MIYOTA 6M55

Contents

MIYOTA 6M55 Quartz Movement User Manual

Model: 6M55

Introduction

This manual provides instructions for the MIYOTA 6M55 three-pin ultra-thin quartz watch movement. The 6M55 is a reliable movement designed for watches requiring day and date complications. Please read these instructions carefully before installation and operation to ensure proper function and longevity of your watch movement.

Setup and Installation

The MIYOTA 6M55 is a precision watch component. Installation should ideally be performed by a qualified watchmaker or an individual with experience in watch repair to prevent damage.

  1. Preparation: Ensure your workspace is clean, dust-free, and well-lit. Use appropriate tools for handling delicate watch components.
  2. Movement Placement: Carefully place the 6M55 movement into the watch case, ensuring it sits securely.
  3. Crown Stem Installation: Insert the crown stem into the movement. Ensure it clicks into place. Do not force the stem.
  4. Dial and Hands Attachment: Attach the watch dial to the movement. Then, carefully press the hour, minute, and second hands onto their respective pinions. Ensure hands are parallel and do not touch each other or the dial.
  5. Case Closing: Once the dial and hands are installed, carefully close the watch case, ensuring the gasket is properly seated for water resistance (if applicable to your watch case).
Front view of MIYOTA 6M55 quartz movement with day and date wheels
Front view of the MIYOTA 6M55 quartz movement, showing the day and date wheels, and the crown stem. The day wheel displays days of the week (Monday-Sunday, with Sunday in red) and the date wheel shows numbers 1-31.

Operating Instructions

The MIYOTA 6M55 movement features a crown with multiple positions for setting the time and date.

  1. Setting the Time:
    • Pull the crown out to the second click position (farthest out).
    • Turn the crown to move the hands clockwise until the desired time is set.
    • Push the crown back to the normal position.
  2. Setting the Date:
    • Pull the crown out to the first click position.
    • Turn the crown clockwise to adjust the date.
    • Turn the crown counter-clockwise to adjust the day.
    • Once the desired date and day are set, push the crown back to the normal position.
    • Note: Avoid setting the date between 9 PM and 3 AM, as this can damage the movement's date change mechanism. If the time falls within this period, first advance the time past 3 AM, then set the date, and finally set the correct time.

Maintenance

Proper maintenance ensures the longevity and accuracy of your MIYOTA 6M55 movement.

  1. Battery Replacement:
    • The movement uses an SR621SW battery.
    • When the watch stops or the second hand skips, it's time to replace the battery.
    • Battery replacement should be done by a professional watchmaker to avoid damaging the movement or affecting water resistance.
    • Carefully open the watch case back.
    • Locate the battery and gently remove it using a non-metallic tool.
    • Insert a new SR621SW battery, ensuring correct polarity.
    • Close the watch case back securely.
  2. Cleaning:
    • Keep the movement free from dust and moisture.
    • If the movement requires cleaning, it should be done by a professional watchmaker using specialized tools and solutions.
Rear view of MIYOTA 6M55 quartz movement showing SR621SW battery
Rear view of the MIYOTA 6M55 quartz movement, showing the battery compartment with an SR621SW battery installed, and "MIYOTA CO. JAPAN" engraving.

Troubleshooting

If you encounter issues with your MIYOTA 6M55 movement, refer to the following common problems and solutions:

  • Watch not running:
    • Check if the crown is pushed in completely to the normal operating position.
    • The battery may be depleted. Replace the SR621SW battery (see Maintenance section).
  • Second hand gets stuck or stops intermittently:
    • This could indicate a defective movement or an obstruction. Ensure hands are not touching each other or the dial.
    • If the issue persists after checking for obstructions and replacing the battery, the movement may be faulty and require replacement.
  • Incorrect time/date:
    • Ensure the crown is fully pushed in after setting.
    • If the time or date consistently falls behind or advances too quickly, the movement may require servicing or replacement.

Specifications

Feature Specification
Brand Name MIYOTA (QZGY)
Model 6M55
Movement Type Quartz
Item Type Movement Accessories
Battery Included Yes (SR621SW)
Date Wheel Font Arabic
Date Wheel Colors White (also available in Yellow Calendar variant)
Origin Japan
High-concerned chemical None

Note: Specific dimensions (e.g., diameter, thickness) are crucial for compatibility with watch cases and are typically provided by the watch case manufacturer or detailed movement specifications. Please verify these details for your specific application.

User Tips

  • Dial Compatibility: The movement is sold as an accessory. Dials are typically purchased separately and must be compatible with the 6M55 movement's dimensions and hand post sizes.
  • Professional Installation: Given the delicate nature of watch movements, professional installation is highly recommended to avoid damage, especially when dealing with issues like a stuck seconds hand.
  • Handle with Care: Always handle the movement by its edges or using appropriate tools to prevent damage to the delicate components.

Warranty and Support

For warranty claims or technical support, please contact the original seller or authorized MIYOTA service center. Keep your proof of purchase for any warranty-related inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.