1. Introduction
Thank you for choosing DNVYUAX Replacement Ear Pads. These premium memory foam ear pads are designed to upgrade your listening experience by providing superior noise isolation and long-lasting durability. Crafted from breathable sponge, they effectively reduce heat buildup, ensuring your ears remain cool and comfortable during extended use. These ear pads are specifically designed for Jabra 4h (Model: HSC140) headsets, enhancing both comfort and sound fidelity.
2. Package Contents
Your package should contain the following items:
- 1 pair of DNVYUAX Replacement Ear Pads (black)

Figure 2.1: Contents of the package - a pair of replacement ear pads.
3. Specifications
| Feature | Detail |
|---|---|
| Item Type | Ear Pads |
| Brand Name | DNVYUAX |
| Model Number | Earpads (for Jabra 4h HSC140) |
| Material | Leather (outer), Sponges (component) |
| Dimensions (approx.) | 50mm (1.97in) width x 65mm (2.56in) length |
| Package | Yes |

Figure 3.1: Approximate dimensions of a single ear pad.
4. Setup and Installation
Replacing your headphone ear pads is a straightforward process and requires no special tools. Follow the steps below or refer to the installation video for a visual guide.
4.1. Video Guide
Video 4.1: Step-by-step guide on how to install the replacement ear pads.
4.2. Step-by-Step Instructions
- Remove Old Ear Pads: Gently peel off the existing ear pads from your Jabra 4h (HSC140) headphones. They are usually held in place by a rim or adhesive. Take care not to damage the headphone speaker unit.
- Clean Headphone Surface (Optional): If there is any residue from the old ear pads, gently clean the surface of the headphone where the new pads will attach.
- Align New Ear Pads: Take one new DNVYUAX ear pad. Align its inner rim with the corresponding groove or attachment point on your headphone's speaker unit.
- Secure New Ear Pads: Carefully stretch and press the ear pad around the headphone's speaker unit, ensuring it is fully seated and securely attached. Work your way around the circumference until the pad is flush and firm.
- Repeat for Second Ear Pad: Follow the same steps for the other ear pad.

Figure 4.2: Inner and outer view of the replacement ear pads.

Figure 4.3: Jabra 4h (HSC140) headphones with DNVYUAX replacement ear pads successfully installed.
5. Operating Instructions
Once the DNVYUAX Replacement Ear Pads are installed, your Jabra 4h (HSC140) headphones are ready for use. The new ear pads are designed to provide enhanced comfort and improved sound isolation. Simply place your headphones on your head as usual. The breathable material will help keep your ears cool and dry, even during prolonged listening sessions.
6. Maintenance
To ensure the longevity and hygiene of your DNVYUAX Replacement Ear Pads, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the surface of the ear pads with a soft, slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the material.
- Drying: Allow the ear pads to air dry completely before using your headphones again. Do not expose them to direct sunlight or high heat.
- Storage: When not in use, store your headphones in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Avoid Punctures: Be careful not to puncture or tear the ear pad material with sharp objects.
7. Troubleshooting
If you encounter any issues with your replacement ear pads, please refer to the following common solutions:
- Ear Pads Don't Fit:
- Ensure your headphone model is Jabra 4h (HSC140). These ear pads are specifically designed for this model.
- Double-check the installation steps. Sometimes, the pads may not be fully seated in the headphone's groove.
- Reduced Sound Quality or Noise Isolation:
- Verify that both ear pads are securely and evenly installed on the headphone speakers. An improper seal can affect sound performance and noise cancellation.
- Ensure there are no gaps between the ear pads and your ears when wearing the headphones.
- Discomfort During Use:
- Allow a short break-in period for the memory foam to conform to your ears.
- Ensure the headphones are adjusted correctly on your head.
8. User Tips
Based on user feedback, these ear pads have shown excellent compatibility and performance:
- Broader Compatibility: While designed for Jabra 4h (HSC140), some users have reported that these ear pads are also perfectly compatible with Jabra Evolve 2 30 headphones, suggesting a potentially broader fit for similar Jabra models.
- Enhanced Comfort: The breathable sponge and memory foam construction are highly praised for maintaining comfort and preventing ear fatigue during long listening sessions, making them ideal for professional use or extended entertainment.
9. Warranty and Support
For any questions, concerns, or support regarding your DNVYUAX Replacement Ear Pads, please contact the seller or manufacturer directly. Please retain your proof of purchase for any warranty claims or support inquiries.