Midea KFR-35W/BP3N1

Contents

Midea Air Conditioning Control Panel KFR-35W/BP3N1 Instruction Manual

Model: KFR-35W/BP3N1

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Midea Air Conditioning Control Panel, model KFR-35W/BP3N1. This control panel is designed for home air conditioning units, ensuring efficient and reliable performance. Please read this manual thoroughly before attempting any installation or repair to ensure proper function and safety.

Video: Overview of the Midea Air Conditioning Control Panel.

2. Safety Information

Always observe the following safety precautions to prevent electric shock, injury, or damage to the product:

  • Ensure the power supply to the air conditioning unit is completely disconnected before installation or maintenance.
  • Only qualified personnel should perform installation and repair work.
  • Wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses.
  • Do not touch live electrical components.
  • Verify all connections are secure and correctly matched before restoring power.
  • This product is not electric and does not contain high-concerned chemicals, but proper handling of associated electrical components is crucial.

3. Product Overview

The Midea Air Conditioning Control Panel KFR-35W/BP3N1 is a universal model designed for various Midea air conditioning units. It serves as the central processing unit for controlling the air conditioner's functions.

Midea Air Conditioning Control Panel KFR-35W/BP3N1

Figure 1: Main Control Panel Overview.

Top-down view of the control panel

Figure 2: Top-down view of the control panel, showing main components.

Close-up of integrated circuits and resistors

Figure 3: Close-up of integrated circuits and resistors on the control panel.

Close-up of various connectors and inductors

Figure 4: Close-up of various connectors and inductors on the control panel.

Detailed view of the model number and manufacturing date

Figure 5: Detailed view of the model number KFR-35W/BP3N-(RX24Tmini+STR6A161+GIB10CH60TS-L+TPD4204F).D.13.WP2-1 and manufacturing date [1.9] 2022-03-16.

4. Installation and Setup

  1. Power Disconnection: Before beginning, ensure the main power supply to the air conditioning unit is completely turned off and disconnected.
  2. Access the Old Control Panel: Carefully open the air conditioning unit to access the existing control panel. Refer to your air conditioner's specific service manual for instructions on how to safely open the unit.
  3. Disconnect Old Panel: Document or photograph all existing connections to the old control panel. Carefully disconnect all wires and connectors from the old board. Pay close attention to the type and number of pins on each connector, especially critical ones like CN31/PMV.
  4. Remove Old Panel: Unscrew and remove the old control panel from its mounting.
  5. Install New Panel: Position the new Midea KFR-35W/BP3N1 control panel in the same location. Secure it with screws.
  6. Connect Wires: Reconnect all wires and connectors to the new control panel, ensuring each connection matches the documentation from step 3. Verify that all connectors, including any with specific pin counts (e.g., 6-pin connectors), are correctly adapted and securely seated.
  7. Close Unit: Carefully close the air conditioning unit, ensuring no wires are pinched.
  8. Restore Power: Reconnect the main power supply to the air conditioning unit.
  9. Test Functionality: Turn on the air conditioner and test all functions to ensure the new control panel is operating correctly.

5. Operation

Once installed, the control panel operates in conjunction with your air conditioner's existing user interface (e.g., remote control, wall-mounted thermostat). The panel processes commands and manages the various components of the air conditioning system, such as the compressor, fan, and temperature sensors.

  • Power On/Off: Use your air conditioner's standard power button or remote control to turn the unit on or off.
  • Mode Selection: Select desired operating modes (e.g., Cool, Heat, Fan, Dry, Auto) via the user interface.
  • Temperature Adjustment: Adjust the target temperature using the up/down buttons on your remote or thermostat.
  • Fan Speed: Change fan speed settings as needed.
  • Timer Functions: Utilize any timer or scheduling features available on your air conditioning unit.

6. Maintenance

The control panel itself requires minimal maintenance. However, regular maintenance of the overall air conditioning unit is recommended to ensure the longevity and optimal performance of all components, including the control panel.

  • Dust Removal: Periodically, with the power disconnected, gently clean any dust accumulation on the control panel using a soft, dry brush or compressed air.
  • Connection Check: During routine air conditioner maintenance, inspect the connections to the control panel for any signs of looseness or corrosion.
  • Avoid Moisture: Ensure the control panel area remains dry to prevent damage from moisture.

7. Troubleshooting

If your air conditioning unit is not functioning correctly after installing the new control panel, consider the following common issues:

  • No Power:
    • Check if the main power supply to the air conditioner is connected and switched on.
    • Verify all power cables to the control panel are securely connected.
  • Incorrect Functionality:
    • Ensure all connectors are correctly seated and matched according to your documentation. A mismatch in connector types (e.g., a 6-pin connector on CN31/PMV) can lead to incorrect operation.
    • Double-check that the specific model of the replacement board matches your air conditioner's requirements.
  • Error Codes:
    • Refer to your air conditioner's user manual for specific error code interpretations and solutions.
  • Intermittent Operation:
    • Inspect for any loose connections or signs of damage on the board or wiring.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified technician.

8. Specifications

Attribute Detail
Model Number KFR-35W/BP3N1 (Universal model)
Type Air Conditioner Parts (damper)
Application Home
Certification CE
Electric No
High-concerned chemical None
Origin Mainland China

Package Dimensions

Measurement Value
Length 25 cm
Width 15 cm
Height 10 cm
Weight 1.9 kg

9. User Tips

  • Verify Connections Carefully: Before installation, meticulously compare the connectors on the new board with your old one. Even if the new board appears more compact, ensure all connection points (e.g., CN31/PMV) match your air conditioner's requirements. Taking photos of the old connections can be very helpful.
  • Confirm Model Compatibility: Always double-check that the specific model number of the replacement board (e.g., KFR-35W/BP3N1) is compatible with your air conditioning unit. Variations in the extended model string (e.g., KFR-35W/BP3N-(RX24Tmini+TNY288+6MBP15XSF+4134).D.13.WP2-1) can indicate different component configurations.
  • Consider Professional Installation: If you are unsure about the installation process or identifying correct connections, it is advisable to seek assistance from a professional technician.
  • Packaging: The product is typically well-packaged to prevent damage during transit. Inspect the board for any visible damage upon arrival.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.