1. Product Overview
The Realme Techlife Studio H1 are advanced Bluetooth headphones designed for an immersive audio experience. They feature Hybrid Active Noise Cancellation, Hi-Res Audio support with LDAC codec, and a long-lasting battery. This manual provides essential information for using your headphones effectively.


2. Package Contents
Please check the box for the following items:
- Realme Techlife Studio H1 Headphones
- User Manual (this document)
- Charging Cable (Type-C)
3. Setup
3.1 Charging the Headphones
Before first use, fully charge your headphones. Connect the provided Type-C charging cable to the charging port on the headphones and to a compatible USB power source. A full charge takes approximately 1.5 hours.
3.2 Powering On/Off
- Power On: Press and hold the Power button until the indicator light turns on.
- Power Off: Press and hold the Power button until the indicator light turns off.
3.3 Bluetooth Pairing
The Realme Techlife Studio H1 headphones utilize Bluetooth 5.4 for stable and efficient wireless connections up to 10 meters (without obstruction).
- Ensure the headphones are powered off.
- Press and hold the Power button until the indicator light flashes rapidly, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Realme Techlife Studio H1" from the list of devices.
- Once connected, the indicator light will stop flashing and remain solid.
Google Fast Pair
For Android devices, the headphones support Google Fast Pair. In the boot state, if the headphones are close to a Google Phone, the Bluetooth indicator light (white light) will flash quickly, and the phone will display a pop-up window to initiate pairing. Confirm the connection on your phone.

3.4 Dual Device Connection
The headphones support connecting to two devices simultaneously, allowing seamless switching between them without re-pairing.

4. Operating Instructions
4.1 Key Operations
Refer to the diagram below for detailed button functions:

| Function Group | Action | Button Press |
|---|---|---|
| ANC Controls | Awareness/ANC on/ANC off | Short press one time |
| Game mode/Music mode | Press and hold for 1s | |
| LDAC on/off | Short press three times | |
| Spatial Audio Effect on/off | Short press two times | |
| Adaptive noise mode on/off | Press for 1s (using ANC + button) | |
| Call/Playback Controls | Play/Pause | Short press |
| Activate voice assistant | Short press twice | |
| Answer/End a call | Short press | |
| Decline a call | Press and hold for 1s | |
| Enter pairing mode | Short press three times | |
| Volume/Track Controls | Volume up | Short press (+) |
| Next track | Press and hold for 2s (+) | |
| Volume down | Short press (-) | |
| Previous track | Press and hold for 2s (-) |
4.2 Active Noise Cancellation (ANC)
The headphones feature 43dB Hybrid Active Noise Cancellation with intelligent recognition of environmental noise, adapting to various scenarios:
- Deep: Ideal for commuting or travel (e.g., subway).
- Moderate: Suitable for leisure and entertainment (e.g., outdoors).
- Mild: Best for work or study environments (e.g., office).
Use the ANC control button as described in the Key Operations section to cycle through modes or activate adaptive noise cancellation.

4.3 Spatial Audio Effect
Experience an immersive 360° Spatial Audio Effect that creates a cinema-grade soundstage. This feature can be toggled on/off using the designated button press (short press two times).
Note: Spatial audio effect is not supported in wired mode.

4.4 Call Noise Cancellation (ENC)
The headphones incorporate an ENC (Environmental Noise Cancellation) algorithm to ensure clear calls by reducing background noise.

4.5 Low Latency Mode
The headphones offer an 80ms ultra-low latency mode, ideal for gaming, to ensure audio and visuals are perfectly synchronized.
Note: Game mode is not supported in LDAC mode.

5. Maintenance
5.1 Cleaning
- Wipe the headphones with a soft, dry, lint-free cloth.
- For the ear cushions and headband, which are made of skin-friendly vegan leather and memory foam, use a slightly damp cloth with mild soap if necessary, then wipe dry immediately.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Avoid getting moisture into any openings.
5.2 Storage
- Store the headphones in a cool, dry place away from extreme temperatures and direct sunlight.
- When not in use, it is recommended to store them in a protective case to prevent damage.
- The headphones feature a collapsible metal shaft for easier storage.

6. Troubleshooting
If you encounter issues with your Realme Techlife Studio H1 headphones, try the following solutions:
- Headphones won't power on: Ensure the headphones are fully charged.
- Cannot pair with device:
- Make sure the headphones are in pairing mode (indicator light flashing rapidly).
- Ensure Bluetooth is enabled on your device and it's within 10 meters of the headphones.
- Forget the device from your phone's Bluetooth settings and try pairing again.
- Restart both the headphones and your device.
- No sound or poor sound quality:
- Check the volume levels on both the headphones and your connected device.
- Ensure the headphones are properly connected via Bluetooth.
- Try playing audio from a different source or application.
- If using LDAC, ensure your device supports it and it's enabled. Note that Game mode is not supported in LDAC mode.
- Active Noise Cancellation (ANC) not working effectively:
- Ensure ANC is activated (short press one time on the ANC button).
- Check that the ear cushions form a good seal around your ears. Adjust the headphones for a better fit.
- Ensure no obstructions are blocking the ANC microphones.
- Dual device connection issues:
- Ensure both devices are within Bluetooth range and have active Bluetooth connections.
- Try disconnecting and reconnecting from one of the devices.
- Buttons not responding: Restart the headphones. If the issue persists, ensure the headphones are charged.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | Realme Techlife Studio H1 |
| Colors | Black, White, Red |
| Noise Reduction Depth | 43dB Hybrid Active Noise Cancellation |
| Battery Capacity | 600mAh 3.7V (2.22Wh) |
| Charging Port | Type-C |
| Audio Codecs | AAC/SBC/LDAC |
| Bluetooth Version | 5.4 |
| Bluetooth Profiles | HFP/AVRCP/A2DP/BLE/SPP |
| Transmission Distance | 10m Max (no blocking) |
| Operating Time | About 70 hours (ANC OFF) |
| Charging Time | About 1.5 hours |
| Driver Size | 40mm Giant PET diaphragm |
| Material | Plastic, Vegan Leather, Memory Cushion |
| Features | With microphone, Active Noise Cancelling, Volume Control, Hi-Res Audio, LDAC, Spatial Audio Effect, Dual Device Connection, 80ms Ultra-low Latency, Google Fast Pair |
| Vocalism Principle | Dynamic |
| Style | Wireless headphone & headset |
| Origin | Mainland China |
| Package List | User Manual, Charging Cable |

8. User Tips
- Optimize ANC: For the best Active Noise Cancellation experience, ensure the earcups fully seal around your ears. Adjust the headband for a snug but comfortable fit.
- Battery Life Extension: While the headphones offer up to 70 hours of playback with ANC off, turning off ANC when not needed can further extend battery life.
- Quick Charge Benefit: If you're in a hurry, a 10-minute charge can provide several hours of listening time, making it convenient for short bursts of use.
- LDAC for Quality: To enjoy the highest audio fidelity, ensure your source device supports the LDAC codec and that it is enabled on both the device and the headphones. Remember, Game mode is not available when LDAC is active.
- Dual Device Convenience: Take advantage of the dual device connection feature to seamlessly switch between your phone for calls and your computer for music or videos without re-pairing.
9. Warranty and Support
Your Realme Techlife Studio H1 headphones are guaranteed to be original and new. For any product quality issues, please contact the seller with photos or videos demonstrating the problem. They will provide support in a timely manner.
Please note that buyers are responsible for shipping costs if goods need to be returned to the seller.