Introduction
The UGREEN BT505 AUX Bluetooth Receiver is designed to upgrade your audio experience by adding Bluetooth 6.0 connectivity to your existing wired audio systems. It supports high-resolution lossless audio codecs like LDAC, AAC, and SBC, delivering extraordinary clarity and Hi-Fi sound quality. With its low-latency Bluetooth 6.0 chip and a long 15-hour battery life, this compact device provides a stable and high-quality wireless audio connection for various devices, including car speakers, home stereo systems, and PCs.

Package Contents
Please check the package for the following items:
- 1 x UGREEN BT505 Bluetooth Receiver
- 1 x USB-C Charging Cable (1 meter / 3 feet)
- 1 x 3.5mm Audio Cable (1 meter / 3 feet)
- 1 x User Manual


Product Overview
The UGREEN BT505 features a compact design with essential ports and a multi-function button for easy operation.

Components:
- Multi-function Button: For power on/off, pairing, play/pause, and factory reset.
- USB-C Charging Port: For charging the device.
- RCA Audio Output (L/R): For connecting to audio systems with RCA inputs.
- 3.5mm Audio Output (AUX): For connecting to audio systems with 3.5mm AUX inputs.
- LED Light: Indicates device status (power, pairing, connection, battery).
Setup
Connecting to an Audio System:
The UGREEN BT505 offers versatile connection options to integrate with your existing audio equipment.

- Choose your connection type:
- For devices with a 3.5mm AUX input (e.g., most speakers, car radios), use the included 3.5mm audio cable to connect the BT505's 3.5mm AUX output to your device's AUX input.
- For devices with RCA inputs (e.g., amplifiers, home stereo systems), connect the BT505's RCA audio outputs to your device's RCA inputs using an appropriate RCA cable (not included).
- Ensure your audio system is powered on and set to the correct input source (AUX or RCA).
First-Time Bluetooth Pairing:

- Connect the UGREEN BT505 to your speaker or audio system via the 3.5mm or RCA port as described above.
- Press and hold the Multi-function Button on the BT505 for 3 seconds to power it on and enter pairing mode. The red and blue lights will flash alternately, and you will hear a "Pairing" voice notification.
- On your smartphone, tablet, or computer, enable Bluetooth and search for available devices.
- Select "UGREEN-BT505" from the list of devices to pair.
- Once successfully connected, the blue light will flash once every ten seconds, and you will hear a "Bluetooth Connected" voice notification. You can now play audio wirelessly.
Operating Instructions
Power On/Off:
- Power On: Press and hold the Multi-function Button for 3 seconds. The blue light will stay on for one second, and you will hear "Power on".
- Power Off: Press and hold the Multi-function Button for 3 seconds. The red light will stay on for one second, and you will hear "Power off".
Play/Pause:
- While music is playing, press the Multi-function Button once to play or pause the audio.
Dual Pairing (Connecting Two Devices Simultaneously):
The UGREEN BT505 supports connecting to two Bluetooth devices at the same time, allowing you to switch between them.

- Ensure the first device is already paired and connected to the BT505.
- Double-click the Multi-function Button on the BT505 to enter pairing mode again. The red and blue lights will flash alternately.
- On your second device, enable Bluetooth and search for "UGREEN-BT505" to pair.
- Once the second device is connected, the blue light will flash once every ten seconds.
- Note: When using one of the devices to play music, you may need to pause the other device to ensure seamless audio playback from the desired source.
Automatic Reconnection:
If there is a connection history, the BT505 will automatically attempt to reconnect to the last paired device within 16 seconds after powering on. If reconnection fails, it will enter pairing mode.
Restore Factory Settings (Clear ID Records):
To clear all paired device records and restore the receiver to its factory default settings:
- When the device is powered on, press and hold the Multi-function Button for ten seconds. The blue light will stay on for five seconds, and the device will automatically power off and then enter pairing mode upon completion.
Indicator Lights and Voice Notifications
The LED indicator light and voice notifications provide important status updates for the UGREEN BT505.


| Function | How to Use | Indicator Light | Voice Notification | Note |
|---|---|---|---|---|
| Power on | Press the Multi-function Button for 3 Seconds | The blue light stays on for one second | Power on | |
| Power off | Press the Multi-function Button for 3 Seconds | The red light stays on for one second | Power off | |
| Enter pairing mode | Double-click the "Multi-function button" when powered on | Red and Blue Lights Flash Alternately | Pairing | 1. First power-on (no connection history), automatically enters pairing mode. 2. In no connection state, double-click the multi-function button to enter pairing mode (if not connected within 5 minutes in pairing mode, it will automatically turn off). 3. In the connected dual-device mode, double-click to disconnect the device that is not playing music or the first device that was connected. |
| Pairing successful | / | The Blue Light Flashes Once Every Ten Seconds | Bluetooth Connected | When the phone is playing music, the indicator light will turn on according to the codec used. The indicator light status for different codecs is as follows: SBC: Cyan, AAC: Blue, LDAC: Green. |
| Play / Pause | Press the "Multi-function button" once while music is playing | / | / | |
| Power-on auto reconnect | / | The Blue Light Flashes Once Every Five Seconds | / | If there is a connection history, the product will automatically reconnect within 16 seconds after powering on. If the reconnection fails, it will enter pairing mode. |
| Restore factory settings (Clear ID records) | Press the "Multi-function button" for ten seconds when power on | The blue light stays on for five seconds | / | Automatically power on and enter pairing mode after completion |
| Low battery warning | / | The red Light Flashes Once Every Ten Seconds | low battery | |
| Charging | / | Charging: Red light stays on Fully charged: Red light turns off | / | The red charging indicator light is located above the power input, different from the position of the product status indicator light. |
Charging
The UGREEN BT505 is equipped with a built-in rechargeable battery, offering approximately 15 hours of operating time on a full charge. It can also be used while charging.

- Connect the included USB-C charging cable to the USB-C charging port on the BT505 and to a standard USB power adapter (5V, not included).
- The charging time is approximately 2 hours.
- During charging, the red charging indicator light (located above the power input) will stay on. It will turn off once the device is fully charged.
- A low battery warning will be indicated by the red light flashing once every ten seconds, accompanied by a "low battery" voice notification.
Troubleshooting
- Device not powering on: Ensure the device is charged. Press and hold the Multi-function Button for 3 seconds.
- Cannot enter pairing mode: If the device has a connection history, it might try to auto-reconnect. Double-click the Multi-function Button to force it into pairing mode (red and blue lights flash alternately). If it was previously connected to two devices, double-click to disconnect the inactive device.
- No audio after connecting:
- Check if the BT505 is correctly connected to your audio system (3.5mm or RCA).
- Ensure your audio system is set to the correct input source.
- Verify the volume levels on both your source device and the audio system.
- If using dual pairing, ensure the active device is playing music and the other device is paused.
- Frequent disconnections:
- Ensure the BT505 is within the 10m/33ft transmission distance from your Bluetooth source device, with no major obstructions.
- Try restoring factory settings to clear old connection records (press and hold Multi-function Button for 10 seconds when powered on).
- Poor audio quality:
- Ensure your source device supports LDAC, AAC, or SBC codecs for optimal quality.
- Reduce interference by moving away from other wireless devices.

Specifications
| Feature | Detail |
|---|---|
| Brand Name | UGREEN |
| Model | BT505 |
| Wireless Type | Bluetooth |
| Bluetooth Version | 6.0 |
| Frequency Band | 2400MHz-2483.5MHz |
| Max. RF Output Power | 4dBm (EIRP) |
| Transmission Distance | 10m/33ft (no blocking) |
| Bluetooth Profile | A2DP/AVRCP/HSP/HFP |
| Audio Codecs | SBC/AAC/LDAC |
| Frequency Response | 20Hz-40kHz |
| Audio Ports | 3.5mm / 2RCA |
| Charging Port | USB-C |
| Battery Type | Polymer lithium-ion battery |
| Battery Capacity | 300mAh 3.7V (1.11Wh) |
| Limited Charging Voltage | 5.25V |
| Charging Time | About 2 hours |
| Operating Time | About 15 hours |
| Dimensions (L x W x H) | 2.62 inch x 2.03 inch x 0.78 inch (66.5mm x 51.5mm x 19.8mm) |
User Tips
- Cable Compatibility: While the device supports both 3.5mm and 2RCA audio outputs, it typically comes with a 3.5mm audio cable. If your audio system primarily uses RCA inputs, you may need to acquire an RCA to RCA cable separately.
- Simultaneous Charging and Playback: The UGREEN BT505 can be used while it is charging, ensuring uninterrupted music playback even during long sessions.
- Managing Dual Connections: When two devices are paired, remember to pause playback on one device before starting playback on the other to avoid audio conflicts.
- Optimal Audio Quality: For the best audio experience, ensure your source device supports the LDAC codec, which offers the highest bitrate among the supported codecs (up to 990 kbps).


Warranty and Support
For warranty information, technical support, or any inquiries regarding your UGREEN BT505 AUX Bluetooth Receiver, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt for warranty claims.