FGHGF X8S

Contents

FGHGF X8S Home Oil Press Machine Instruction Manual

Model: X8S

1. Introduction

Thank you for choosing the FGHGF X8S Home Oil Press Machine. This intelligent oil press is designed for efficient and convenient oil extraction from various seeds and nuts in your home. Made from durable stainless steel, it features digital temperature control and a powerful motor for continuous operation. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Safety Instructions

  • Always ensure the machine is placed on a stable, flat, and heat-resistant surface.
  • Keep hands and loose clothing away from moving parts during operation.
  • Do not touch the heating elements or press rod during or immediately after operation, as they will be hot. Use protective gloves if necessary.
  • Do not immerse the main unit in water or any other liquid.
  • Unplug the machine from the power outlet before cleaning or maintenance.
  • Keep out of reach of children.
  • Use only the specified voltage (110V or 220V) according to your model and region.

3. Product Overview

The FGHGF X8S oil press features an intelligent control panel and robust construction for ease of use and durability.

Control panel diagram of the FGHGF X8S oil press
Figure 1: Control Panel and Key Components

Control Panel Features:

  • Operating Instructions: Text display providing guidance.
  • Real-time Temperature Display (Current Temperature): Shows the current temperature inside the pressing chamber.
  • Set Temperature Display (Setting Temperature): Shows the user-defined target temperature.
  • Temperature Adjustment Buttons (Temp. ↑ / Temp. ↓): Used to increase or decrease the setting temperature.
  • Preheating Countdown Display (Count Down): Shows the remaining time for preheating in seconds.
  • Power Switch: Turns the machine on/off.
  • Press/Stop Switch: Starts or stops the oil pressing process.
  • Reverse Switch: Used to clear blockages by reversing the press rod.
Detail analysis of the oil press showing the hopper and filter screen
Figure 2: Hopper and Filter Screen

4. Specifications

The following table details the technical specifications of the FGHGF X8S oil press machine:

FeatureSpecification
ModelX8S
Machine Size380*152*320MM
Rated Power820W
Motor Power220W
Heater Power600W
Screw MaterialSS304 (Stainless Steel)
Screw Length210MM
Press Efficiency4-6KG/hour
Voltage110V/220V (depending on model)
Frequency50-60Hz
Net Weight6.6KG
Operation ModeDigital Temperature Control
Product parameters table for the oil press machine
Figure 3: Detailed Product Parameters

5. Setup

  1. Unpacking: Carefully remove all components from the packaging. Check for any damage.
  2. Placement: Place the main unit on a stable, level, and heat-resistant surface. Ensure there is adequate ventilation around the machine.
  3. Assemble Press Rod: Insert the press rod into the pressing chamber. Secure it with the snap ring design for quick installation. No tools are required for this step.
  4. Install Hopper: Place the stainless steel hopper securely on top of the machine.
  5. Position Oil Cup and Slag Collector: Place the oil collection cup under the oil outlet and the slag collector under the slag outlet.
  6. Power Connection: Connect the power cord to a grounded electrical outlet matching the machine's voltage (110V or 220V).
Snap ring design for quick installation of press chamber and press rod
Figure 4: Snap Ring Design for Easy Assembly

6. Operating Instructions

6.1 Preheating

  1. Turn on the main power switch (red switch).
  2. Set the desired temperature using the 'Temp. ↑' and 'Temp. ↓' buttons. Refer to the recommended temperatures for different materials below.
  3. The machine will start to preheat, and the 'Count Down' display will show the preheating time. Wait for the countdown to finish (approximately 8 minutes).

6.2 Oil Pressing

  1. Once preheating is complete, press the 'Press/Stop' switch (black switch) to start the motor.
  2. Slowly add your raw materials (seeds/nuts) into the hopper. Do not overload the hopper.
  3. The machine will begin to extract oil, which will flow into the oil collection cup. The remaining solid residue (slag) will exit through the slag outlet.
  4. Monitor the process. If the machine appears to be struggling or the oil flow significantly decreases, you may need to adjust the temperature or use the reverse function.
  5. After all materials have been processed, let the machine run for a few minutes to ensure all remaining oil is extracted.
  6. Press the 'Press/Stop' switch to stop the motor, then turn off the main power switch.
Table of recommended temperatures for different oil seeds
Figure 5: Intelligent Precise Temperature Control for Different Raw Materials
  • Spring Peanut: 200°C
  • Winter Peanut: 230°C
  • Raw Black Sesame: 180°C
  • Raw White Sesame: 200°C
  • Cooked Sesame: 220°C
  • Sunflower Seeds: 140°C
  • Perilla Seed: 120°C
  • Walnut Kernel: 180°C

6.4 Operation Demonstration Video

Video 1: Demonstration of the FGHGF X8S Oil Press Machine in operation, including setup, preheating, and oil extraction.

7. Maintenance

7.1 Cleaning

  1. Always unplug the machine and allow it to cool completely before cleaning.
  2. Disassemble the press rod and pressing chamber by removing the snap ring.
  3. Wash the hopper, press rod, pressing chamber, oil cup, and slag collector with warm soapy water. Rinse thoroughly and dry completely.
  4. Wipe the main unit with a damp cloth. Do not use abrasive cleaners or scourers.
  5. Ensure all parts are dry before reassembling or storing.

7.2 Storage

  • Store the machine in a cool, dry place, away from direct sunlight and moisture.
  • Keep the machine covered to prevent dust accumulation.

8. Troubleshooting

ProblemPossible CauseSolution
Machine does not turn onNo power, loose connection, faulty switchCheck power cord, outlet, and ensure both power switches are on.
Low oil yieldIncorrect temperature, raw material too wet/dry, insufficient preheatingAdjust temperature according to material, ensure materials are properly prepared (e.g., dried), allow full preheating.
Machine stops during operation or material is stuckOverload, material blockagePress the 'Reverse' switch to clear the blockage. If it persists, turn off, unplug, and clean the press rod and chamber. Reduce material input.
Unusual noiseLoose parts, foreign object, motor issueTurn off and unplug. Inspect for loose parts or foreign objects. If noise persists, contact support.

9. User Tips

  • For best results, ensure your seeds and nuts are clean and dry before pressing. Moisture content can significantly affect oil yield.
  • Experiment with different temperatures for various materials to find the optimal setting for your desired oil quality and yield.
  • Consider pre-roasting some seeds (like peanuts or sesame) for a richer flavor in the extracted oil, but adjust the pressing temperature accordingly.
  • Filter the extracted oil through a fine mesh or cheesecloth after pressing to remove any remaining sediment.

10. Warranty and Support

This FGHGF X8S Home Oil Press Machine comes with a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty validation.

© 2023 FGHGF. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.