Introduction
The GL-X3000 (Spitz AX) is a high-performance cellular gateway 5G router designed to provide reliable and high-speed internet connectivity for various environments, including homes, RVs, and remote areas. Featuring Wi-Fi 6 technology, dual-SIM capabilities, and advanced VPN functionalities, this router ensures a stable and secure network experience. It supports both NSA and SA 5G networks, along with 4G LTE and 3G, and is certified for use with AT&T and T-Mobile.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your GL-X3000 router to help you maximize its features and performance.
Setup Guide
1. Package Contents
Before you begin, ensure all components are present:
- GL-X3000 (Spitz AX) 5G Router
- Power Adapter
- Detachable Antennas (6 units)
- Free 10GB SIM Card (DATA ONLY, NO TEXT, NO TALK)
2. Hardware Installation
Attach Antennas: Carefully screw the six detachable antennas into their respective ports on the router. Ensure they are securely fastened but do not overtighten.

Image: GL-X3000 (Spitz AX) 5G Router with antennas attached.
Insert SIM Card(s): The router features dual-SIM slots. Open the SIM card slot cover. Insert your primary SIM card (or the included 10GB SIM card) into SIM slot 1. If desired, insert a secondary SIM card into SIM slot 2 for failover or load-balancing. The device also supports physical eSIM, which needs to be purchased separately.

Image: Close-up view of SIM card insertion into the GL-X3000 (Spitz AX) router.
Connect Power: Connect the power adapter to the router's power input port and then plug it into a power outlet. The router will automatically power on.
3. Initial Power-On and Indicator Lights
Upon powering on, observe the LED indicators on the router. They will typically cycle through various states before settling, indicating successful boot-up and network connection. Refer to the router's front panel for specific LED meanings (e.g., Power, Wi-Fi, LAN, 5G/4G signal strength).
Operating Instructions
1. Connecting Devices
The GL-X3000 supports Wi-Fi 6, allowing for high-speed connections for up to 70 devices simultaneously. Locate the Wi-Fi network name (SSID) and password printed on the bottom label of your router. Connect your devices (smartphones, tablets, laptops, etc.) to this Wi-Fi network.

Image: The GL-X3000 (Spitz AX) 5G Router providing connectivity to multiple devices.
2. Accessing the Admin Panel
To configure advanced settings, access the router's web-based Admin Panel. Open a web browser and enter the default IP address (usually 192.168.8.1) into the address bar. Log in using the default username and password (also found on the router's label). The Admin Panel provides a user-friendly, no-code interface for customization.
3. Dual-SIM and Network Management
The GL-X3000 offers dual-SIM functionality for enhanced reliability:
- Automatic Failover: Configure the router to automatically switch to the secondary SIM card if the primary network connection is lost or unstable.
- ISP Selection: Manually select your preferred ISP connection via the Admin Panel.
- Load-Balancing: Distribute bandwidth across multiple connection methods (e.g., two SIM cards, Ethernet, Repeater, Tethering) by custom proportion to optimize performance.
4. VPN Tunnelling and Remote Access
The router comes with OpenVPN and WireGuard pre-installed. You can configure these VPN services through the Admin Panel to encrypt all network traffic, ensuring secure connections, especially when using public Wi-Fi. The router supports over 30 VPN services.
5. OpenWrt Customization
The Spitz AX runs on proprietary firmware based on OpenWrt (v21.02). This allows for extensive customization through more than 5,000 ready-made plug-ins. Explore the plug-in repository within the Admin Panel to add advanced features and tailor the router's functionality to your specific needs.
6. Multi-WAN Technology
Utilize multiple connection methods simultaneously for reliable and uninterrupted internet access:
- Ethernet: Connect to a wired internet source.
- Repeater: Extend an existing Wi-Fi network.
- Cellular: Use the inserted SIM cards for 5G/4G/3G connectivity.
- Tethering: Share internet from a smartphone via USB.
Configure failover priorities in the Admin Panel to ensure seamless switching between these WAN sources.
Maintenance
- Firmware Updates: Regularly check for and install firmware updates via the Admin Panel to ensure optimal performance, security, and access to new features.
- Cleaning: Keep the router clean and free from dust. Use a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Antenna Care: Ensure antennas are always securely attached. If using external wired dome antennas, ensure proper connection and placement for best signal reception.
- Ventilation: Ensure the router is placed in a well-ventilated area to prevent overheating.
Troubleshooting
Common Issues and Solutions:
- No Internet Connection:
- Check if the SIM card is correctly inserted and activated.
- Verify cellular signal strength via the router's LED indicators or Admin Panel.
- Ensure your cellular data plan is active and has available data.
- If using multi-WAN, check the status of all connected WAN sources.
- Restart the router and your connected devices.
- Slow Internet Speeds:
- Real-world speeds can vary based on network configuration, cellular coverage, and environmental factors.
- Check cellular signal strength; a weak signal can significantly reduce speeds.
- Ensure no background applications are consuming excessive bandwidth.
- Try repositioning the router for better signal reception.
- If using load-balancing, adjust the proportion settings in the Admin Panel.
- SIM Card Not Detected:
- Remove and reinsert the SIM card(s) to ensure proper seating.
- Verify the SIM card is not damaged.
- Check the Admin Panel for SIM card status and error messages.
- Cannot Access Admin Panel:
- Ensure your device is connected to the router's Wi-Fi or via an Ethernet cable.
- Verify you are using the correct IP address (default
192.168.8.1). - Clear your browser's cache or try a different browser.
- Temporarily disable any VPN connections on your device.
Specifications
| Feature | Detail |
|---|---|
| Model | GL-X3000 (Spitz AX) |
| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
| Wi-Fi Speeds | Up to 574Mbps (2.4GHz) + 2402Mbps (5GHz) |
| Wi-Fi Technology | MU-MIMO |
| Cellular Network | 5G (NSA/SA), 4G LTE, 3G |
| Carrier Certification | AT&T & T-Mobile IoT Device Certified |
| SIM Support | Dual-SIM slots, Physical eSIM support (purchased separately) |
| Antennas | 6 Detachable Antennas |
| VPN Protocols | OpenVPN, WireGuard (pre-installed) |
| Max. VPN Speed | 150 Mbps (OpenVPN); 300 Mbps (WireGuard) |
| Firmware | OpenWrt v21.02 |
| WAN Connectivity | Ethernet, Repeater, Cellular, Tethering |
| Installation Method | Assembly |
| Color | White |
| Package Dimensions (L x W x H) | 25cm x 21cm x 23cm |
| Package Weight | 0.9 kg |
Supported Bands

Image: Exploded view of the GL-X3000 (Spitz AX) router, detailing the 5G NR Module and supported network bands.
| Technology | Mode | Bands |
|---|---|---|
| 5G NR | NSA | n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 |
| SA | n1/ 2/ 3/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 20/ 25/ 26/ 28/ 29/ 30/ 38/ 40/ 41/ 48/ 66/ 70/ 71/ 75/ 76/ 77/ 78/ 79 | |
| LTE | LTE-FDD | B1/ 2/ 3/ 4/ 5/ 7/ 8/ 12/ 13/ 14/ 18/ 19/ 20/ 25/ 26/ 28/ 29/ 30/ 32/ 66/ 71 |
| LTE-TDD | B34/ 38/ 39/ 40/ 41/ 42/ 43/ 48 | |
| LAA | B46 | |
| UMTS | WCDMA | B1/ 2/ 4/ 5/ 8/ 19 |
| GNSS | GPS/ GLONASS/ BDS/ Galileo |
User Tips
- Optimize with Dual-SIM: If you travel or operate in areas with varying cellular coverage, utilize the dual-SIM feature to switch between carriers for the best signal and speed. Configure automatic failover for seamless internet.
- Explore OpenWrt Plugins: The OpenWrt firmware offers extensive customization. Dive into the Admin Panel to explore and install plugins that can enhance security, add specific network functionalities, or optimize performance for your unique setup.
- Consider External Antennas for Remote Areas: For improved signal stability and strength in very remote locations, consider connecting a wired dome antenna to the router. This can significantly boost your internet experience where cellular signals are weak.
- Leverage Multi-WAN: Use the multi-WAN capabilities (Ethernet, Repeater, Cellular, Tethering) to create a highly resilient internet connection. Prioritize connections based on reliability or speed to ensure you're always online.
Warranty and Support
The GL-X3000 (Spitz AX) router is covered by the manufacturer's standard warranty. Please refer to the official GL.iNet website or your purchase documentation for specific warranty terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact GL.iNet customer support through their official channels. Ensure you have your product model and serial number ready when contacting support.