1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Estardyn 2.0 Inch 240x320 Full Color TFT LCD Display Module. Designed for hobbyists and professionals, this module features an ST7789 controller and supports both SPI and 8-bit parallel interfaces, making it ideal for integration with microcontrollers such as Arduino.
2. Features
- Display Size: 2.0 inches
- Resolution: 240x320 pixels (Full Color RGB)
- Controller IC: ST7789
- Interface: 4-wire SPI (default) / 8-bit 8080 Parallel
- Color Depth: 262K colors
- Display Mode: Normal Black
- Input Voltage (VDD): 3V - 5V
- Backlight: 3 white LEDs (If = 60mA, VF = 3.2V)
- Viewing Angle: Full view angle
- Operating Temperature: -20°C to 70°C
- Storage Temperature: -30°C to 80°C
3. Package Contents
Please check the package for the following items:
- 1 x Estardyn 2.0 Inch TFT LCD Display Module
- 1 x Pin Header (typically 8-pin, unassembled)
Note: The pin header may require soldering to the module for connection.
4. Specifications
4.1. General Specifications
| Attribute | Value |
|---|---|
| Brand Name | Estardyn |
| Model Number | 2.0 inch TFT SPI LCD |
| Type | TFT |
| Resolution | 240x320 |
| Display Mode | Normal Black |
| Color | Full color 262K |
| LCM Input Voltage (VDD) | 3V - 5V |
| Backlight | 3 white LEDs (If = 60mA, VF = 3.2V) |
| Operating Temperature | -20°C to 70°C |
| Storage Temperature | -30°C to 80°C |
| Connection Method / Driver IC | COG / ST7789 22P pitch 0.5mm socket |
| Interface | 4-SPI (default) / 8b-8080 |
| Viewing Angle | Full view angle |
| Origin | Mainland China |
4.2. Mechanical Specifications
- Module Dimensions (L*W*T): 58.04mm * 37.5mm * 6.5mm (Max)
- Effective Area (A/A): 30.6mm (L) * 40.8mm

5. Setup Instructions
This section details how to connect your TFT LCD module to a microcontroller, focusing on the default 4-wire SPI interface.
5.1. Pinout Diagram
Refer to the pinout table below and Figure 1 for pin identification:
| NO. | Symbol | Description |
|---|---|---|
| 1 | GND | Ground |
| 2 | VDD | Power Supply (3V-5V) |
| 3 | SCL | SPI Clock Line |
| 4 | SDA | SPI Data Line (MOSI) |
| 5 | RES | Reset Pin |
| 6 | DC | Data/Command Select Pin |
| 7 | CS | Chip Select Pin |
| 8 | BL | Backlight Control Pin (usually connected to VDD for always-on) |
5.2. Wiring (SPI Mode)
Connect the LCD module to your microcontroller (e.g., Arduino) as follows:
- GND to Microcontroller GND
- VDD to Microcontroller 3.3V or 5V (ensure compatibility)
- SCL to Microcontroller SPI Clock (e.g., D13 on Arduino Uno)
- SDA to Microcontroller SPI MOSI (e.g., D11 on Arduino Uno)
- RES to any digital pin on Microcontroller (e.g., D9)
- DC to any digital pin on Microcontroller (e.g., D8)
- CS to any digital pin on Microcontroller (e.g., D10)
- BL to Microcontroller 3.3V or 5V (or a digital pin for PWM brightness control)
Note: Specific pin assignments may vary depending on your microcontroller board. Consult your board's documentation.


5.3. Software Setup
To use the display, you will need a compatible library for your microcontroller. For Arduino, popular libraries include:
- Adafruit GFX Library
- Adafruit ST7735/ST7789 Library
Install these libraries via the Arduino IDE's Library Manager. Refer to the library examples for basic initialization and drawing functions.
6. Operating Instructions
Once connected and the necessary libraries are installed, you can begin programming your display.
6.1. Initialization
In your code, initialize the display object with the correct pins you've connected:
#include <Adafruit_GFX.h>
#include <Adafruit_ST7789.h>
#include <SPI.h>
#define TFT_CS 10
#define TFT_DC 8
#define TFT_RES 9
Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_RES);
void setup() {
tft.init(240, 320); // Initialize ST7789 screen, 240x320
tft.setRotation(0); // Set display rotation (0-3)
tft.fillScreen(ST77XX_BLACK); // Fill screen with black
}
void loop() {
// Your display code here
}6.2. Displaying Graphics and Text
Use the library functions to draw shapes, text, and images:
tft.fillScreen(color);: Fills the entire screen with a specified color.tft.drawPixel(x, y, color);: Draws a single pixel.tft.drawLine(x0, y0, x1, y1, color);: Draws a line.tft.drawRect(x, y, w, h, color);: Draws a rectangle outline.tft.fillRect(x, y, w, h, color);: Draws a filled rectangle.tft.setTextColor(color);: Sets text color.tft.setTextSize(size);: Sets text size.tft.setCursor(x, y);: Sets text cursor position.tft.print("Hello World!");: Prints text to the display.
Consult the Adafruit GFX and ST7789 library documentation for a complete list of functions and examples.
7. Maintenance
To ensure the longevity and optimal performance of your TFT LCD module, follow these maintenance guidelines:
- Cleaning: Gently wipe the display surface with a soft, lint-free cloth. For stubborn smudges, use a small amount of isopropyl alcohol on the cloth. Avoid abrasive cleaners or direct spraying of liquids onto the module.
- Handling: Always handle the module by its edges. Avoid touching the display surface or the exposed FPC (Flexible Printed Circuit) connector on the back.
- Storage: Store the module in a dry, anti-static environment within the specified storage temperature range (-30°C to 80°C). Keep it away from direct sunlight and extreme humidity.
- Power: Ensure the input voltage (VDD) is within the 3V-5V range. Over-voltage can damage the module.
8. Troubleshooting
If you encounter issues with your TFT LCD module, try the following troubleshooting steps:
- No Display/Blank Screen:
- Check all wiring connections for looseness or incorrect pin assignments.
- Verify that the VDD and GND connections are correct and providing stable power.
- Ensure the backlight (BL) pin is correctly connected, typically to VDD for constant illumination.
- Confirm that the display initialization code in your sketch is correct and matches your connected pins.
- Try a simple example sketch from the library to rule out complex code issues.
- Incorrect Colors/Distorted Display:
- Double-check the SPI (SCL, SDA, CS, DC) connections. Incorrect wiring can lead to data corruption.
- Ensure the correct display driver (ST7789) is selected in your library initialization.
- Verify the resolution setting in your initialization code (
tft.init(240, 320);).
- Display Not Responding:
- Check the RES (Reset) pin connection. A faulty reset signal can prevent the display from starting.
- Ensure your microcontroller is powered on and running the code.
- Flickering Display:
- Check power supply stability. Insufficient current or voltage fluctuations can cause flickering.
- Ensure good quality jumper wires are used, especially for SPI lines.
9. User Tips
- Voltage Compatibility: While the module supports 3V-5V VDD, always check your microcontroller's logic level. If your microcontroller operates at 5V logic and the display is 3.3V tolerant, consider using a logic level shifter for data pins (SCL, SDA, RES, DC, CS) to prevent damage.
- Library Examples: Start with the basic examples provided by the Adafruit ST7789 library. These are excellent for verifying connections and understanding fundamental display operations.
- Backlight Control: For projects requiring adjustable brightness, connect the BL pin to a PWM-capable digital pin on your microcontroller and use
analogWrite()to control the backlight intensity. - Orientation: Experiment with
tft.setRotation(0-3);to find the optimal display orientation for your project.
10. Warranty and Support
Estardyn products are manufactured to high-quality standards. For technical assistance or support, please refer to the seller's contact information or the product page where you purchased the item. Keep your purchase records for any warranty claims.