1. Introduction
The feyree Portable EV Charger Adapter is designed to facilitate charging of electric vehicles equipped with a GB/T charging port from charging stations that provide a Type 2 (IEC 62196-2) output. This adapter ensures compatibility and safe power transfer between different charging standards, offering a convenient solution for EV owners.
2. Safety Information
- Always ensure the adapter and charging cables are free from damage before use. Do not use if any part is cracked, frayed, or exposed.
- Keep the adapter dry. Avoid using it in heavy rain or wet conditions unless explicitly designed for such environments (IP65 rating indicates protection against water jets, but submersion should be avoided).
- Ensure all connections are fully seated and locked before initiating charging. Loose connections can cause overheating or electrical hazards.
- Do not attempt to open, modify, or repair the adapter. Refer to qualified personnel for service.
- Keep out of reach of children.
- Operate within the specified voltage and current ratings to prevent damage to the adapter, charging station, or vehicle.
3. Package Contents
The package typically includes:
- 1 x feyree Portable EV Charger Adapter (Type 2 Male Plug to GB/T Socket)
4. Specifications
| Feature | Specification |
|---|---|
| Charger Side Connection | IEC-62196-2 Type 2 Male Plug |
| Vehicle Side Connection | GB/T Type Socket |
| Rated Current | 16A / 32A AC (Single Phase & Three Phase options available) |
| Operation Voltage | 110V ~ 240V |
| Power (W) | 3.5kW / 7kW / 11kW / 22kW (depending on model) |
| Operating Temperature | -30°C ~ +55°C |
| IP Rating | IP65 |
| Cable Length | 0.5m |
| Pin Material | Copper Alloy, Silver Plating |
| Dimensions (L x W x H) | Approx. 28cm x 28cm x 8cm |
| Weight | Approx. 1.6kg |
| Flame Retardant | V0 Level (UL94) |
| Resistance | UV-light, water, oil, moisture resistant |
| Hazardous Elements | RoHS2.0/SVHC compliant |
5. Setup
Follow these steps to correctly connect your feyree Portable EV Charger Adapter:
- Inspect the Adapter: Before each use, visually inspect the adapter for any signs of damage, wear, or foreign objects in the connectors.
- Connect to Charging Station: Take the Type 2 male plug end of the adapter and firmly insert it into the Type 2 socket of the EV charging station. Ensure it clicks into place securely.
- Connect to Electric Vehicle: Take the GB/T socket end of the adapter and firmly insert it into the GB/T charging port of your electric vehicle. Ensure it is fully seated.
- Verify Connection: Double-check both connections to ensure they are secure and there is no wobbling.
6. Operating Instructions
Once the adapter is securely connected to both the charging station and your electric vehicle:
- Initiate Charging: Follow the instructions of the charging station or your vehicle to start the charging process. This may involve swiping a card, using an app, or pressing a button on the charging station.
- Monitor Charging: Observe the charging status indicators on your vehicle's dashboard or the charging station.
- Complete Charging: Once charging is complete, or if you need to stop charging, follow the charging station's or vehicle's procedure to safely terminate the session.
- Disconnect Safely: Disconnect the GB/T socket from your vehicle first, then disconnect the Type 2 male plug from the charging station. Always handle the plugs by their insulated grips.
7. Maintenance
- Cleaning: Wipe the adapter with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure connectors are free of dust and debris.
- Storage: Store the adapter in a dry, cool place, away from direct sunlight and extreme temperatures. Use the protective caps for the connectors when not in use to prevent dust and moisture ingress.
- Inspection: Regularly inspect the cable and connectors for any signs of damage, corrosion, or wear. If any damage is found, discontinue use immediately and contact support.
8. Troubleshooting
- Adapter not charging:
- Ensure both ends of the adapter are securely connected. Check if the charging station is active and providing power. Verify that your vehicle's charging port is functioning correctly. Check for any error messages on the charging station or vehicle dashboard.
- Slow charging speed:
- Confirm that the charging station is delivering the expected power output. Ensure the adapter model matches the desired power (e.g., 22kW adapter for faster charging if supported by both station and vehicle). Environmental factors like extreme temperatures can also affect charging efficiency.
- Connection error message:
- Disconnect and reconnect the adapter firmly. Check the connectors for any obstructions or damage. Restart the charging session from the station or vehicle.
9. User Tips
- Always store the adapter with its protective caps on to prevent dust and moisture from entering the connectors.
- When disconnecting, ensure the charging session is properly terminated to avoid potential arcing or damage to the connectors.
- Consider the power rating of your adapter and ensure it is compatible with both your vehicle's maximum charging capacity and the charging station's output for optimal performance.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the original purchase documentation or contact the feyree Official Store directly. Keep your proof of purchase for any warranty claims.
