1. Introduction
This wireless keypad is designed to manage your alarm system quickly and easily. It allows you to arm and disarm your alarm system using codes or RFID tags. The keypad features multiple user codes, a doorbell button, breathing backlight, and a user-friendly design.
Important Note: This anti-theft keypad must be used with a compatible alarm host (e.g., CP10, CP10 Pro, CP10 Pro loRa) and does not function as a stand-alone alarm system.
2. Main Features
- Stylish appearance with breathing backlight
- Wireless connection
- Supports multiple user codes
- Built-in 3.7V/1500mAh lithium battery
- Power input: USB-C 5V 1A
- Low voltage reminder
- Anti-tampering alarm
- Doorbell button
- Supports up to 10 RFID tags
- Microwave proximity sensor for automatic wake-up (within 1 meter)
- Light sensor for automatic backlight adjustment
3. Product Overview
Familiarize yourself with the components and layout of your CPVAN Wireless Keypad.
3.1 Keypad Layout
| Component | Description |
|---|---|
| Number Keys (0-9) | Used for entering codes. |
| Away Button (Shield icon) | Arms the system in Away mode. |
| Home Button (House icon) | Arms the system in Home mode. |
| Disarm Button (Broken shield icon) | Disarms the system. |
| RFID Touch Area | Area for scanning RFID tags to arm/disarm. |
| Doorbell Button (Bell icon) | Triggers the doorbell function on the alarm host. |
| Cancel/Return Button (X icon) | Cancels current input or returns to previous menu. |
| Confirm Button (Checkmark icon) | Confirms input or selection. |
| Power Indicator | Indicates power status (charging, low battery, active, standby). |
| Microwave Proximity Sensor | Automatically wakes up the keypad when approached. |
| Light Sensor | Adjusts backlight automatically (do not cover). |
3.2 Rear Components
- Anti-dismantling Switch: Triggers an alarm if the keypad is tampered with or removed from its mounting.
- USB-C 5V 1A: Charging port for the internal battery.
- Battery Switch: Must be turned ON before use.
- Screw Holes: For mounting the hanging plate.
4. Installation
Follow these steps to install your CPVAN Wireless Keypad:
- Fix the Hanging Plate: Secure the hanging plate to the desired wall location using screws.
- Install the Keypad: Mount the keypad onto the fixed hanging plate.
- Install Anti-tamper Screws: Install the anti-tamper screws at the bottom of the keypad to prevent unauthorized removal.
5. Setup and Configuration
5.1 Pairing with Alarm System
- Power On: Turn on the battery switch located on the back of the keypad.
- Enter Pairing State: On your alarm host, navigate to the 'Keypad' section and enter the pairing state.
- Send Signal: Press the Doorbell button (
) on the keypad to send a signal to the alarm host.
Video: Keypad Pairing and Operation Demonstration
This video demonstrates the pairing process of the keypad with an alarm panel and basic arm/disarm functions.
5.2 Pairing / Deleting RFID Tags
| Action | Steps |
|---|---|
| Pairing RFID Tags |
|
| Deleting RFID Tags |
|
5.3 Setting Admin / User Codes
Default Admin Code: 9876
Default User 1 Code: 1234
User 2-3 are not enabled by default.
| Code Type | Steps to Set |
|---|---|
| Setting Admin Code |
|
| Setting User 1 Code |
|
| Setting User 2 Code |
|
| Setting User 3 Code |
|
5.4 Deleting User Codes
| Code Type | Steps to Delete |
|---|---|
| Deleting User 1 Code | Enter Admin code, then press 4, then Cancel/Return ( ) twice to delete User 1. |
| Deleting User 2 Code | Enter Admin code, then press 5, then Cancel/Return ( ) twice to delete User 2. |
| Deleting User 3 Code | Enter Admin code, then press 6, then Cancel/Return ( ) twice to delete User 3. |
5.5 Microwave Proximity Sensor
| Action | Steps |
|---|---|
| Turn On | Enter Admin code, then press 7, then Confirm ( ). |
| Turn Off | Enter Admin code, then press 8, then Confirm ( ). |
The microwave proximity sensor automatically wakes up the keypad when a human body approaches within about 1 meter.
6. Operating Instructions
6.1 Arm/Disarm System
| Action | Steps | Input Method |
|---|---|---|
| Away Arm | Press the Away button ( ). |
Enter Admin / User code or Touch RFID Tag |
| Home Arm | Press the Home button ( ). |
|
| Disarm | Press the Disarm button ( ). |
6.2 Doorbell Function
Press the Doorbell button (
) to make the alarm host sound the doorbell ringtone.
Notice:
- Two short beeps: Error / Failure
- One long beep: Correct / Successful
7. Status Indicators
The Power Indicator LED provides visual feedback on the keypad's status:
| Power Indicator Color | Indicator Status | Keypad Status |
|---|---|---|
| Red | Solid | Charging |
| Flashing | Low Battery | |
| Green | Solid | Activated/Fully charged |
| Flashing | Standby |
8. Maintenance
8.1 Charging the Battery
The keypad has a built-in 3.7V/1500mAh lithium battery. When the power indicator flashes red, it indicates a low battery and requires charging. Connect a USB-C 5V 1A power adapter to the USB-C port on the keypad.
8.2 Resetting the Keypad
To perform a factory reset on the keypad:
- Remove the power supply (unplug USB-C cable).
- Turn OFF the battery switch on the back of the keypad.
- Press and hold the Cancel/Return button (
). - While holding the button, turn ON the battery switch.
- Continue holding the button for 10 seconds until the keypad emits a long beep. This indicates a successful reset.
9. Troubleshooting
- Keypad not responding: Ensure the battery switch is ON and the battery is charged. Check the power indicator status.
- Pairing failure:
- Ensure the alarm host is in pairing mode.
- Verify the keypad is powered on.
- Try resetting the keypad and attempting pairing again.
- Code setting failure: If the setting fails, the code you entered twice may be inconsistent. Please try again, ensuring the new code is 4-8 digits.
- Exiting setup/menu: To exit or return to the previous level during setup, press the Cancel/Return button (
). - Doorbell function not working: Ensure the keypad is properly paired with the alarm host. Check for two short beeps (error) or one long beep (successful) after pressing the doorbell button.
10. User Tips
- Compatibility: This keypad is designed to work with CPVAN alarm systems (CP10, CP10 Pro, CP10 Pro loRa). Compatibility with other brands like PGST or Wolf-guard is not guaranteed and should be verified with the alarm system manufacturer.
- Obfuscated Code Entry: When entering your code, you can input up to 12 digits. The system will recognize the code as correct as long as it contains the consecutive correct digits of your actual code. This adds an extra layer of security.
- Backlight Adjustment: The keypad features a light sensor for automatic backlight adjustment. Ensure the light sensor area is not covered for optimal performance.
- RFID Tag Convenience: Utilize the RFID tags for quick and easy arming/disarming, especially when entering or exiting your property.
11. Specifications
11.1 433MHz Version
- Power supply: DC5V 1A
- Built-in battery: 3.7V/1500mAh lithium battery
- Working current: <10mA
- Standby current: <100uA
- Wireless: 433MHz, eV1527
- Receiving distance: 100 meters (open space)
- Working temperature: -10°C~50°C
- Relative humidity: <95% (no condensation)
11.2 LoRa Version
- Power supply: DC5V 1A
- Built-in battery: 3.7V/1500mAh lithium battery
- Working current: <10mA
- Standby current: <100uA
- Wireless: LoRa
- Receiving distance: 500 meters (open space)
- Working temperature: -10°C~50°C
- Relative humidity: <95% (no condensation)
11.3 RFID Tag
- RFID protocol: 125KHz, 4100/4200
- RFID Tag capacity: Up to 10 cards can be added
12. Warranty and Support
For technical support, troubleshooting assistance, or warranty inquiries, please contact CPVAN customer service through your purchase platform or the official CPVAN website. Please have your product model (K30) and purchase details ready when contacting support.
A user manual in PDF format is available for download: CPVAN Wireless Keypad User Manual (PDF).
13. Compliance Information
This device complies with relevant standards for CE, FCC, UKCA, and RoHS. Please dispose of electronic waste responsibly.