UGREEN BT505

Contents

UGREEN BT505 Bluetooth Audio Receiver User Manual

Model: BT505

1. Introduction

Thank you for choosing the UGREEN BT505 Bluetooth Audio Receiver. This device allows you to wirelessly stream high-quality audio from your Bluetooth-enabled devices to your non-Bluetooth audio systems, such as home stereos, car speakers, or wired headphones. Featuring Bluetooth 6.0 technology and support for LDAC, AAC, and SBC codecs, the BT505 delivers an exceptional, lossless Hi-Fi audio experience with lower latency and stable connectivity.

UGREEN BT505 Bluetooth Audio Receiver
UGREEN BT505 Bluetooth Audio Receiver, front view showing RCA and AUX ports.

2. Package Contents

Please check the package for the following items:

  • 1 x UGREEN BT505 Bluetooth Audio Receiver
  • 1 x USB-C Charging Cable (3FT/1M)
  • 1 x 3.5mm Audio Cable (3FT/1M)
  • 1 x User Manual (this document)
UGREEN BT505 Package Contents and Dimensions
Diagram showing the receiver's ports, dimensions (2.62 x 2.03 x 0.78 inches), and included accessories.

3. Specifications

FeatureSpecification
ModelBT505
Wireless TypeBluetooth
Bluetooth Version6.0
Interface3.5 MM (AUX), 2RCA (RCA)
OriginMainland China
Frequency Band2400MHz-2483.5MHz
Max. RF Output Power4dBm (EIRP)
Transmission Distance10m/33ft (no blocking)
Bluetooth ProfileA2DP/AVRCP/HSP/HFP
Audio CodecsSBC/AAC/LDAC
Frequency Response20Hz-40kHz
Audio Port3.5mm/2RCA
Charging PortUSB-C
Battery TypePolymer lithium-ion battery
Battery Capacity300mAh 3.7V (1.11Wh)
Limited Charging Voltage5.25V
Charging TimeAbout 2 hours
Operating TimeAbout 15 hours
Product Dimensions2.62 x 2.03 x 0.78 inches (approx. 6.65 x 5.16 x 1.98 cm)
Package Dimensions14cm (L) x 11cm (W) x 3cm (H)
Package Weight0.14 kg

4. Setup

4.1 Charging the Device

Before first use, fully charge your UGREEN BT505 receiver. Connect the provided USB-C charging cable to the receiver's USB-C port and the other end to a 5V USB power adapter (not included).

  • Charging Indicator: The red charging indicator light is located above the power input.
  • Charging Status: Red light stays on during charging.
  • Fully Charged: The red light turns off when charging is complete.
  • Charging Time: Approximately 2 hours for a full charge.
UGREEN BT505 Charging and Playing Simultaneously
The receiver can be charged and used simultaneously with the included 1-meter USB-C cable.

4.2 Connecting to Audio System

The BT505 offers multiple connection options:

  • 3.5mm AUX Output: Use the provided 3.5mm audio cable to connect the receiver's AUX port to the 3.5mm AUX input of your speaker, amplifier, or car radio.
  • RCA Audio Output: Use an RCA cable (not included) to connect the receiver's RCA ports (red and white) to the corresponding RCA input ports on your amplifier or home stereo system.
UGREEN BT505 Multiple Connection Options
Diagram illustrating connection options via 3.5mm AUX OUT to RCA IN on an amplifier, and RCA OUT to AUX IN on a speaker.

4.3 First-Time Pairing

Follow these steps to pair your Bluetooth device with the BT505 receiver for the first time:

  1. Connect the Receiver: Ensure the BT505 is connected to your speaker or audio system via the 3.5mm or RCA port.
  2. Power On: Press and hold the Multi-function Button on the receiver for 3 seconds. The blue light will stay on for one second, and you will hear a "Power on" voice notification.
  3. Enter Pairing Mode: If it's the first power-on with no connection history, the receiver will automatically enter pairing mode. The red and blue lights will flash alternately, and you will hear "Pairing". If not, double-click the Multi-function Button to enter pairing mode.
  4. Enable Bluetooth on Your Device: Turn on Bluetooth on your smartphone, tablet, or computer.
  5. Search and Connect: Search for "UGREEN-BT505" in your device's Bluetooth settings and select it to pair.
  6. Pairing Successful: Once connected, the blue light will flash once every ten seconds, and you will hear "Bluetooth Conectado". You can now play music.
UGREEN BT505 First Pairing Steps
Visual guide for the first-time pairing process, including connecting to a speaker, pressing the multi-function button, searching for the device, and successful connection.

5. Operating Instructions

The UGREEN BT505 features a single Multi-function Button for various controls and an indicator light for status feedback.

5.1 Button Functions and Indicator Lights

FunctionHow to UseIndicator LightVoice NotificationNote
Power onPress the Multi-function Button for 3 SecondsBlue light stays on for one secondPower on
Power offPress the Multi-function Button for 3 SecondsRed light stays on for one secondPower off
Enter pairing modeDouble-click the Multi-function button when powered onRed and Blue Lights Flash AlternatelyPairing1. First power-on (no connection history), automatically enters pairing mode.
2. In no connection state, double-click the multi-function button to enter pairing mode (if not connected within 5 minutes, it will automatically turn off).
3. In connected dual-device mode, double-click to disconnect the device that is not playing music or the first device that was connected.
Pairing successful/Blue Light Flashes Once Every Ten SecondsBluetooth ConectadoWhen playing music, the indicator light will illuminate according to the audio codec in use. The indicator light will stay on for 3 seconds every 10 seconds. Indicator light status for different codecs: SBC: Cyan, AAC: Blue, LDAC: Green.
Play / PausePress the "Multi-function button" once while music is playing//
Power-on auto reconnectIf there is a connection history, the product will automatically reconnect within 16 seconds after powering on. If reconnection fails, it will enter pairing mode.Blue Light Flashes Once Every Five Seconds/
Restore factory settings (Clear ID records)Press the "Multi-function button" for ten seconds when power onBlue light stays on for five seconds/Automatically power on and enter pairing mode after completion
Low battery warning/Red light Flashes Once Every Ten Secondslow battery
Charging/Charging: Red light stays on
Fully charged: Red light turns off
/The red charging indicator light is located above the power input, different from the position of the product status indicator light.
UGREEN BT505 Function Table
Detailed table of functions, usage, indicator lights, and voice notifications for the BT505 receiver.

5.2 Dual Pairing

The BT505 supports connecting to two Bluetooth devices simultaneously. This allows you to switch between audio sources without re-pairing.

  • Connecting a Second Device: After connecting the first device, put the receiver back into pairing mode (double-click the Multi-function Button if not playing music, or if playing music, double-click to disconnect the current device and enter pairing mode). Then, connect the second device from its Bluetooth settings.
  • Switching Audio: When using one device to play music, you may need to pause the other device to ensure seamless audio playback from your desired source.
UGREEN BT505 Dual Pairing Feature
Image demonstrating the dual pairing capability, allowing two devices to be connected simultaneously.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the receiver. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Moisture: Keep the receiver away from water and high humidity to prevent damage.
  • Handle with Care: Avoid dropping or subjecting the device to strong impacts.

7. Troubleshooting

  • No Power: Ensure the device is charged. Connect it to a power source using the USB-C cable.
  • Cannot Pair:
    • Make sure the receiver is in pairing mode (red and blue lights flashing alternately).
    • Ensure your Bluetooth device is within the 10m/33ft transmission range.
    • Clear previous Bluetooth connections on your device and try again.
    • Perform a factory reset on the BT505 (see section 5.1).
  • No Audio Output:
    • Check if the receiver is correctly connected to your audio system via 3.5mm or RCA.
    • Verify that your audio system is set to the correct input source (AUX/RCA).
    • Adjust the volume on both your Bluetooth device and the connected audio system.
  • Poor Audio Quality/Disconnections:
    • Ensure there are no obstructions between your Bluetooth device and the receiver.
    • Move closer to the receiver to reduce interference.
    • Avoid placing the receiver near other wireless devices that might cause interference.
    • Check if your device is using a high-quality codec like LDAC for optimal performance.
  • Low Battery Warning: The red light will flash once every ten seconds, and you will hear a "low battery" voice notification. Recharge the device promptly.
UGREEN BT505 No Bluetooth Disconnection Worry
The BT505 is designed for stable connections, minimizing disconnection worries.

8. User Tips

Based on general user experiences with Bluetooth audio receivers, here are some tips for optimal use:

  • Placement Matters: For the best signal stability and range, place the receiver in an open area, free from obstructions and away from other electronic devices that might cause interference.
  • Codec Awareness: If your source device supports LDAC, ensure it's enabled in your device's Bluetooth settings for the highest audio fidelity. The receiver's indicator light will show green for LDAC.
  • Volume Control: It's often best to set the receiver's output volume (if adjustable via the connected audio system) to a moderate level and control the primary volume from your source device.
  • Firmware Updates: Periodically check the UGREEN official website for any available firmware updates for your BT505 model, which can improve performance and compatibility.

9. Warranty and Support

For detailed warranty information and customer support, please refer to the official UGREEN website or contact your local distributor. You can also find additional information and a downloadable PDF version of the user manual at the following link: UGREEN BT505 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.