DRAGINO BH01-LB/LS

Contents

Dragino BH01-LB/LS BLE to LoRaWAN Hub User Manual

Model: BH01-LB/LS

1. Product Overview

The Dragino BH01-LB/LS BLE to LoRaWAN Hub is an edge communication node device designed for Internet of Things (IoT) applications. It acts as a bridge, enabling Bluetooth Low Energy (BLE) devices to communicate over a LoRaWAN network.

The hub periodically scans and collects data from nearby Bluetooth temperature and humidity sensors (such as BCN02, iBeacons, or compatible third-party BLE sensors). This collected data is then transmitted over long distances to a cloud platform using the LoRaWAN protocol, facilitating seamless integration of Bluetooth devices into low-power wide area networks.

This device is particularly suitable for applications requiring environmental monitoring and asset tracking, such as cold chain logistics, smart factory monitoring, warehouse monitoring, and greenhouse monitoring. It combines the flexibility of Bluetooth for local data acquisition with the wide coverage and low power consumption of LoRaWAN for long-range data transmission, significantly reducing IoT deployment costs compared to Wi-Fi solutions.

Front view of Dragino BH01-LB/LS LoRaWAN Hub with antenna, showing model number and certifications.

Figure 1: Front View of BH01-LB/LS Hub

Back view of Dragino BH01-LB/LS LoRaWAN Hub with antenna and two indicator lights.

Figure 2: Back View of BH01-LB/LS Hub

Diagram showing various application scenarios for the BH01-LB/LS Hub, including Cold Chain Logistics, Smart Factory Monitoring, Warehouse Monitoring, and Greenhouse Monitoring.

Figure 3: BH01-LB/LS Application Scenarios

2. Features

  • LoRaWAN 1.0.3 Class A compliant.
  • Supports various frequency bands: CN470, EU433, KR920, US915, EU868, AS923, AU915, IN865.
  • Ultra-low power consumption for extended operation.
  • Efficient data collection: Bluetooth tags monitor environmental parameters in real-time and upload data to the Hub via BLE protocol.
  • Combines BLE’s short-range precision with LoRaWAN’s long-range transmission capabilities.
  • Ability to monitor battery levels of connected devices.
  • Supports Bluetooth v5.1 for connectivity.
  • Remote configuration via mobile phone using the built-in BLE module.
  • Supports wireless Over-The-Air (OTA) firmware updates via private LoRa protocol for easy maintenance.
  • Uplinks data periodically to the cloud platform.
  • Supports downlink commands to change device configurations remotely.
  • Power options:
    • BH01-LB: Powered by an 8500mAh Li/SOCl2 battery.
    • BH01-LS: Powered by a solar panel with a 3000mAh Li-ion battery.

3. Setup and Installation

This section outlines the general steps for setting up your Dragino BH01-LB/LS Hub and integrating it with Bluetooth sensor tags.

3.1 Powering the Hub

  • BH01-LB Model: Ensure the internal 8500mAh Li/SOCl2 battery is correctly installed and charged if applicable. This model is designed for long-term use with its high-capacity battery.
  • BH01-LS Model: Position the device to ensure adequate exposure to sunlight for the solar panel to charge the internal 3000mAh Li-ion battery. Verify the battery is connected.

3.2 LoRaWAN Network Registration

Before the hub can transmit data, it must be registered with a LoRaWAN network server. Refer to your LoRaWAN network provider's documentation for specific registration procedures. You will typically need the device's DevEUI, AppEUI (or JoinEUI), and AppKey.

3.3 Configuring Bluetooth Sensor Tags

The BH01-LB/LS Hub collects data from compatible Bluetooth sensor tags. These tags often require initial configuration for broadcast frequency, transmit power, and sampling frequency. Use the recommended configuration application:

  • Configuration App: nRF Connect (available for Android / iOS).
  • Follow the instructions provided with your specific Bluetooth sensor tag (e.g., DR-TAH02, DR-ES01) for pairing and configuration via the nRF Connect app.
Image of Dragino DR-TAH02 Bluetooth Temperature Tag, a small white rectangular device.

Figure 4: DR-TAH02 Bluetooth Temperature Tag

Image of Dragino DR-ES01 Bluetooth Temperature and Humidity Sensor, a small white rectangular device with vents.

Figure 5: DR-ES01 Bluetooth Temperature and Humidity Sensor

3.4 Hub Configuration

The BH01-LB/LS Hub itself can be configured remotely via a mobile phone using its built-in BLE module. This allows for adjustments to its operational parameters without physical access. Specific configuration details will be provided in the device's advanced user guide or via the manufacturer's software tools.

4. Operation

Once configured and powered, the BH01-LB/LS Hub operates autonomously to collect and transmit data.

  • Data Collection: The hub continuously scans for nearby Bluetooth sensor tags within its range. It collects environmental data (e.g., temperature, humidity) and other parameters broadcast by these tags.
  • Data Transmission (Uplink): Collected data is aggregated and transmitted periodically to the LoRaWAN network server. The frequency of uplink transmissions can be configured during setup.
  • Remote Configuration (Downlink): The hub can receive downlink commands from the LoRaWAN network server to update its configuration parameters, such as scanning intervals, reporting intervals, or other operational settings.
  • Battery Monitoring: The hub monitors its own battery level (and potentially the battery levels of connected BLE tags, if supported by the tag's broadcast data) and can report this information via LoRaWAN uplinks.

5. Maintenance

  • Firmware Updates: The BH01-LB/LS supports wireless Over-The-Air (OTA) firmware updates via a private LoRa protocol. Regularly check the manufacturer's website for new firmware versions to ensure optimal performance and access to new features.
  • Battery Management:
    • BH01-LB: The 8500mAh Li/SOCl2 battery is designed for long life. Monitor the battery level via LoRaWAN uplinks. When replacement is necessary, ensure to use a compatible battery type.
    • BH01-LS: Ensure the solar panel is clean and unobstructed to maximize charging efficiency. Periodically check the solar panel and battery connections.
  • Environmental Protection: The DR-TAH02 sensor tag has an IP67 waterproof level, and the DR-ES01 sensor has an IP65 waterproof level. While the hub itself is designed for outdoor use, ensure it is installed in a location that minimizes exposure to extreme weather conditions beyond its specified operating limits.
  • Cleaning: Keep the device and its antenna clean from dust and debris to ensure proper operation and signal integrity. Use a soft, dry cloth for cleaning.

6. Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, please contact technical support.

  • No Data Transmission:
    • Verify the hub is powered on and its battery level is sufficient.
    • Check LoRaWAN network coverage in the installation area.
    • Ensure the hub is correctly registered with the LoRaWAN network server (DevEUI, AppEUI/JoinEUI, AppKey).
    • Confirm that Bluetooth sensor tags are powered on, broadcasting data, and within range of the hub.
    • Check the configuration of both the hub and the sensor tags for correct broadcast/scanning intervals.
  • Inaccurate Sensor Readings:
    • Ensure sensor tags are placed in appropriate locations, away from direct heat sources, cold drafts, or excessive moisture unless designed for such conditions.
    • Verify the sensor tag's calibration if applicable.
    • Check the sensor tag's battery level. Low battery can sometimes affect accuracy.
  • Remote Configuration Issues:
    • Ensure your mobile device's Bluetooth is enabled and within range of the hub for BLE configuration.
    • For LoRaWAN downlink configuration, verify network connectivity and correct payload formats.

7. Specifications

7.1 BH01-LB/LS Hub Specifications

FeatureDescription
ModelBH01-LB / BH01-LS
LoRaWAN ProtocolLoRaWAN 1.0.3 Class A
Supported BandsCN470, EU433, KR920, US915, EU868, AS923, AU915, IN865
Bluetooth VersionBluetooth v5.1
Firmware UpdateWireless OTA via private LoRa protocol
Power Supply (BH01-LB)8500mAh Li/SOCl2 battery
Power Supply (BH01-LS)Solar panel + 3000mAh Li-ion battery
CertificationsCE, FCC
OriginMainland China

7.2 DR-TAH02 Bluetooth Temperature Tag Specifications

FeatureDescription
Bluetooth VersionBluetooth LE 5.1 protocol
Shell MaterialPET composite plastic bag (heat sealed)
Temperature Range-40°C ~ +85°C, ±0.3°C
Waterproof LevelIP67
Battery Capacity600mAh
Working Temperature-40°C ~ +60°C
Battery SpecificationCR2450
Data Storage512 records
Battery Life3 years (varies with transmission power and broadcast frequency)
Transmit Power-19.5dBm ~ +2.5dBm (configurable)
Broadcast Frequency500ms (configurable)
Sampling Frequency5min/time (configurable)
Broadcast Power Consumption22uA (varies with transmission power and broadcast frequency)
Broadcast ModeCustom Sensor broadcast
Broadcast Distance100m (varies with transmission power setting)
Configuration AppnRF Connect (Android / iOS)

7.3 DR-ES01 Bluetooth Temperature and Humidity Sensor Specifications

FeatureDescription
Bluetooth VersionBluetooth LE 5.3 protocol
Casing MaterialPC material
Temperature Range0°C ~ +85°C, ±0.2°C
Humidity Range0~100%RH, ±2%RH
Waterproof LevelIP65
Battery Capacity1100mAh
Working Temperature0°C ~ +85°C
Battery SpecificationAAA LR03 x2
Battery Life3 years (varies with transmission power and broadcast frequency)
Transmit Power-20dBm ~ +4dBm (configurable)
Broadcast Frequency1000ms (configurable)
Broadcast Power Consumption34uA (varies with transmission power and broadcast frequency)
Broadcast ModeCustom Sensor broadcast
Broadcast Distance100m (varies with transmission power setting)
Configuration AppnRF Connect (Android / iOS)
Supported SystemAndroid 4.3 / iOS 7.0 and above

8. User Tips

Based on general usage patterns for similar devices, consider the following tips:

  • Optimal Placement: For best performance, place the BH01-LB/LS Hub in a central location relative to your Bluetooth sensor tags to maximize BLE signal reception. For the BH01-LS model, ensure the solar panel receives direct sunlight for most of the day.
  • Network Planning: Before deployment, conduct a site survey to ensure adequate LoRaWAN network coverage and to identify potential signal obstructions.
  • Battery Life Optimization: Adjust the broadcast frequency and transmit power settings of your Bluetooth sensor tags to balance data update rates with battery longevity. Higher frequencies and power consume more battery.
  • Regular Monitoring: Utilize the battery monitoring feature to proactively replace or recharge batteries in sensor tags and the hub (BH01-LB model) to prevent data loss.

9. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official Dragino website or contact your vendor directly. Ensure you have your product model and serial number available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.