OBD2 Scanner V519

Contents

V519 OBD2 Scanner Instruction Manual

Handheld Vehicle Inspection and Fault Diagnostic Tester

1. Product Overview

The V519 OBD2 Scanner is a professional-level diagnostic tool designed for vehicle inspection and fault diagnosis. It supports all OBD II compliant models and offers a wide range of functions including reading and clearing fault codes, live data streaming, battery voltage testing, and more. This manual provides detailed instructions for its use.

V519 OBD2 Scanner with key features
Figure 1: V519 OBD2 Scanner highlighting its main features: Full OBDII Modes, Live Data Stream, Battery Voltage Test, Faster Processing Chip, and 35,901 DTC Library.
V519 OBD2 Scanner dimensions and self-diagnosis features
Figure 2: V519 OBD2 Scanner showing its compact dimensions (approx. 6in x 3.45in) and features for easy self-diagnosis, including reading/erasing codes, viewing freeze frame, and tracking maintenance.

2. Safety Information

  • Always perform automotive testing in a safe environment.
  • Do not wear loose clothing or jewelry when working on an engine.
  • Keep the scanner away from water, oil, and grease.
  • Ensure the vehicle is in PARK (P) or NEUTRAL (N) and the parking brake is engaged.
  • Do not connect or disconnect the scanner while the ignition is on or the engine is running.

3. Setup and Connection

  1. Locate the OBD-II Port: The OBD-II port is usually located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's manual if you cannot find it.
  2. Connect the Scanner: With the vehicle's ignition off, firmly plug the V519 scanner's cable into the vehicle's OBD-II port.
  3. Power On: Turn the vehicle's ignition to the "ON" position (engine off). The scanner will power on automatically via the OBD-II connection.
  4. Verify Connection: The scanner features indicator lights. A green light indicates a successful connection, while red or orange may indicate a fault or connection issue.
Video 1: Demonstration of V519 OBD2 Scanner connection and basic functions, including reading and clearing fault codes, live data, and settings.

3.1. Initial Settings

Navigate to the 'Setup' menu on the scanner to configure the following:

  • Language: Select your preferred language from the available options (English, Spanish, French, German, Italian, Dutch, Portuguese, Chinese, Japanese, Russian).
  • Unit of Measure: Choose between metric or imperial units.
  • Contrast: Adjust screen brightness for optimal viewing.
  • Beep: Enable or disable audible alerts.
  • Color Scheme: Customize the display colors.

4. Operating Instructions

The V519 scanner provides a comprehensive suite of diagnostic functions. Use the directional buttons and 'OK' button to navigate the menus.

V519 OBD2 Scanner showing full OBD II functions in a car interior
Figure 3: Overview of the V519 OBD2 Scanner's main menu, displaying various diagnostic functions.

4.1. Main Functions

  • Read Codes: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer. These codes indicate specific issues.
  • Erase Codes: Clears DTCs from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL) or "Check Engine" light. Ensure the underlying issue is resolved before clearing codes.
  • View Freeze Frame: Displays a snapshot of sensor data at the moment a fault code was set, providing valuable context for diagnosis.
  • I/M Readiness: Checks the status of emission-related monitoring systems to determine if they are ready for an emissions test.
  • Vehicle Info: Retrieves vehicle identification number (VIN), calibration ID, and calibration verification number.
  • Data Stream: Displays real-time data from the vehicle's sensors, such as engine RPM, vehicle speed, oxygen sensor readings, and more. This can be viewed as a list of values.
  • Battery Voltage Reading: Shows the current voltage of the vehicle's battery.
  • Mode 6 Detection: Accesses results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored.
  • Oxygen Sensor Test: Retrieves oxygen sensor monitor test results.
  • Mode 8 Detection: Performs a component test, such as an EVAP system leak test.
  • DTC Lookup: Allows you to manually enter a fault code (e.g., P0000) to get its definition from the scanner's extensive 35,901 fault code library.
  • Playback Function: Reviews previously saved DTCs and data streams.
  • Print/Upgrade Function: Connect the scanner to a computer via USB to print diagnostic reports or update the scanner's firmware.
V519 OBD2 Scanner demonstrating engine fault diagnosis
Figure 4: The V519 scanner in use, demonstrating engine fault diagnosis by quickly reading and clearing the engine failure light.
V519 OBD2 Scanner showing car information (Freeze Frame, IM, Vehicle Info, Voltage)
Figure 5: Display of various car information screens on the V519, including Freeze Frame data, I/M Readiness status, Vehicle Information, and Battery Voltage.

5. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Software Updates: Regularly check for and install software updates to ensure optimal performance and compatibility with the latest vehicle models and diagnostic protocols. Updates are typically performed by connecting the scanner to a computer.

6. Troubleshooting

ProblemPossible CauseSolution
Scanner does not power on.Loose connection to OBD-II port; vehicle ignition not on.Ensure the cable is firmly connected. Turn the vehicle ignition to the "ON" position.
"Connection Fails" (Orange indicator).Vehicle not OBD-II compliant; faulty connection; vehicle's ECU is not responding.Verify vehicle is OBD-II compliant (most vehicles from 1996 onwards). Check cable connection. Try on another OBD-II compliant vehicle if possible.
Cannot read fault codes.No fault codes present; connection issue.Ensure the "Check Engine" light is on. Verify successful connection (Green indicator).
No USB functionality / Missing functions.Misunderstanding of features; device limitation.The V519 supports USB for printing reports and firmware updates. It does not function as a general USB storage device. Refer to the 'Operating Instructions' for a list of supported functions.

7. Specifications

  • Model: V519
  • Display: 2.8-inch Color Screen
  • DTC Library: 35,901 Fault Codes
  • Power Source: USB Powered (via OBD-II port)
  • Batteries: Not included (device is powered by the vehicle's OBD-II port)
  • Dimensions (approx.): 15.24 cm (6 in) x 8.76 cm (3.45 in)
  • Supported Languages: English, Spanish, French, German, Italian, Dutch, Portuguese, Chinese, Japanese, Russian.
  • Package Dimensions: 20 cm (Length) x 13 cm (Width) x 4 cm (Height)
  • Package Weight: 0.208 kg

7.1. Compatibility

The V519 OBD2 Scanner supports all OBD II compliant models. This includes most vehicles manufactured in the USA since 1996, in the European Union since 2001 (petrol) or 2004 (diesel), and in Asia since 2008.

  • Diesel Vehicles: Yes, compatible with OBD-II compliant diesel vehicles.
  • Specific Models: If your vehicle is OBD-II compliant, the scanner should work. This includes models like Hyundai Terracan 2.5 (2001), Dacia (new models), Chevrolet Tracker, Nissan Qashqai (2019 1.3 Turbo), Suzuki APV, Nissan AD, Opel Insignia 1.6T (2010), and Fiat Grande Punto, provided they are OBD-II compliant.

8. User Tips

  • Confirm OBD-II Compliance: Before purchasing or using, ensure your vehicle is OBD-II compliant to avoid compatibility issues.
  • Check Connection Indicators: Pay attention to the red/orange/green lights on the scanner. Green means a good connection, allowing for accurate diagnostics.
  • Utilize DTC Lookup: For any unfamiliar fault codes, use the built-in DTC Lookup function to quickly understand the problem without needing external resources.
  • Regular Updates: Keep the scanner's firmware updated to ensure it has the latest vehicle protocols and bug fixes.

9. Support

For technical assistance or inquiries, please refer to the seller's support channels. The product is designed for ease of use and reliability.

9.1. Returns and Refunds

The seller offers a policy for fast delivery and refunds for various issues, including delayed delivery, lost packages, or damaged items. Additionally, free returns are available within 90 days of purchase.

© 2025 V519 OBD2 Scanner. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.