1. Introduction
Welcome to the realme Buds Wireless 5 ANC Headphone user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new wireless earbuds. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Package Contents
- realme Buds Wireless 5 ANC Headphones x 1
- Quick Start Guide x 1
- Eartips x 6 (M size pre-installed)

2. Safety Information
- Do not expose the headphones to extreme temperatures or direct sunlight.
- Avoid using the headphones at excessively high volumes for prolonged periods to prevent hearing damage.
- Keep the device dry. The IP55 rating provides resistance to dust and water splashes, but it is not designed for submersion.
- Do not attempt to disassemble or modify the headphones. This will void the warranty and may cause damage.
- Keep out of reach of children and pets.
3. Initial Setup
3.1 Charging the Headphones
Before first use, fully charge your realme Buds Wireless 5 ANC. A 10-minute charge can provide up to 20 hours of playback (at 50% volume in normal mode), and a full charge takes approximately 1 hour.
3.2 Powering On/Off
- Power On: Press and hold the multi-function button until the indicator light turns on.
- Power Off: Press and hold the multi-function button until the indicator light turns off.
3.3 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the multi-function button for approximately 5 seconds until the indicator light flashes rapidly, indicating pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "realme Buds Wireless 5 ANC" from the list of devices.
- Once connected, the indicator light will stop flashing.
3.4 Wearing the Headphones
Select the appropriate size eartips for a comfortable and secure fit. The correct eartip size is crucial for optimal sound quality and noise cancellation performance. Insert the earbuds gently into your ears and adjust the neckband for comfort.

4. Operation
4.1 Control Buttons
The realme Buds Wireless 5 ANC feature intuitive controls located on the neckband. Specific functions may vary, but typically include:
- Multi-function Button: Power on/off, play/pause music, answer/end calls.
- ANC Button: Toggle between Noise Cancellation modes (ANC On, Transparency Mode, ANC Off).
4.2 Noise Cancellation Modes
The headphones offer 50dB Hybrid Noise Cancellation and Adaptive Three-level Noise Reduction to provide an immersive audio experience. Use the ANC button to cycle through the available modes:
- ANC On: Reduces ambient noise for focused listening.
- Transparency Mode: Allows you to hear your surroundings while still enjoying your audio.
- ANC Off: Standard audio playback without noise cancellation.


4.3 Call Functions
The headphones feature ENC Call Noise Cancellation, which uses a DNN algorithm to capture and clarify your voice, ensuring high-quality calls even in noisy environments.
- Answer/End Call: Press the multi-function button once.
- Reject Call: Press and hold the multi-function button.

4.4 Dual-device Connection
The realme Buds Wireless 5 ANC supports simultaneous connection to two devices, allowing seamless switching between them without needing to re-pair.

4.5 realme Link App Customization
For personalized audio settings and firmware updates, download the realme Link app. This app allows you to customize your sound preferences, including Dynamic Audio and EQ modes.

5. Key Features
- 50dB Hybrid Noise Cancellation: Advanced noise reduction for immersive listening.
- Adaptive Three-level Noise Reduction: Automatically adjusts ANC based on your environment.
- ENC Call Noise Cancellation: Ensures clear voice calls in noisy surroundings.
- 13.6mm Dynamic Bass Driver: Delivers rich bass and clear audio with a titanized diaphragm.

- Up to 38 Hours of Playback: Extended battery life for prolonged use (ANC off).

- Fast Charge: 10 minutes of charging provides 20 hours of playback.

- 45ms Ultra-low Latency: Optimized for gaming with minimal audio delay.

- Dual-device Connection: Seamlessly switch between two paired devices.
- IP55 Dust & Water Resistance: Protection against dust and water splashes, suitable for workouts and outdoor use.

- Dynamic Audio & 360° Spatial Audio Effect: Customizable sound profiles and immersive spatial audio.

6. Maintenance
6.1 Cleaning
- Regularly clean the eartips and earbud mesh with a soft, dry, lint-free cloth to remove earwax and debris.
- Do not use harsh chemicals or abrasive materials for cleaning.
- Ensure the charging port is free of dust and moisture.
6.2 Storage
- When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the headphones.
6.3 Battery Care
- To prolong battery life, avoid fully discharging the headphones frequently.
- Charge the headphones regularly, even if not in use for extended periods.
7. Troubleshooting
7.1 No Power
- Ensure the headphones are charged. Connect them to a power source and check the charging indicator.
- If the headphones do not respond, try a hard reset (refer to the Quick Start Guide for specific instructions if available).
7.2 Cannot Pair with Device
- Make sure the headphones are in pairing mode (indicator light flashing rapidly).
- Ensure Bluetooth is enabled on your device and it is within 10 meters of the headphones.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Restart both your device and the headphones.
7.3 Poor Sound Quality
- Check the connection range; move closer to your paired device.
- Ensure the eartips are properly seated and form a good seal in your ears.
- Clean the earbud mesh to remove any obstructions.
- Try adjusting the audio settings via the realme Link app.
7.4 Noise Cancellation Not Working Effectively
- Ensure ANC mode is activated using the ANC button.
- Verify that the eartips provide a tight seal in your ear canal.
- Update the headphone firmware via the realme Link app if available.
7.5 Water Damage
While the headphones are IP55 rated for dust and water splash resistance, they are not waterproof. Avoid submerging them in water or exposing them to high-pressure water jets. If they get wet, wipe them dry immediately before charging or further use.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | realme Buds Wireless 5 ANC |
| Colors | Midnight Black, Twilight Purple, Dawn Silver |
| Sound Driver | 13.6mm Dynamic Bass Driver |
| Bluetooth Version | 5.4 |
| Wireless Range | ≤10m |
| Audio Codecs | SBC/AAC |
| Noise Cancellation | 50dB Hybrid ANC, Adaptive Three-level Noise Reduction, ENC Call Noise Cancellation |
| Battery Life (Playback) | Up to 38 hours (ANC off), 20 hours (ANC on) |
| Battery Life (Call) | 20 hours (Normal mode), 16 hours (ANC/Transparent mode) |
| Charging Time | 10 mins for 20 hrs playback, 1 hour for full charge |
| Water Resistance | IP55 |
| Latency | 45ms (Ultra-low) |
| Material | Plastic |
| Additional Features | With Microphone, Active Noise-Cancellation, Dual-device Connection, Dynamic Audio, 360° Spatial Audio Effect, realme Link App support |
Product Color Variants


9. User Tips
- App Customization: Download the realme Link app to unlock full customization options for audio profiles, EQ settings, and firmware updates.
- Optimal Fit: Experiment with the included eartip sizes to find the best fit for your ears. A proper seal significantly enhances sound quality and noise cancellation.
- Regular Cleaning: Keep your earbuds clean, especially the eartips and mesh, to maintain hygiene and prevent sound degradation.
- Authenticity: Ensure product authenticity by purchasing from official realme channels or authorized retailers.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official realme website or contact realme customer service directly. Keep your proof of purchase for warranty claims.