Introduction
The Tuya Wifi ME901H Smart Thermostat is an intelligent temperature control device designed for gas wall-mounted boilers and valve actuators. It offers convenient control over your heating system through a mobile application, voice assistants like Amazon Alexa and Google Home, and manual operation. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and comfort.

Important Note: A Zigbee gateway is required and must be purchased separately to enable Wi-Fi connectivity and smart features.
Setup and Installation
1. Package Contents
- Tuya Wifi ME901H Smart Thermostat
- Mounting Screws
- User Manual (this document)
- Optional: External Sensor (depending on purchased variant)
2. Physical Installation
Ensure power is turned off at the main circuit breaker before beginning installation. Installation should be performed by a qualified electrician if you are unsure.

The thermostat unit measures approximately 9cm (3.54in) in height, 8.6cm (3.39in) in width, and 2.08cm (0.82in) in depth. The mounting hole distance is 6cm (2.36in).
The receiver unit (if applicable) measures 86mm x 86mm x 25mm.
3. Wiring Diagrams
Refer to the following diagrams for correct wiring based on your heating system type. Always consult a professional if you are not confident with electrical wiring.

- Top Diagram (Gas Wall-mounted Boiler): Shows connections for a gas boiler. Live (L) and Neutral (N) power input (85-250VAC) to the thermostat. The thermostat's output (COM, NO) connects to the boiler's control terminals.
- Second Diagram (Valve Actuator): Illustrates wiring for a valve actuator. Power input (85-250VAC) to the thermostat. The thermostat's output (COM, NO) connects to the valve actuator.
- Third Diagram (Water Gas Boiler): Similar to the gas wall-mounted boiler, showing connections for a water gas boiler.
- Bottom Diagram (External Sensor): If your model includes an external sensor, connect it to the designated terminals on the thermostat's back panel.

4. Battery Installation
The thermostat is powered by 2x 1.5V alkaline AA batteries. Open the battery compartment on the back of the unit, insert the batteries, ensuring correct polarity, and close the compartment.
5. Initial Configuration & App Connection
To utilize smart features, the thermostat needs to be connected to a Zigbee gateway, which then connects to your Wi-Fi router.

- Ensure your Zigbee gateway is powered on and connected to your home Wi-Fi network.
- Download the Tuya Smart or Smart Life app from your mobile device's app store.
- Register or log in to your account.
- Follow the in-app instructions to add your Zigbee gateway.
- Once the gateway is added, follow the app's instructions to add the ME901H thermostat to the gateway. This usually involves putting the thermostat into pairing mode (refer to the thermostat's display or specific pairing instructions in the app).
- Once connected, you can control the thermostat via the app.
Operating Instructions
1. Basic Operation (Manual Control)
The thermostat features a clear digital display and intuitive buttons for manual control.

- Power Button: Turns the thermostat on/off.
- Up/Down Buttons (+/-): Adjust the target temperature.
- Mode Button (M): Cycles through different operating modes (e.g., manual, programmed).
- Clock/Timer Button: Accesses time and programming settings.
The display shows current room temperature, set temperature, time, day of the week, and various status icons (Wi-Fi, battery, heating active, lock, sleep mode).

The thermostat offers precise temperature control with a temperature hysteresis of 0.5~10°C, a minimum temperature setting of 0.5°C, and temperature calibration from -9.9~9.9°C.
2. Mobile App Remote Control
Once connected to the Tuya Smart/Smart Life app via the Zigbee gateway, you can control your thermostat from anywhere, anytime.

- Adjust temperature settings.
- Change operating modes.
- Set heating schedules.
- Monitor real-time temperature and view historical data.

3. Voice Control Integration
The thermostat is compatible with Amazon Alexa and Google Home. Link your Tuya Smart/Smart Life account to your preferred voice assistant app to enable voice commands for temperature adjustments and status checks.
4. Group Control Function
For multi-zone heating or multiple thermostats in different rooms, the app supports group control. This allows you to manage several thermostats simultaneously for specific scenarios.

Maintenance
- Cleaning: Wipe the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace the AA batteries when the low battery indicator appears on the display. Ensure to use new alkaline batteries.
- Firmware Updates: Periodically check the Tuya Smart/Smart Life app for available firmware updates to ensure optimal performance and security.
Troubleshooting
- Thermostat not powering on: Check battery installation and ensure they are new. Verify main power supply if wired.
- No heating/cooling: Check wiring connections to the boiler/actuator. Ensure the thermostat is in the correct operating mode and the set temperature is above/below the ambient temperature.
- Cannot connect to app: Ensure the Zigbee gateway is properly set up and connected to Wi-Fi. Make sure the thermostat is in pairing mode. Check your Wi-Fi signal strength.
- Inaccurate temperature reading: Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources. If an external sensor is used, ensure it is correctly placed and connected. Consider using the temperature calibration feature in the settings.
- Voice control not working: Verify that your Tuya Smart/Smart Life account is correctly linked to Amazon Alexa or Google Home. Check internet connectivity.
Specifications
| Feature | Specification |
|---|---|
| Model Number | ME901H (Tuya Zigbee Smart Thermostat) |
| Power Supply | 2x 1.5V alkaline AA batteries |
| Temperature Setting Range | 5~95℃ |
| Temperature Differential (Temp.Dif) | 0.5-10℃ (Factory setting: 1℃) |
| Ambient Temperature Range | -5~50℃ |
| Setting Temperature Accuracy | 0.5℃ |
| Protection Level | IP20 |
| Shell Material | Anti-Flammable PC |
| Thermostat Dimensions (H x W x D) | 9cm x 8.6cm x 2.08cm (approx. 3.54in x 3.39in x 0.82in) |
| Receiver Dimensions (H x W x D) | 86mm x 86mm x 25mm (if applicable) |
| Connectivity | Zigbee (requires separate gateway for Wi-Fi) |
| Compatibility | Gas Wall-mounted Boilers, Valve Actuators, Amazon Alexa, Google Home |
| Certification | CE |
| Origin | Fr (France) |
User Tips
Based on common user experiences, here are some tips for getting the most out of your thermostat:
- Optimal Gateway Placement: Place your Zigbee gateway centrally within your home to ensure a strong and stable connection to all your Zigbee devices, including the thermostat.
- Battery Life: To maximize battery life, consider setting the backlight to auto-off. High usage of the backlight or frequent temperature changes can drain batteries faster.
- Scheduling for Efficiency: Utilize the app's scheduling features to program your heating according to your daily routine. This can significantly improve energy efficiency and comfort.
- Temperature Calibration: If you find the thermostat's temperature reading differs from another trusted thermometer in the same room, use the temperature calibration setting in the app or advanced menu to fine-tune it.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.