HORACO ZX-SW82TS-L2P

Contents

HORACO 2.5Gb L2 Managed PoE Switch User Manual

Model: ZX-SW82TS-L2P

1. Product Overview

This HORACO 2.5Gb L2 Managed PoE Switch (Model: ZX-SW82TS-L2P) is designed for high-performance network transmission and communication applications. It features 8x 2.5G PoE ports and 2x 10G SFP+ optical ports, providing stable and reliable data transmission for various network devices.

HORACO 2.5Gb L2 Managed PoE Switch front view

Front view of the HORACO 2.5Gb L2 Managed PoE Switch.

1.1 Key Features

  • 8x 2.5G RJ45 PoE Ports
  • 2x 10G SFP+ Optical Ports
  • L2 Managed capabilities (VLAN, LACP, QoS, SNMP, etc.)
  • 120W Max PoE Power Output
  • Supports IEEE802.3af/at/bt PoE standards
  • Fanless heat sink design for efficient heat dissipation
  • 6KV Lightning Protection

1.2 Port Description

HORACO 2.5Gb L2 Managed PoE Switch port layout diagram

Detailed port layout of the switch.

Port / Button Description
Reset Button Restores factory settings (if applicable)
PoE Indicator Light Indicates PoE status for each port
1-8 (RJ45) Ports 8x 100M/1G/2.5G PoE Ports
Console Port RJ45 console management port for multiple access devices
9-SFP+, 10-SFP+ 2x 1G/2.5G/10G SFP+ Optical Ports
Power Input DC 52V 2.3A (Max 120W)
Ground Screw For grounding the device

1.3 LED Status Description

LED indicator status for Link/Act and PoE

Visual guide for Link/Act and PoE LED indicators.

Indicator Status Meaning
Power (SYS LED) ON Device powered on
Link/Act (10M/100M/1G) Green: Always on Network connection at 10M/100M/1G rate
Link/Act (10M/100M/1G) Yellow: Not on No network connection at 10M/100M/1G rate
Link/Act (2.5G) Yellow: Always on Network connection at 2.5G rate
Link/Act (2.5G) Green: Flashing Data transmission in progress at 2.5G rate
PoE (Ports 1-8) ON PoE power is being supplied

2. Package Contents

Please check whether the following items are included in your package:

  • HORACO 2.5Gb L2 Managed PoE Switch (ZX-SW82TS-L2P) x1
  • Power Adapter (DC 52V 2.3A) x1
  • User Manual x1
  • Accessories x1 (If applicable)

If any item is missing or damaged, please contact the seller for assistance.

3. Setup Instructions

Step 1: Check Equipment

Confirm all accessories are complete and the device is undamaged before proceeding with installation.

Step 2: Connect Power

Connect the supplied power adapter (DC 52V 2.3A) to the power input port on the switch and then to a suitable power outlet.

PoE power distribution diagram

PoE power distribution: Port 1 supports up to 90W, Ports 2-8 support up to 30W each, with a total power budget of 120W.

Step 3: Connect Network Cable

Use an Ethernet cable to connect the uplink port (any of the 2.5G RJ45 ports or 10G SFP+ ports, depending on your network architecture) to your router, main switch, or network source.

Step 4: Connect Terminal Devices

Connect your compatible network devices to the available PoE ports. This switch supports a variety of devices, including:

  • Routers
  • Wireless Access Points (APs)
  • Computers
  • Other Network Devices
  • IP Cameras
Diagram showing switch connecting to various 2.5G/10G equipment

The switch meets 2.5G/10G equipment requirements for devices like routers, NAS, 4K TVs, and PCs.

Step 5: Verify Device Status

After connecting all necessary cables, check the LED indicators on the front panel to confirm the device is operating normally. Refer to the "LED Status Description" section for details.

4. Network Management Functions

The HORACO ZX-SW82TS-L2P is an L2 managed switch, offering comprehensive web-based management capabilities for advanced network configuration and monitoring.

Diagram illustrating various network management functions

Overview of supported network management functions.

Screenshots of web management interface for VLAN, Link Aggregation, DHCP, and PoE Port Configuration

Examples of the web management interface for various configurations.

4.1 Supported Functions

  • VLAN Configuration: Supports VLAN settings for flexible division of multiple LANs.
  • Link Aggregation (LACP): Increases link bandwidth and provides redundancy.
  • DHCP Configuration: Manages IP address assignment.
  • PoE Port Configuration: Controls power delivery to connected PoE devices.
  • Spanning Tree Protocol (STP): Prevents network loops.
  • SNMP: For network monitoring and management.
  • QoS (Quality of Service): Prioritizes network traffic.
  • Port Mirroring: For network analysis and troubleshooting.
  • ACL (Access Control List): Enhances network security.
  • System Tools: Save/Backup/Restore Configuration, Software Upgrade, Ping Tool, System Reboot.
VLAN segmentation diagram with router and switches

Example of VLAN segmentation for multi-device applications.

5. Operating Restrictions and Safety Information

5.1 Operating Restrictions

  • Indoor use only (unless otherwise specified).
  • Do not expose the product to rain, water, or humid environments.
  • Use within the rated voltage and power specifications.
  • Do not block ventilation openings during operation.
  • Avoid installation near high-temperature environments or heat sources.
  • Do not use damaged power cables or accessories.

5.2 Safety Information

Please read the following safety instructions carefully before use:

  1. Do not disassemble, repair, or modify the product without authorization.
  2. Keep the product away from water, fire, and corrosive substances.
  3. Disconnect power before cleaning or maintenance.
  4. Use only compatible power supplies and accessories.
  5. Keep the product out of reach of children.
  6. Stop using the product immediately if overheating, smoke, or unusual odor occurs.
  7. Avoid dropping, striking, or applying strong impact to the device.

6. Technical Specifications

Technical specifications table from product image

Detailed technical specifications including LED indicators, working environment, and network management features.

Product parameters including dimensions and performance

Product dimensions and performance parameters.

Transmission distance, power, and PoE specifications

Transmission distance, power supply, and PoE port specifications.

Feature Specification
Model ZX-SW82TS-L2P
Power Input External DC: 52V 2.3A, Max 120W (100-240Vac 50-60Hz 1.5A)
Network Standards IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x
Port Definition 8x 100M/1G/2.5G RJ45 PoE Ports, 2x 1G/2.5G/10G SFP+ Optical Ports, 1x Console RJ45 Port
PoE Standard Port 1: IEEE802.3af/at/bt (HiPoE) MAX 90W; Ports 2-8: IEEE802.3af/at MAX 30W
PoE Pin Af/at/bt: 1,2+, 4,5+; 3,6-, 7,8-; Af/at: 1,2+, 3,6-
Total PoE Power 120W (Max)
Transmission Rate 2000 Mbps (Full-Duplex & Half-Duplex)
Switch Capacity 80Gbps
Packet Forwarding Rate 59.52Mpps
MAC Address Table 16K
Flash 256Mbytes
Jumbo Frame 12K
Buffer 12Mbit
Forwarding Mode Store and Forward
Main Chip Realtek RTL9302D
Operating Temperature -10°C to 55°C
Storage Temperature -40°C to 75°C
Operating Humidity 5%~90% RH Non-condensing
Storage Humidity 5%~95% RH Non-condensing
Transmission Distance 100Base-T: Cat 5 or above UTP (≤150m); 1000Base-TX: Cat 6 or above UTP (≤150m); 2500Base-TX: Cat 6 or above UTP (≤100m); SFP: 100M/1G/2.5G/10G single/multi-mode optical module, max ≤120km
Installation Desktop
Lightning Protection 6KV
Certification CE, FCC, RoHS
Product Dimensions (L×W×H) 230mm × 115mm × 33mm
Net Weight 0.8KG
Gross Weight 1.49KG
Package Dimensions (L×W×H) 260mm × 220mm × 68mm

7. Troubleshooting

Problem Solution
Device does not power on Check power connection and power supply compatibility. Ensure the correct DC 52V 2.3A adapter is used.
No network connection Verify Ethernet cable connections and network configuration. Check Link/Act LEDs.
PoE device not working Confirm the connected device is compatible with IEEE802.3af/at/bt PoE standards. Check the PoE indicator light for the respective port. Ensure the total power budget of 120W is not exceeded.

8. User Tips

  • Web Management: The switch offers a comprehensive web management interface. Utilize this for advanced configurations such as VLAN segmentation, Link Aggregation, QoS, and SNMP to optimize your network performance and security.
  • Rack Mounting: While designed for desktop use, some users may wish to integrate the switch into a 19-inch rack. Consider sourcing third-party rack-mounting brackets if this is desired, as they are not included with the standard package.
  • Power Adapter Warranty: Be aware that the warranty period for the power adapter may differ from the main switch unit. It is advisable to check specific warranty terms for accessories.

9. Warranty and Support

This HORACO product comes with a 1-Year Warranty. Additionally, customers benefit from Lifetime Professional Technical Support to assist with any operational or configuration queries.

For technical assistance or warranty claims, please contact HORACO Official Store customer service.

10. Compliance Statement

This product complies with applicable safety and environmental requirements for sale and use in the European market, including CE, FCC, and RoHS certifications.

For a complete digital version of this manual, please refer to the User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.