Jansno X50

Contents

Jansno X50 Electric Bicycle User Manual

Model: X50

1. Introduction

Thank you for choosing the Jansno X50 Electric Bicycle. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read it thoroughly before your first ride and keep it for future reference. Ensure you wear appropriate protective equipment and comply with all local laws and regulations when operating the bicycle.

Video 1.1: Jansno X50 Electric Bicycle Overview and Features Demonstration

Jansno X50 Electric Bicycle Overview

Figure 1.1: Jansno X50 Electric Bicycle Overview

2. Assembly Instructions

Your Jansno X50 Electric Bicycle comes partially assembled. Follow these steps carefully to complete the assembly. It is recommended to have a second person assist with some steps.

2.1 Unpacking

  1. Carefully remove the bicycle and all components from the packaging.
  2. Inspect for any damage during transit. Contact support immediately if any parts are damaged or missing.
  3. Remove all protective packaging materials.

2.2 Front Wheel Installation

Front Wheel Assembly Diagram

Figure 2.1: Front Wheel Assembly Diagram

  1. Align the front wheel with the fork dropouts. Ensure the brake rotor slides correctly into the brake caliper.
  2. Insert the quick-release skewer or axle through the hub and secure it firmly.

2.3 Handlebar Installation

Handlebar Installation Guide

Figure 2.2: Handlebar Installation Guide

  1. Insert the handlebar stem into the fork's steerer tube.
  2. Adjust the handlebar to a comfortable height and angle.
  3. Tighten the stem bolts securely. Ensure the handlebar is straight relative to the front wheel.

2.4 Seat Post and Saddle Installation

Seat Post and Saddle Installation

Figure 2.3: Seat Post and Saddle Installation

  1. Insert the seat post into the frame's seat tube.
  2. Adjust the saddle height for comfortable pedaling.
  3. Secure the quick-release lever or seat post clamp firmly.

2.5 Pedal Attachment

Pedal Attachment Instructions

Figure 2.4: Pedal Attachment Instructions

  1. Identify the left (L) and right (R) pedals.
  2. Thread the right pedal (R) clockwise into the right crank arm.
  3. Thread the left pedal (L) counter-clockwise into the left crank arm.
  4. Tighten both pedals securely with a wrench.

2.6 Headlight Installation

Headlight Mounting

Figure 2.5: Headlight Mounting

  1. Mount the LED front light to the designated position on the handlebars or front fork.
  2. Connect the light's wiring to the bicycle's electrical system as indicated.

2.7 Rear Rack Assembly (if applicable)

Rear Rack Assembly

Figure 2.6: Rear Rack Assembly

  1. Attach the rear rack to the designated mounting points on the bicycle frame.
  2. Ensure all bolts are tightened securely.

2.8 Fender Installation (if applicable)

Fender Installation

Figure 2.7: Fender Installation

  1. Mount the front and rear fenders to their respective attachment points.
  2. Ensure they are properly aligned and do not interfere with the wheels.

2.9 Battery Installation

Battery Insertion and Removal

Figure 2.8: Battery Insertion and Removal

Battery Lock Mechanism

Figure 2.9: Battery Lock Mechanism

  1. Unlock the battery compartment using the provided key.
  2. Slide the 48V 14AH Lithium battery into its housing until it clicks into place.
  3. Lock the battery using the key to prevent theft and ensure it is secure during operation.

2.10 Initial Battery Charging

Battery Charger and Charging Port

Figure 2.10: Battery Charger and Charging Port

Before your first ride, fully charge the battery. Connect the charger to the charging port on the bike or directly to the removed battery, then plug it into a power outlet. Charging typically takes 6-8 hours.

2.11 Pre-Ride Safety Check

  • Check tire pressure.
  • Verify brakes are functioning correctly.
  • Ensure all bolts and quick releases are tightened.
  • Test lights and turn signals.

3. Operating Instructions

The Jansno X50 offers three distinct riding modes to suit your preference and terrain.

3.1 Powering On/Off and Display

LCD Display and Controls Overview

Figure 3.1: LCD Display and Controls Overview

Multifunction LCD Display

Figure 3.2: Multifunction LCD Display

To power on the bike, press and hold the power button on the LCD display. The display will show speed, battery level, assist mode, and other ride data. To power off, press and hold the power button again.

3.2 Riding Modes

  • 1. Pedal Assist Mode: The motor provides assistance as you pedal. Use the '+' and '-' buttons on the display to adjust the level of assistance (typically 1-5 levels). This mode extends your range and makes pedaling easier.
  • 2. Fully Electric Mode: Twist the throttle on the handlebar to engage the motor without pedaling. The amount of power delivered is proportional to how much you twist the throttle. In this mode, the battery range is approximately 20-40 miles.
  • 3. Pedal Mode: Ride the bicycle like a traditional bike, without any motor assistance. This mode is ideal for exercise or when the battery is depleted.

3.3 Gear Shifting

The Jansno X50 features a 7-speed transmission. Use the gear shifter on the handlebar to change gears according to terrain and desired pedaling effort. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.

3.4 Braking

The bike is equipped with front and rear mechanical disc brakes. Squeeze the brake levers on the handlebars to apply the brakes. Apply both brakes simultaneously for effective and safe stopping. Practice braking in a safe area before riding in traffic.

3.5 Lights and Turn Signals

Integrated Turn Signal Feature

Figure 3.3: Integrated Turn Signal Feature

Turn on the LED front light and rear light for visibility, especially during low-light conditions. Use the integrated turn signals to indicate your intentions to other road users.

4. Maintenance

Regular maintenance ensures the longevity and safe operation of your Jansno X50 Electric Bicycle.

4.1 Battery Care

  • Charging: Always use the original charger. Charge the battery in a well-ventilated area, away from flammable materials. Do not overcharge or leave charging unattended for extended periods.
  • Storage: If storing the bike for an extended period, charge the battery to 50-70% and store it in a cool, dry place. Recharge every 1-2 months to prevent deep discharge.
  • Cleaning: Keep battery terminals clean and dry.

4.2 Tires

  • Regularly check tire pressure (20" x 4.0" fat tires) and inflate to the recommended PSI found on the tire sidewall.
  • Inspect tires for wear, cuts, or punctures before each ride.

4.3 Brakes

  • Periodically check brake pads for wear and replace them when necessary.
  • Ensure brake levers have proper tension and the mechanical disc brakes engage smoothly.

4.4 Drivetrain

  • Keep the chain clean and lubricated for smooth gear changes and to prevent rust.
  • Inspect gears and derailleur for proper alignment and function.

4.5 Frame and Components

  • Clean the high carbon steel frame and other components with a damp cloth. Avoid using high-pressure washers directly on electrical components.
  • Regularly check all bolts, nuts, and fasteners for tightness.

5. Troubleshooting

Here are some common issues and their potential solutions:

  • Bike not powering on: Check if the battery is fully charged and properly installed/locked. Ensure all electrical connections are secure.
  • Motor not engaging: Verify that the battery is charged and the display is on. Check the assist level setting. Ensure the throttle is not stuck.
  • Reduced range: This can be due to low tire pressure, riding in higher assist modes, frequent use of the throttle, or cold weather. Ensure the battery is fully charged before each ride.
  • Brakes squealing: This might indicate dirty brake pads or rotors, or that the pads need to be bedded in. Clean with a specific brake cleaner or consult a bike mechanic.
  • Speed limit: The bike has a default speed limit. If you need to adjust or remove the speed limit, please contact customer service for specialized instructions.

6. Specifications

Detailed Bicycle Dimensions

Figure 6.1: Detailed Bicycle Dimensions

750W Brushless DC Motor

Figure 6.2: 750W Brushless DC Motor

E-bike Controller Unit

Figure 6.3: E-bike Controller Unit

Key Features and Components Diagram

Figure 6.4: Key Features and Components Diagram

FeatureSpecification
Model NumberX50
Motor Wattage48V, 750W Brushless DC
Battery Capacity48V 14AH Lithium battery
Frame MaterialHigh Carbon Steel
Fork MaterialAluminum alloy
Gears Transmission7 Speed
Throttle TypeTwist throttle
LightsLED Front Light & Rear Light, Turn Signal
Tire Size20" x 4.0" Fat Tires
Max Load120 kg
Range (Pure Electric)40 km (approx. 20-40 miles)
Range (Pedal Assist)50 km (approx. 20-40 miles)
Max Speed20 MPH (<25km/h)
Charging Time6-8 hours
Bike Size168cm x 69cm x 114cm
Gross Weight44 kg
CertificationCE
Rated Passenger CapacityOne Seat
Power SourceLithium battery
Voltage48V
FoldedNo
Wheel Size20"

7. User Tips

  • Safety First: Always wear a helmet and appropriate safety gear. Familiarize yourself with local traffic laws and regulations for electric bicycles.
  • Battery Optimization: For maximum battery life and range, try to use pedal assist mode more frequently than full electric mode. Avoid draining the battery completely.
  • Terrain Adaptation: The 20" x 4.0" fat tires are designed for various terrains including snow, sand, and gravel. Adjust your speed and riding style accordingly.
  • Regular Checks: Before each ride, quickly check tire pressure, brake function, and ensure all quick-release levers and bolts are tight.
  • Charging Environment: Always charge your battery in a safe, dry, and well-ventilated area, away from direct sunlight or extreme temperatures.

8. Warranty and Support

For warranty information, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase records handy when contacting support.

Disclaimer

Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.