ISDT N8 N16 N24

Contents

ISDT N8 N16 N24 Smart Battery Charger Instruction Manual

Models: N8, N16, N24

Brand: ISDT

Introduction

The ISDT N8, N16, and N24 are advanced smart battery chargers designed for a wide range of rechargeable batteries, including Li-ion, LiHV, LiFe, NiMH, NiCd, and NiZn. These chargers feature a full-color LCD display, independent multi-channel quick charging, and various professional work modes to ensure efficient and safe battery management. This manual provides essential information for the proper setup, operation, and maintenance of your ISDT N-Series charger.

ISDT N8 smart battery charger, front view

ISDT N8 Smart Battery Charger

Key Features

  • Independent Multi-Channel Quick Charge: Each slot operates independently, providing up to 1500mA current output for rapid charging, achieving a 90-minute quick charge for compatible batteries.
  • Full Color LCD Touch Panel: A bright 2.4-inch high-resolution screen displays current job parameters, battery performance, and allows for intuitive navigation.
  • Wide Battery Type Compatibility: Supports Li-ion, LiHV, LiFe, NiMH, NiCd, and NiZn batteries. Features automatic battery type identification with intelligent charge algorithm matching. (Note: LiHV and NiZn battery types require manual selection during operation).
  • Professional Work Modes: Offers versatile modes including Charge, Cycle, Activation, and Discharge to cater to various battery maintenance needs.
Diagram illustrating various compatible battery types (Li-ion, LiHV, LiFe, NiMH, NiCd, NiZn)

Compatible Battery Types

Image showcasing the professional work modes: Charge, Cycle, Activation, Discharge

Professional Work Modes

Models and Specifications

The ISDT N-Series chargers are available in three models: N8, N16, and N24, differing primarily in the number of charging slots and power capabilities.

Table of product specifications for N8, N16, and N24 models

Product Specifications Overview

ISDT N-Series Charger Specifications
FeatureN8N16N24
Power InputMicro USBØ6.5 DC JackØ6.5 DC Jack
Input Voltage5-12V5-12V5-12V
Input Power18W36W48W
Charge Cells1-8 AA/AAA cells1-16 AA/AAA cells1-24 AA/AAA cells
Battery TypeLi-ion, LiHV, LiFe, Ni-MH, Ni-Cd, LiFePO4, Eneloop
Charge Current0.1A-1.5A/slot
Discharge Current0.1A-1.0A/slot
Display240×320 IPS LCD
Operating Temperature0°C-40°C
Size (LxWxH)188.5x79x28mm308.4x79x28mm428.2x79x28mm
Weight283g450g810g

Setup and Installation

  1. Power Connection:
    • For N8: Connect a Micro USB cable to the charger and a suitable power source (e.g., USB wall adapter, power bank).
    • For N16/N24: Connect the provided DC power adapter to the Ø6.5 DC jack on the charger and then to a wall outlet.
  2. Initial Power-On: Once connected to power, the LCD screen should light up, indicating the charger is ready for use.
  3. Battery Insertion: Carefully insert AA or AAA batteries into the charging slots, ensuring correct polarity (+ and - terminals match the markings on the charger).

Operating Instructions

Close-up of the charger's full-color LCD touch panel displaying charging parameters

LCD Touch Panel Interface

  1. Automatic Battery Detection: For most common battery types (Li-ion, NiMH, NiCd, LiFePO4, Eneloop), the charger will automatically detect the battery chemistry and begin charging with appropriate parameters.
  2. Manual Battery Type Selection: For LiHV and NiZn batteries, you must manually select the correct battery type using the touch panel interface after inserting the battery. Follow the on-screen prompts to confirm your selection.
  3. Monitoring Charging Progress: The full-color LCD displays real-time charging parameters for each slot, including:
    • Battery capacity (mAh) and percentage charged
    • Elapsed charging time
    • Voltage and current
    • Internal resistance
    • Temperature
  4. Selecting Work Modes: The charger offers several professional work modes accessible via the touch panel:
    • Charge: Standard charging mode.
    • Cycle: Performs charge and discharge cycles to refresh and condition batteries.
    • Activation: Designed to revive deeply discharged batteries.
    • Discharge: Discharges batteries to a user-defined voltage.
    Navigate through the modes using the touch screen and confirm your selection.
  5. Independent Slot Control: Each charging slot can be configured and monitored independently, allowing you to charge different battery types or sizes simultaneously.

Maintenance

  • Cleaning: Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents.
  • Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Disassembly: Do not attempt to disassemble or modify the charger. This will void the warranty and could lead to malfunction or injury.
  • Ventilation: Ensure adequate ventilation around the charger during operation to prevent overheating.

Troubleshooting

  • Charger Not Powering On:
    • Check if the power cable (Micro USB or DC adapter) is securely connected to both the charger and the power source.
    • Ensure the power source is active and providing sufficient voltage (5-12V).
  • Battery Not Detected/Charging:
    • Verify that the battery is inserted correctly with the correct polarity.
    • Ensure the battery is a supported type (Li-ion, LiHV, LiFe, NiMH, NiCd, NiZn).
    • If charging LiHV or NiZn, confirm that you have manually selected the correct battery type on the display.
    • The battery might be severely over-discharged; try the 'Activation' mode if available and safe for the battery type.
  • Charger Overheating:
    • Ensure the charger is placed in a well-ventilated area and not covered.
    • Check the ambient room temperature; avoid charging in excessively hot environments.
    • If overheating persists, discontinue use and contact support.
  • Error Messages on Display:
    • Refer to the specific error message displayed on the screen. Most errors indicate an issue with the battery, connection, or charging parameters.
    • Try removing and reinserting the battery, or restarting the charger.

User Tips

  • Verify Battery Type: Always double-check the battery type, especially for LiHV and NiZn, and manually select it on the charger if necessary to prevent damage.
  • Optimal Storage: For batteries not in use for extended periods, consider using the 'Discharge' mode to bring them to their recommended storage voltage, which can prolong battery life.
  • Regular Cycling: For NiMH/NiCd batteries, using the 'Cycle' mode periodically can help reduce memory effect and maintain capacity.
  • Monitor Temperature: While the charger monitors temperature, it's good practice to occasionally feel the batteries during charging. If they become excessively hot, stop charging immediately.

Warranty and Support

For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or the official ISDT support channels. Keep your proof of purchase for warranty validation.

© 2023 ISDT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.