measurement units for electromagnetic fields (uT, mG, V/m) and temperature (°C, °F).
5.3 Data Hold Function
Press the 'HOLD' button to freeze the current readings on the display. Press 'HOLD' again to resume real-time measurement.
5.4 Maximum and Average Value Measurement
Press the 'AVG MAX' button to switch between displaying the average (AVG) and maximum (MAX) detected radiation values.
5.5 Buzzer Alarm
Press the speaker icon button to toggle the audible alarm on or off. When the alarm is on, the device will emit a sound if detected radiation levels exceed the preset safe thresholds.
5.6 Interpreting the Display
The EMF01 features a digital and analog color display. The central numerical display shows the current measurement. The circular analog bar indicates the radiation level, typically color-coded:
- Green Zone: Safe levels.
- Yellow Zone: Cautionary levels.
- Red Zone: Harmful levels, indicating radiation exceeds the standard.
The display also shows ambient temperature and battery status.



6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries promptly when the low battery indicator appears to ensure accurate readings.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
- Handling: The device features a shockproof rubber shell, but avoid unnecessary drops or impacts to maintain its accuracy and longevity.
7. Troubleshooting
- Device does not power on: Check if batteries are installed correctly and have sufficient charge. Replace if necessary.
- Inaccurate readings: Ensure the device is not near strong magnetic fields or other sources of interference that could affect its sensors. Check battery level.
- No display: Verify battery installation and charge. If the issue persists, contact customer support.
- Buzzer not working: Check if the buzzer alarm is enabled using the speaker icon button.
8. Specifications
| Parameter | Value |
|---|---|
| Working height | 2000m |
| Measurement mode | Electromagnetic induction |
| Display | VA reverse display color screen |
| Maximum display | 9999 |
| Sampling rate | About 0.4 second |
| Measuring range (V/m) | 0~9999 |
| Measuring range (uT) | 0~74 |
| Measuring range (mG) | 0~740 |
| Resolution (V/m) | 1 |
| Resolution (uT) | 0.01 |
| Resolution (mG) | 0.1 |
| Bandwidth | 5-3500MHz |
| Automatic shutdown | About 10 minutes |
| Operating current | About 20mA |
| Power supply | 1.5V x 3 AAA |
| Measuring temperature range | -10~60°C |
| Working temperature and humidity | 0~60°C / 0~85%RH |
| Storage temperature and humidity | -10~60°C / 0~80%RH |
| Size | 170x73x33mm |
| Weight | About 160g (without battery) |


9. User Tips
- Optimal Placement: For best results, hold the device away from your body and the object being measured to avoid interference from your own electromagnetic field.
- Environmental Awareness: Use the device to identify potential sources of high EMF radiation in your home or workplace, such as near power lines, Wi-Fi routers, microwaves, and other electronic appliances.
- Consistent Measurement: When comparing readings, try to measure from the same distance and angle to ensure consistency.
- Understanding Readings: Refer to the radiation area comparison table (Figure 7) to understand if detected levels are considered safe, cautionary, or harmful.



10. Warranty and Support
The Mestek EMF01 Electromagnetic Radiation Tester comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty claims, or any questions regarding your device, please contact the seller or manufacturer directly through their official channels. Refer to the product packaging or seller's website for contact information.