KAWA D11

Contents

KAWA Dash Cam D11 User Manual

Model: D11

Introduction

Thank you for choosing the KAWA Dash Cam D11. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it carefully before use to ensure optimal performance and safety.

Official product video showcasing features like night vision, 4K recording, GPS tracking, and app connectivity.

Package Contents

Please check the box for the following items:

  • Dash Cam (Front Camera)
  • Rear Camera
  • Holder
  • Car Charger
  • Power Cord
  • Crowbar
  • User Manual
  • Heat-resistant Adhesive Paper
  • TF Card (64GB included)
  • Electrostatic Sticker
  • Base Installation Slot
  • 3M Glue
  • Anti-static Film
Package Contents: Dash Cam, Rear Cam, Car Charger, Power Cord, Crowbar, User Manual, Base Installation Slot, 3M Glue, Anti-static Film, 64GB Micro SD Card

Image showing all items included in the KAWA D11 Dash Cam package.

Product Overview

Familiarize yourself with the components of your dash cam:

Diagram of KAWA D11 Dash Cam with numbered parts: Cooling hole, Base installation slot, Rear camera interface, Display, LED, Power button, Restart button, TFcard slot, Power interface, MIC, Function button, Speaker, Lens.

Diagram of the KAWA D11 Dash Cam highlighting its various parts.

  1. Cooling hole
  2. Base installation slot
  3. Rear camera interface
  4. Display
  5. LED
  6. Power button
  7. Restart button
  8. TFcard slot
  9. Power interface
  10. MIC
  11. Function button
  12. Speaker
  13. Lens

Installation

Front Camera Installation

  1. Insert TF card: Insert the TF card into the TF card slot. A TF card is included in the package.

    Inserting TF card into the dash cam

    Step 1: Inserting the TF card.

  2. Install the base: Install the base into the recorder slot and slide it upwards until you hear a "click" sound, indicating that the installation is complete.

    Installing the dash cam base

    Step 2: Installing the dash cam onto its base.

  3. Peel electrostatic sticker: Peel off the electrostatic sticker and choose a suitable place on your windshield to stick it. Ensure the area is clean and dry.

    Applying electrostatic sticker to windshield

    Step 3: Applying the electrostatic sticker to the windshield.

  4. Peel adhesive paper: Peel off the adhesive paper on the dash cam holder.

    Peeling adhesive paper from dash cam holder

    Step 4: Removing the adhesive backing from the holder.

  5. Stick dash cam: Stick the dash cam in the center of the electrostatic sticker and press it firmly to stabilize.

    Attaching dash cam to electrostatic sticker

    Step 5: Attaching the dash cam to the windshield via the sticker.

  6. Route power cord: The power cord can be routed according to the instructions in the image to keep it tidy and out of the way.

    Diagram for routing the power cord

    Step 6: Recommended power cord routing for a neat installation.

Rear Camera Installation

  1. Position the camera: For installation, position the rear camera on the vehicle's rear window as shown in the diagram below.

    Diagram showing rear camera placement on vehicle's rear window

    Diagram for optimal rear camera placement.

  2. Clean window and apply sticker: For better visibility, refer to the pictures below for the placement of the electrostatic sticker. Before installation, make sure to clean the window thoroughly.

    Correct and incorrect placement of rear camera electrostatic sticker

    Correct placement of the electrostatic sticker for the rear camera.

Operation

Button Functions

Diagram of dash cam buttons with numbers 1 to 5

Diagram showing the location of the control buttons.

Operate Function
Press Power button (6) Turn the dash cam on/off (when the power supply is connected)
Press Function button (11) once Turn the screen on/off.
Press Function button (11) twice Turn on/off the audio recording or switch camera view between front and rear.
Press Restart button (7) once Lock the video for emergency recording.
Press Function button (11) once Enter the album.
Press and hold Restart button (7) One-click photo.
Press Power button (6) once Enter the settings.

Indicator Light

Color Status Function
Green Constantly on Normal recording
Green Fast flash Emergency video recording
Blue Constantly on Deactivated/Stop recording when accessing the album in APP
Blue Fast flash Task in progress
Red/Green Alternating flash Upgrading firmware via TF card.
Red Constantly on Recording error/Dash cam accessing the album

App Installation & Wi-Fi Connection

  1. Download App: Download the "KAWA AUTO" app by scanning the QR code below or searching on Google Play/Apple App Store.

    QR code for KAWA AUTO app download

    Scan to download the KAWA AUTO app.

  2. Connect to Hotspot: Open the "KAWA AUTO" app, click on the "+" in the upper right corner, and follow the on-screen instructions to connect to the dash cam's Wi-Fi hotspot.

    • Hotspot Name: KAWA D11 XXXX
    • Default Password: 12345678

    Note:

    • If VPN is enabled on your phone, please disable it before connecting to the dash cam.
    • If you forget the password, you can reset the device (via settings on the app or device) and then connect using the default password.
Diagram showing dash cam connected to smartphone via WiFi

App connection by built-in WiFi for live preview and video download.

TF Card Usage Guide

1. Specifications:

  • Supports 32GB-256GB capacity with Class 10 or higher speed rating.
  • Use high-speed TF cards from reputable brands. Low-quality TF cards may cause abnormal video recording or TF card failure.

2. Initial Setup:

  • Format the card via the dash cam after initial insertion.
  • Back up important data beforehand (formatting erases all content).

3. Routine Maintenance:

  • Format monthly to maintain read/write performance.
  • Avoid inserting or removing the card while the dash cam is powered on.
  • Replace the card immediately if it experiences read/write errors or abnormal capacity due to repeated overwriting.
Diagram showing recommended TF card capacity and recording times

Recommended TF card capacity and approximate recording durations.

Important Functions

  • Loop Recording: The oldest video will be overwritten when the TF card is full, ensuring continuous recording. The loop recording duration can be adjusted in the app (1/2/3 minutes).

    Illustration of endless loop recording

    Continuous recording ensures no data is lost when the card is full.

  • G-Sensor: When the vehicle experiences a collision or vibrates, the dash cam will automatically start emergency video recording and lock the video to prevent overwriting.

  • Parking Mode (Requires Hardwire Kit): When the dash cam is connected with a hardwire kit, it enables 24-hour parking monitoring. The dash cam will automatically start recording and lock the video when a collision is detected.

  • Time-lapse Recording (Requires Hardwire Kit): After correctly connecting the hardwire kit, enable this feature via the app to achieve 24-hour continuous monitoring. The 30-minute video will be compressed to 1 minute for saving space.

    Emergency recording, 24H parking monitoring, and time-lapse recording features

    Emergency recording, parking monitoring, and time-lapse features.

  • AI-ISP True Color - Night Vision: Captures colors clearly even in moonlight. AI-ISP technology ensures clear images in ultra-low light conditions, making every frame as vivid as real life.

    Comparison of AI-ISP True Color Night Vision vs Normal 4K

    AI-ISP True Color Night Vision provides clear images in low light.

  • Built-in GPS: Records the driving track, calibrates the time, and detects the speed, ensuring the accuracy of accident evidence. Recommended media players for playback are Potplayer or VLC Media Player.

    Illustration of built-in GPS tracking and recommended video players

    Built-in GPS for accurate tracking and evidence.

  • Pre-Record: When recording an emergency video, the pre-recording feature captures the 30 seconds prior to the event and includes it in the emergency video, helping to fully reconstruct the entire incident.

    Pre-record feature capturing 30 seconds before an event

    Pre-record captures crucial moments before an incident.

  • AI Motion Detection (Requires Hardwire Kit): Smart detection and precise monitoring. Timely identification of approaching people and passing vehicles enhances security and saves storage space. This feature requires the use of a Hardwire Kit.

    AI Motion Detection identifying people in a parking lot

    AI Motion Detection for enhanced security in parking mode.

  • H.265 (High Efficiency Video Coding): H.265 encoding offers faster transmission efficiency and higher image quality than H.264, doubling compression and saving 50% of storage space. Please ensure that your player supports the H.265 video format.

    Comparison of H.265 vs H.264 video encoding efficiency

    H.265 encoding for efficient video storage and quality.

  • Lens Distortion Correction: The KAWA D11 with a 150° wide-angle lens provides an exceptional panoramic view of the road for safe driving and incident recording. LDC uses mathematical algorithms to correct image distortions, resulting in more accurate and visually pleasing photos.

    Comparison of D11 lens distortion correction vs others

    Lens Distortion Correction for a clearer, more accurate view.

  • Super Capacitor: Powered by a Super Capacitor, without a lithium-ion battery. This design is fire and explosion-proof, prioritizing safety.

    Super Capacitor for heat and cold resistance

    Super Capacitor ensures reliable operation in extreme temperatures.

Specifications

Parameter Value
Product DASH CAMERA
Model D11
Camera Resolution 3840x2160 (Front), 1920x1080 (Rear)
Special Features AI-ISP, GPS, Pre-record, G-Sensor, Motion Detection, SD/MMC Card, Built-in GPS, Real Time Surveillance, Wide Dynamic Range, WiFi Function, Parking Monitor, Speed and Coordinates Recording, 3D DNR, NightShot Function
View Angle 150° (Front), 135° (Rear)
Lens Aperture F1.8
Lens Type 7-Glass Lens
Working Temperature -4°F (-20°C) ~ 149°F (65°C)
Storage Temperature -22°F (-30°C) ~ 176°F (80°C)
TF Card Capacity 32GB-256GB (Max External Memory: 256G)
Power Supply (Front) 5V/2A
Input (Rear) 5V/0.5A
Power Interface Type-C
Display Size 3.16" IPS Screen
Video Code H.265
Video Format MP4
Imaging Sensor SONY IMX415
Pixels 800Mega
OSD Language Arabic, English, French, German, Hebrew, Japanese, Korean, Polish, Portuguese, Russian, Spanish
GPS Logger Internal
Battery Type Super Capacitor
Certification CE, FCC, RoHS, WEEE
FCC ID 2AZWZ-D11

Important Precautions

1. Installation:

  • The dash cam is powered by the vehicle's 12V accessory socket or USB port. Use the original charger and power cord to ensure a stable connection.
  • Use only the supplied accessories as instructed. Non-compliant accessories may cause damage or detachment, and abnormal operation of the device.
  • Do not install in high-temperature, humid, or wet areas (e.g., near heaters, vents, or doors).
  • Do not install where it obstructs the driver's view or interferes with vehicle safety.

2. Usage:

  • This device is used to record the surrounding environment but does not enhance driving capabilities or prevent accidents.
  • Performance may vary due to vehicle condition, driving environment, or external factors. Poor quality or incompatible TF cards may result in recording failure or data loss.

3. Operation and Environment:

  • Operating temperature range: -4°F (-20°C) to 149°F (65°C).
  • The device should be kept away from water, chemical cleaners, strong magnetic fields, and intense vibrations to prevent malfunctions.
  • Clean the device with a soft, dry cloth.
  • Extended periods of non-use may cause the time to reset; reconnect the app to correct the time.

4. About the Rear Camera:

  • The rear camera powers on and off automatically when the front camera is powered on/off.
  • The footage captured by the rear camera is automatically stored on the front camera's TF card.
  • Do not insert or remove the rear camera cable while the device is powered on, as this may cause damage to the product.

Troubleshooting (FAQs)

Q: TF card incompatible (Remind to format)
A: The TF card needs to be adapted to the dashcam. Please follow the voice prompts to format it. Replace the TF card if necessary.
Q: Wi-Fi shows as unavailable on the phone (No Internet Connection)
A: This is normal as the dash cam creates its own local Wi-Fi hotspot for direct connection. Ignore this message and reconnect to the dashcam via the app.
Q: Cannot find the recorded video
A: Enter the app, go to "Live Preview" > "Album", and view all videos.
Q: Dash cam not recording
A: Reset the dash cam or replace the TF card.
Q: Emergency recording frequently
A: Adjust the G-sensor sensitivity in the settings according to your needs or turn it off.
Q: Forgot the modified hotspot password
A: Reset the device (this can be performed through the settings on the app or the device itself), and the default password will be reset to 12345678.
Q: The app crashes or lags
A: Avoid using the dash cam's WiFi in environments with multiple devices or strong signal interference.
Q: Unable to connect to the dashcam
A: Check phone permissions for the KAWA AUTO app. If needed, restart the app, reset the device, and retry the connection.
Q: Dash cam not working
A: Power the device with 5V/2A. Check if the car charger and the device's power interface work properly.
Q: GPS not displayed
A: Please drive the vehicle to an open area. The positioning process may take some time. Reset the recorder and turn it on again if necessary.
Q: Rear camera mirror image
A: Since the recording angle is opposite to the viewer's perspective, the video recorded during live streaming will normally appear mirrored. This is expected behavior. If you have further concerns, please contact the KAWA support team.
Q: Can the camera connect to an external Wifi and live stream or may I see remotely on a cell phone what the camera sees?
A: The camera connects directly to a smartphone via its own WiFi hotspot for live viewing and video access, but remote monitoring over the internet is not supported. (Based on buyer feedback)
Q: Can I know if the camera records 24 hours?
A: Yes, the camera can record 24 hours when used with a hardwire kit, enabling parking mode and continuous monitoring. (Based on buyer feedback)
Q: Parking mode with OBD adapter?
A: Parking mode works reliably when connected directly to the fuse box, though some users note it may not function with certain OBD adapters. (Based on buyer feedback)

User Tips

  • The 4K image quality is impressive both day and night, with clear details and visible license plates.
  • Installation and operation are generally simple, and the app facilitates quick connection and adjustment.
  • The Wi-Fi hotspot is practical for direct smartphone access to watch or download videos.
  • For parking monitoring, ensure direct power supply through the fuse box for reliable function, as some OBD adapters may not work.
  • The included cables for both front and rear cameras are sufficiently long for most installations.
  • The phone app performs well for managing recordings and settings.

Warranty & Support

The KAWA Dash Cam D11 comes with a 2-year warranty.

For technical support, inquiries, or warranty claims, please contact:

  • E-mail: support@kawa-in.com
  • Website: www.kawa-in.com
  • Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
  • Address: FLAT A2 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG

Replies are typically provided within 24 hours.

© 2024 KAWA. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.