1. Introduction
The MESTEK WM700B is a professional non-contact wood moisture meter designed for quick and accurate measurement of moisture content in various materials. Utilizing a spherical probe, it provides non-destructive measurements, making it ideal for woodworking, flooring installation, and general construction inspections. Its high-definition color display, self-calibration, and alarm functions ensure reliable and easy-to-interpret results.
2. Key Features
- Non-Destructive Measurement: Features a spherical probe for induction testing without damaging the material surface.
- Measuring Depth: Effective measurement depth of 20-40mm.
- High-Definition Color Display: Easy-to-read screen with backlight, displaying results clearly with color-coded indicators (DRY, RISK, WET).
- Self-Calibration: Ensures accuracy and reliability of measurements.
- Moisture Alarm Function: Allows setting critical alarm values (0-100) for different materials.
- Data Retention (HOLD): Freeze the current reading on the display.
- MAX/MIN Record: Records the maximum and minimum measured values during a test.
- Auto-Shutdown: Automatically powers off after 30 minutes of inactivity to conserve battery life.
- Low Power Reminder: Indicates when batteries need replacement.
- Wide Applications: Suitable for measuring moisture in softwood, hardwood, wet walls, ceilings, concrete, plaster, cork, and more.


3. Package Contents
Upon opening your MESTEK WM700B package, please verify that all items are present and in good condition:
- 1 x MESTEK WM700B Non-Contact Wood Moisture Meter
- 1 x User Manual
- 1 x Screwdriver (for battery compartment)

4. Specifications
| Parameter | Value |
|---|---|
| Product Name | Non-destructive moisture meter |
| Model Number | WM700B |
| Testing Area | Spherical probe |
| Measurement Range | 0-100 |
| Measured Depth | 20-40mm |
| Range of RISK Limit Value | 0-50 |
| Range of WET Limit Value | 51-100 |
| Automatic Shut-down | 30 minutes |
| Display Type | Color screen (DIGITAL) |
| Battery | 3 x 1.5V AAA (not included) |
| Operation Current | About 30mA |
| Operation Temperature | 0-40℃ |
| Operation Humidity | 0%-70% RH |
| Storage Environment | -10-50°C (5%-95% RH) |
| Weight | 210g |
| Size | 195 x 73 x 33mm |
Humidity Comparison Table
| Material | DRY | RISK | WET |
|---|---|---|---|
| Wood | <50 | 50-80 | >80 |
| Cement | <25 | 25-50 | >50 |
| Plaster | <30 | 30-60 | >60 |

5. Setup
5.1 Battery Installation
- Locate the battery compartment on the back of the device.
- Use the provided screwdriver to open the battery compartment cover.
- Insert three (3) 1.5V AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screwdriver.
5.2 Power On/Off
Press the Power button (usually marked with a power symbol) located on the front panel to turn the device on or off.
5.3 Self-Calibration
The MESTEK WM700B features a self-calibration function. The device will automatically calibrate upon startup or as needed to ensure accurate readings. No manual calibration steps are typically required for basic operation.

6. Operation
6.1 Taking a Measurement
- Turn on the device by pressing the Power button.
- Place the spherical probe directly onto the surface of the material you wish to measure. Ensure full contact between the probe and the material for accurate readings.
- The moisture reading will be displayed on the color screen. The device will automatically detect moisture up to a depth of 20-40mm.
- Observe the color analog bar and the DRY/RISK/WET indicators for a quick assessment of the moisture level.



6.2 Using HOLD Function
Press the HOLD button (often integrated with 'MEAS' or a dedicated button) to freeze the current measurement on the display. Press it again to release and resume live readings.
6.3 Recording MAX/MIN Values
During a measurement session, the device automatically tracks the maximum and minimum moisture values detected. These can be viewed on the display, often indicated by 'MAX' and 'MIN' labels.
6.4 Setting Moisture Alarm
The WM700B allows you to set critical alarm values. When the measured moisture exceeds the set threshold, the device will alert you. Refer to the 'Alarm value set' and 'Alarm Numerical Adaptation (+/-)' buttons on the device diagram (Figure 5.1) for control locations. The alarm critical value can be set for different materials based on the 0-100 range.

6.5 Interpreting Results
Use the Humidity Comparison Table in Section 4 (Specifications) as a general guide for interpreting the DRY, RISK, and WET indicators for common materials like wood, cement, and plaster. The color display also provides a visual analog bar for quick assessment.

7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Battery Replacement: When the low power reminder appears on the display, replace all three AAA batteries promptly to ensure accurate operation.
- Probe Care: Keep the spherical probe clean and free from debris to maintain optimal contact and measurement accuracy.
8. Troubleshooting
- Device does not power on: Check if batteries are installed correctly and have sufficient charge. Replace if necessary.
- Inconsistent readings: Ensure the spherical probe is making full and consistent contact with the material surface. Avoid measuring over metal objects or highly conductive surfaces.
- Display issues: If the display is dim or flickering, replace the batteries. If the issue persists, contact support.
- Alarm not triggering: Verify that the alarm critical values are set correctly for the material being tested.
9. User Tips
- For best results, take multiple readings in different spots on the material and average them.
- Always ensure the probe is clean before taking measurements.
- Be aware of the measurement depth (20-40mm) and consider the material thickness when interpreting results.
- The auto-shutdown feature helps save battery, but remember to manually turn off the device if you finish using it sooner.

10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.