1. Product Overview
The ANDELI TIG-250PL is a versatile AC/DC Pulse Cold Welding Machine designed for precision welding of various materials, including aluminum alloy, stainless steel, and molds. It features multiple welding modes: TIG, Pulse TIG, Cold Pulse, and Cold Welding, making it suitable for a wide range of applications from thin sheets to thicker plates. This machine supports dual voltage input (110V/220V) and offers intuitive digital controls for precise parameter adjustment.

Figure 1: Front view of the ANDELI TIG-250PL Welding Machine.

Figure 2: ANDELI TIG-250PL highlighting key features like AC/DC, TIG, and Cold welding capabilities.
2. Safety Instructions
- Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
- Ensure proper ventilation in the welding area to avoid inhaling fumes.
- Do not operate the machine in damp or wet conditions.
- Ensure the machine is properly grounded.
- Disconnect power before performing any maintenance or adjustments.
- Keep children and unauthorized personnel away from the welding area.
3. Setup
3.1 Unpacking and Inspection
Carefully remove the welding machine and all accessories from the packaging. Inspect for any signs of damage during transit. Report any damage to the supplier immediately.
3.2 Power Connection
The TIG-250PL supports both 110V and 220V power inputs. Use the appropriate power cable and conversion line if necessary. Ensure the power source matches the machine's requirements.

Figure 3: Back panel connections showing ON/OFF switch, Gas Tube Connector, and Power Cable input.
3.3 Gas Connection
Connect the gas tube to the 'GAS' connector on the back panel of the machine. Ensure a secure, leak-free connection. Pure argon gas is required for optimal cold welding performance.
3.4 Torch and Ground Clamp Connection
Connect the TIG torch (WP-26 or WP-9F cold torch) to the appropriate connector. Connect the ground clamp to the negative pole and the workpiece. Ensure all connections are tight and secure.

Figure 4: Front panel connections including Negative Pole, Positive Pole, Gas-power Connector, Remote Control, and Two-core Connector.
3.5 Portability
The machine is designed with a humanized handle for easy portability, allowing for convenient movement between workstations or up/down stairs.
4. Operating Instructions
4.1 Control Panel Overview
The control panel features a digital display for current and other parameters, an adjustment knob, and various function buttons. The layout is designed for intuitive control.

Figure 5: Detailed diagram of the TIG-250PL control panel, showing digital display, adjustment knob, and function buttons for AC/DC, 2T/4T, Cold, Save, Pulse, Pre-Flow, Start, Rise, Base, Frequency, Pulse Width, Time, Crater, Post-Flow, Clean PW, TIG, and Cold modes.
4.2 Welding Modes
- AC Cold Spot Welding: Ideal for thin aluminum welding. Select AC mode, then 'Cold' and 'TIG' functions.
- AC Argon Arc Pulse: For quick welding of aluminum plate. Select AC mode, then 'Pulse' and 'TIG' functions.
- DC Cold Spot Welding: Suitable for sheet welding with minimal discoloration and no need for sanding. Select DC mode, then 'Cold' and 'TIG' functions.
- DC Cold Welding Interval: For continuous spot welding rapidly on sheet metal. Select DC mode, then 'Cold' and switch to 'Interval' function.
- DC TIG Spot Welding: For thick plate welding. Select DC mode, then 'TIG' function.
- DC Argon Arc Pulse: For fast welding of thick plate. Select DC mode, then 'Pulse' and 'TIG' functions.
Video 1: Demonstration of various welding modes and features of the ANDELI TIG-250PL.
4.3 Cold Welding Function
The cold welding mode significantly reduces deformation and discoloration, resulting in silver-white welds on aluminum and stainless steel. This mode is particularly effective for delicate work.

Figure 6: Example of cold welding on a 0.8mm stainless steel plate, showing a clean, uniform weld.

Figure 7: Example of cold welding on a 0.5mm aluminum plate, demonstrating precise spot welds.
5. Maintenance
- Regular Cleaning: Keep the machine clean and free from dust and debris. Use compressed air to clear ventilation openings.
- Cable Inspection: Periodically inspect all cables, including power, ground, and torch cables, for damage or wear. Replace damaged cables immediately.
- Gas System Check: Ensure the gas lines and connectors are free from leaks.
- Torch Maintenance: Clean the torch nozzle and collet regularly. Replace worn-out tungsten electrodes.
- Storage: Store the machine in a dry, dust-free environment when not in use.
6. Troubleshooting
- No Power: Check the power cable connection, the ON/OFF switch, and the circuit breaker. Ensure the correct voltage is supplied.
- No Arc: Verify the ground clamp connection, check the tungsten electrode for proper installation and sharpness, and ensure gas flow.
- Poor Weld Quality: Adjust welding parameters (current, pulse frequency, etc.), check gas purity and flow rate, and ensure the workpiece is clean.
- Overheating: Allow the machine to cool down. Ensure ventilation openings are not blocked and the duty cycle is not exceeded.
7. Specifications

Figure 8: Detailed parameter table for the TIG-250PL ACDC welding machine.
| Feature | Specification |
|---|---|
| Model | TIG-250PL ACDC |
| Power Supply Voltage | 220V ±10% (also supports 110V with conversion) |
| Frequency | 50Hz |
| No-Load Voltage | 64V |
| Rated Input Power | 8.1KW |
| Rated Input Current | 37A |
| Effective Input Current | 20A |
| Welding Current Range | 10-200A |
| Power Factor | 0.76 |
| Efficiency | 60% |
| Load Voltage | 10.4-18V |
| Rated Duty Cycle @40°C (TIG) | 60% |
| Welding Thickness | 0.8-5mm (TIG), 0.4-1mm (Cold) |
| Protection Class | IP21S |
| Insulation Class | H |
| Cooling | AIR |
| Weight | 11 KG (Net) / 12.6 KG (Gross) |
| Dimensions (L×W×H) | 460×170×310mm |
| Material / Metal Processed | Carbon Steel, Stainless Steel, Aluminium alloy, Copper |

Figure 9: Dimensions of the TIG-250PL: 500mm (Length) x 238mm (Width) x 390mm (Height).
8. Warranty and Support
The ANDELI TIG-250PL welding machine comes with a 2-year warranty. For after-warranty service or any technical inquiries, please contact customer support.
Contact Information:
- WhatsApp: +86 15200511778
- Email: 19892006052@163.com
9. User Tips
- Always ensure your workpiece is thoroughly cleaned before welding to achieve the best results, especially with aluminum.
- When using cold welding mode, experiment with different spot weld times to find the optimal setting for your specific material thickness and desired finish.
- For precise control and minimal heat input, utilize the pulse functions for both AC and DC TIG welding.
- Keep a supply of various nozzle sizes and collets to adapt to different welding tasks and electrode sizes.