1. Introduction
Thank you for purchasing the DIVOOM Espresso Wireless Bluetooth Speaker. This compact and elegant speaker offers premium audio quality with multiple playback modes, including Bluetooth, FM radio, and TF card support. This manual will guide you through the setup, operation, and maintenance of your new speaker.
2. Setup
2.1. Charging the Speaker
- Connect the provided USB charging cable to the speaker's USB port.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Once fully charged, the light may change color or turn off.
2.2. Powering On/Off
- To power on, press and hold the power button (usually integrated with the volume knob) for a few seconds until you hear an audible prompt or see an indicator light.
- To power off, press and hold the power button again for a few seconds.
3. Operating Instructions
3.1. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (usually indicated by a flashing blue LED). If not, short press the mode button to switch to Bluetooth mode.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "DIVOOM Espresso" from the list of devices.
- Once paired, the speaker will indicate a successful connection (e.g., solid blue LED, audible prompt).
3.2. FM Radio Mode
- Short press the mode button to switch to FM radio mode.
- To auto-scan and save stations, press and hold the play/pause button. The speaker will scan and store available FM stations.
- Use the volume knob or dedicated track buttons (if available) to switch between saved stations.
3.3. TF Card Playback
- Insert a TF (MicroSD) card with MP3 audio files into the TF card slot.
- The speaker should automatically switch to TF card playback mode. If not, short press the mode button until it enters TF card mode.
- Use the play/pause button to control playback and the track buttons to navigate between songs.
3.4. Volume Control
- Rotate the volume knob (typically located on the top or side) to adjust the playback volume.
4. Maintenance
- Keep the speaker away from water and excessive moisture.
- Avoid exposing the speaker to extreme temperatures.
- Clean the speaker with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the speaker in a cool, dry place when not in use for extended periods.
5. Troubleshooting
- Q: Speaker does not power on.
- A: Ensure the speaker is fully charged. Connect it to a power source and try again.
- Q: Cannot pair with Bluetooth device.
- A: Make sure the speaker is in Bluetooth pairing mode (flashing LED). Check that your device's Bluetooth is enabled and within range. Try restarting both the speaker and your device.
- Q: No sound or low volume.
- A: Check the volume level on both the speaker and your connected device. Ensure the speaker is properly paired or the TF card is inserted correctly. If using FM radio, check for signal strength.
- Q: FM radio reception is poor.
- A: Try repositioning the speaker to improve reception. Ensure you are not in an area with heavy interference.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XinoJunou (DIVOOM Espresso) |
| Weight | 85g |
| Depth | 60mm |
| Width | 31mm |
| Height | 47.6mm |
| Input/Output | USB |
| Battery Capacity | 500mAh |
| Sound Mode | Other |
| Category | Speakers |
| Sabwoofer cabinet material | Metal |
| Woofer/Widerange material | Other |
| Mid-range material | Other |
| Sensitivity | 78dB |
| Bluetooth Version | 5.0 |
| Input Power(W) | <25 W |
| Active Noise-Cancellation | Active |
| Impedance | 3 Ohm |
| Voice Control | No |
| Frequency Range | 100Hz-20KHz |
| Display Screen | No |
| Waterproof | No |
| Support APP | No |
| Material | Plastic |
| Playback Function | MP3 |
| Inbox adaptor | Yes |
| Intelligent Personal Assistant | None |
| Built-in Microphone | No |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Power Source | Battery |
| PMPO | 5 W |
| Channels | 2 (2.0) |
| Battery | Yes |
| Communication | Bluetooth, Audio Line |
| Speaker Type | Portable |
| Cabinet Material | Plastic |
| Origin | Mainland China |
| Remote Control | No |
| Output Voltage | 5 W |
| Support Memory Card | No |
| Certification | CE |
7. User Tips
- For optimal sound quality, ensure the speaker is placed on a stable, flat surface.
- Keep your connected Bluetooth device within a reasonable range (typically up to 10 meters) for a stable connection.
- When using FM radio, extending any built-in antenna or moving to an open area can improve signal reception.
- Regularly check for firmware updates (if available from the manufacturer's website) to ensure the best performance and features.
8. Warranty and Support
For warranty information and customer support, please refer to the official DIVOOM website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.