1. Product Overview
The UGREEN BT505 is a versatile Bluetooth audio receiver designed to bring wireless audio streaming capabilities to your existing wired audio systems. It supports high-resolution audio codecs like LDAC and AAC, ensuring a high-fidelity listening experience. With Bluetooth 6.0 technology, it offers a stable and low-latency connection.
Package Contents
- 1 x UGREEN BT505 Bluetooth Audio Receiver
- 1 x USB-C Charging Cable (3FT/1M)
- 1 x 3.5mm Audio Cable (3FT/1M)
- 1 x User Manual (PDF available online: View PDF)
Device Layout


2. Setup and Connection
Initial Setup
- Charge the Receiver: Before first use, fully charge the BT505 using the provided USB-C cable and a 5V power adapter (not included). The red light stays on during charging and turns off when fully charged.
- Connect to Audio System: Connect the BT505 to your speaker, amplifier, or car radio using either the 3.5mm audio cable or the 2RCA audio cable.

Pairing with a Bluetooth Device
- Power On: Press and hold the Multi-function Button for 3 seconds. The blue light will stay on for one second, and you will hear a "Power on" voice notification.
- Enter Pairing Mode: If it's the first time powering on or there's no connection history, the device will automatically enter pairing mode. The Red and Blue Lights will Flash Alternately, and you will hear "Pairing". If already powered on, double-click the Multi-function button to enter pairing mode.
- Connect via Bluetooth: On your phone or other Bluetooth device, enable Bluetooth, search for "UGREEN-BT505", and select it to pair.
- Pairing Successful: Once connected, the blue light will flash once every ten seconds, and you will hear "Bluetooth connected".

Dual Device Connection
The BT505 supports connecting to two Bluetooth devices simultaneously. After successfully pairing with the first device, put the receiver back into pairing mode (double-click the multi-function button) and connect with the second device. To disconnect one device in dual-device mode, double-click the multi-function button to disconnect the device that is not currently playing music or the first device that was connected.
3. Operating Instructions
Function Table
| Function | How to Use | Indicator Light | Voice Notification | Notes |
|---|---|---|---|---|
| Power on | Press the Multi-function Button for 3 Seconds | The blue light stays on for one second | Power on | |
| Power off | Press the Multi-function Button for 3 Seconds | The Red light stays on for one second | Power off | |
| Enter pairing mode | Double-click the "Multi-function button" when powered on | Red and Blue Lights Flash Alternately | Pairing | 1. First power-on (no connection history), automatically enters pairing mode. 2. In no connection state, double-click the multi-function button to enter pairing mode (if not connected within 5 minutes in pairing mode, it will automatically turn off). 3. In the connected dual-device mode, double-click to disconnect the device that is not playing music or the first device that was connected. |
| Pairing successful | / | The Blue Light Flashes Once Every Ten Seconds | Bluetooth connected | When the phone is playing music, the indicator light will display according to the current audio codecs in use. The indicator light will stay on for 3 seconds every 10 seconds. Indicator light status for different codecs is as follows: SBC: Cyan, AAC: Blue, LDAC: Green. |
| Play / Pause | Press the "Multi-function button" once while music is playing | / | / | |
| Power-on auto reconnect | / | The Blue Light Flashes Once Every Five Seconds | / | If there is a connection history, the product will automatically reconnect within 16 seconds after powering on. If the reconnection fails, it will enter pairing mode. |
| Restore factory settings | Press the "Multi-function button" for ten seconds when power on | The blue light stays on for five seconds | / | Automatically power on and enter pairing mode after completion. |
| Low battery warning | / | The Red Light Flashes Once Every Ten Seconds | Low battery | |
| Charging | / | Red light stays on. Fully charged: Red light turns off. | / | The red charging indicator light is located above the position of the product status indicator light. |
4. Maintenance
To ensure the longevity and optimal performance of your UGREEN BT505 Bluetooth Receiver, please follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. For long-term storage, charge the device to about 50% and recharge every few months.
- Firmware Updates: Check the official UGREEN website periodically for any available firmware updates that may improve performance or add features.
- Factory Reset: If you experience persistent issues or wish to clear all paired devices, perform a factory reset by pressing the Multi-function button for ten seconds when powered on.
5. Troubleshooting
- Device won't power on: Ensure the battery is charged. Connect the USB-C charging cable and try again.
- Cannot pair with a device:
- Make sure the BT505 is in pairing mode (Red and Blue lights flashing alternately).
- Ensure Bluetooth is enabled on your source device and it's within the 10m/33ft range.
- Try turning off and on Bluetooth on your source device.
- Clear the paired device list on the BT505 by performing a factory reset.
- Poor audio quality or disconnections:
- Ensure there are no obstructions between the BT505 and your source device.
- Move closer to the BT505 to reduce interference.
- Check if other wireless devices are causing interference.
- Verify that the audio cables are securely connected.
- No sound:
- Check the volume levels on both your source device and the connected audio system.
- Ensure the correct input source is selected on your audio system.
- Verify that the BT505 is successfully paired and connected.
- Low battery warning frequently: The battery might be degrading. Refer to the 'User Tips' section for more information.
6. Specifications
| Feature | Specification |
|---|---|
| Model | BT505 |
| Wireless Type | Bluetooth |
| Bluetooth Version | 6.0 |
| Bluetooth Profile | A2DP/AVRCP/HSP/HFP |
| Audio Codecs | SBC/AAC/LDAC |
| Frequency Band | 2400MHz-2483.5MHz |
| Max. RF Output Power | 4dBm (EIRP) |
| Transmission Distance | 10m/33ft (no blocking) |
| Audio Ports | 3.5mm / 2RCA |
| Charging Port | USB-C |
| Battery Type | Polymer lithium-ion battery |
| Battery Capacity | 300mAh 3.7V (1.11Wh) |
| Limited Charging Voltage | 5.25V |
| Charging Time | About 2 hours |
| Operating Time | About 15 hours |
| Dimensions (L x W x H) | 2.62 x 2.03 x 0.78 inches |
| Origin | Mainland China |
7. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the official UGREEN website or the contact information provided in the full user manual (PDF). Keep your purchase receipt for warranty claims.
For further assistance, you may also consult the comprehensive user manual available as a PDF: UGREEN BT505 User Manual (PDF).
8. User Tips
- Battery Longevity: While the device boasts up to 15 hours of operating time, battery performance may naturally decrease over time with repeated charging cycles. After about a year of regular use, you might notice a reduction in the maximum operating time.
- iPhone Compatibility: The UGREEN BT505 is fully compatible with iPhones and other iOS devices, allowing seamless audio streaming.
- No Built-in Microphone: Please note that this receiver does not include a built-in microphone. It is designed for audio output only, so it cannot be used for hands-free phone calls.
9. Frequently Asked Questions (FAQ)
- Q: Does the UGREEN BT505 work with older mini-stereo systems?
- A: Yes, if your mini-stereo system has a 3.5mm AUX input or RCA audio input ports, the BT505 can connect to it and enable Bluetooth audio streaming.
- Q: Is this device compatible with iPhones?
- A: Yes, the UGREEN BT505 is compatible with iPhones and other smartphones that support Bluetooth connectivity.
- Q: Can I use this receiver to make phone calls?
- A: No, the UGREEN BT505 is an audio receiver designed for playing music and other audio content. It does not have a microphone and therefore cannot be used for phone calls.