1. Introduction
The NETUM Z2 (Model ZSS-2) is a versatile 1D and 2D barcode scanner designed for various applications, including POS systems. It offers multiple connection modes, a professional CMOS sensor for efficient scanning, and a large storage capacity for offline use. This manual provides detailed instructions for setting up, operating, and maintaining your scanner.
Figure 1: NETUM Z2 Bluetooth 1D&2D Mini Scanner Overview
2. Key Features
- 3-in-1 Connection Modes: Supports Bluetooth, 2.4GHz wireless (via mini USB receiver), and USB cable connection for flexible use.
- Dual Working Modes: Instant upload mode for real-time data transmission and storage mode with 16MB built-in flash memory, capable of storing over 50,000 barcodes for offline scanning.
- Long-lasting Battery: Equipped with a 1200mAh Li-Ion battery, providing up to 100,000 continuous scans on a full charge.
- Professional CMOS Sensor: Capable of reading both 1D and 2D barcodes from paper and digital screens (e.g., mobile phones).
- Extensive Symbology Support:
- 1D Barcodes: Code 11, Code 93, MSI, Code 128, UCC/EAN-128, Code 39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 25, Interleaved 25, Standard 25, 2/5 Matrix.
- 2D Barcodes: PDF417, Micro PDF417, Data Matrix, QR Code, Micro QR, Aztec, MaxiCode.
- Wide Compatibility: Works with Windows, MAC OS, Android, and iOS systems, and is compatible with common software like Quickbook, Word, Excel, and Novell.
- Compact and Lightweight Design: Mini size (105mm x 42mm x 25mm) and lightweight (66g) for easy portability.
- Super Long Transmission Range:
- 2.4G Wireless Mode: Max 100m (330ft) in barrier-free environments, 30m (99ft) with barriers.
- Bluetooth Mode: Max 50m (164ft) in barrier-free environments, 20m (66ft) with barriers.
Figure 2: Connectivity and Compatibility Features
Figure 3: Transmission Range Capabilities
Figure 4: Mini Size and Lightweight Design
3. Setup Instructions
3.1 Initial Charging
Before first use, fully charge the scanner using the provided USB cable. Connect the cable to the scanner's USB port and a power source (e.g., computer USB port, USB wall adapter). The indicator light will show charging status.
3.2 Connection Modes
The NETUM Z2 scanner supports three connection methods:
-
USB Wired Mode
Connect the scanner directly to your computer using the USB cable. The scanner will be recognized as a keyboard device, and scanned data will be input directly into any active text field.
-
2.4GHz Wireless Mode
Plug the mini USB receiver into an available USB port on your computer. The scanner will automatically pair with the receiver. Scanned data will be transmitted wirelessly to your computer.
-
Bluetooth Mode
To connect via Bluetooth, ensure your device (computer, tablet, smartphone) has Bluetooth enabled. Turn on the scanner and activate its Bluetooth pairing mode (refer to the full user manual for specific barcode commands if needed). Search for the scanner in your device's Bluetooth settings and pair. Once connected, scanned data will be sent wirelessly.
Figure 5: Connection Mode Options
4. Operating Instructions
4.1 Basic Scanning
Point the scanner at the barcode you wish to read and press the trigger button. A successful scan is typically indicated by a beep and/or a green light. The data will be transmitted according to your selected connection mode.
Figure 6: Scanning a 2D Barcode from a Screen
4.2 Working Modes
- Normal Mode (Instant Upload): Scanned data is immediately transmitted to the connected device. This is the default mode.
- Storage Mode: Scanned data is stored in the scanner's internal memory. This is useful when out of range of the connected device. To upload stored data, scan the 'Manual data upload' barcode (found in the full user manual).
Figure 7: Large Capacity Storage for Offline Scanning
4.3 Scan Modes
The scanner can operate in different scan modes:
- Key Trigger Mode: Scan only when the trigger button is pressed.
- Continuous Mode: The scanner continuously scans without needing to press the trigger.
- Auto Sensing Mode: The scanner automatically detects a barcode in its field of view and scans it.
These modes can be configured by scanning specific programming barcodes found in the detailed user manual (PDF).
4.4 Keyboard Settings and Language
The scanner is factory programmed for the most common terminal and communications settings. To change keyboard language or other settings, refer to the 'Keyboard Settings' and 'Keyboard Language' sections in the full user manual and scan the appropriate configuration barcodes.
4.5 Data Editing (Prefix, Suffix, Output Format)
You can configure the scanner to add prefixes or suffixes to scanned data, or change the output format. These advanced settings are controlled by scanning specific barcodes detailed in the 'Data Editing', 'Output Format', and 'Prefix/Suffix' sections of the full user manual.
5. Maintenance
5.1 Cleaning the Scanner
To ensure optimal performance, keep the scanner's scanning window clean. Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution. Avoid abrasive materials or harsh chemicals that could scratch the window.
5.2 Battery Care
- Avoid fully discharging the battery frequently.
- Store the scanner in a cool, dry place when not in use for extended periods.
- Do not expose the scanner to extreme temperatures.
6. Troubleshooting
Below are common issues and their potential solutions. For more detailed troubleshooting, refer to the comprehensive user manual (PDF).
- Question 1: The scan is successful, the buzzer sounds once, but no data is uploaded?
- This could be due to a lost connection. Re-establish the connection (Bluetooth, 2.4GHz, or USB). If in storage mode, ensure you scan the 'Manual data upload' barcode to send data to the connected device.
- Question 2: The scanner scans successfully, beeps twice, and can upload data normally. What is going on?
- This behavior is normal for some configurations, indicating a successful scan and data transmission. If it's unexpected, check your scanner's settings for 'Buzzer Settings' or 'Scan Confirmation' in the full manual.
- Question 3: The scanner scans successfully, beeps three times, and fails to upload data. How can I solve this problem?
- Three beeps often indicate an error or a specific setting. Check the connection status. If in storage mode, ensure the memory is not full. Refer to the 'Error Codes' or 'Troubleshooting' section in the full manual for specific beep patterns.
- Question 4: The scanner beeps five times when a button is pressed. How can I solve this problem?
- Five beeps might indicate a low battery warning or a configuration error. Check the battery level. If the battery is sufficient, consult the full manual for specific error indications related to five beeps.
- Question 5: Scan successful, uploaded data incorrect?
- This usually points to incorrect keyboard language settings or output format settings. Ensure the scanner's keyboard language matches your computer's keyboard layout. Also, check 'Data Editing' settings for any unwanted prefixes, suffixes, or format changes.
- Important Note on Barcode Decoding:
- Some barcode types (e.g., Maxi Code, Interleaved 2 of 5) may be disabled by default. If the scanner cannot read a specific barcode, you may need to enable its symbology by scanning a programming barcode from the full user manual. The scanner is factory programmed for the most common settings; any changes require scanning specific configuration barcodes found in the guide. An asterisk (*) next to an option in the full manual indicates the default setting.
7. Specifications
| Feature | Specification |
|---|---|
| Product Type | Bar Code Scanner |
| Model Number | ZSS-2 |
| Brand Name | NETUM |
| Scanning Light Source | Natural Light + LED |
| Scan Element Type | CMOS |
| Optical Resolution | 600*600 |
| Scan Speed | 100 scans/second |
| Colour Depth | 32 Bit |
| Interface Type | USB |
| Signal Connection Type | Bluetooth, 2.4GHz Wireless, USB Wired |
| Scan Breadth | A4 (Implies wide scanning capability) |
| Battery Capacity | 1200mAh Li-Ion |
| Internal Memory | 16MB (stores >50,000 barcodes) |
| Dimensions (L x W x H) | 105mm x 42mm x 25mm |
| Weight | 66g |
| Certification | CE, FCC |
| Origin | Mainland China |
8. User Tips
- For optimal scanning of 2D codes on screens, ensure the screen brightness is adequate and avoid glare.
- If experiencing connectivity issues, try restarting both the scanner and the host device.
- Regularly check the battery level to avoid interruptions during critical scanning tasks.
- Keep the scanning window clean to maintain high read accuracy.
9. Warranty and Support
For detailed warranty information, technical support, or to access the complete list of programming barcodes and advanced settings, please refer to the official user manual PDF:
Download Full User Manual (PDF)
This PDF contains comprehensive instructions for all system settings, symbology configurations, and advanced features.