Introduction
Thank you for choosing the STONEGO 1080P HD Dual Dash Cam. This device is designed to provide reliable recording of your journeys, enhancing safety and providing crucial evidence in case of incidents. This manual will guide you through the setup, operation, and maintenance of your dash cam.
Image: Front and rear view of the dashcam, showing the main unit and included 32GB memory card.
Safety Warnings
- Warning: Do not operate or adjust the dash cam while driving, as it may distract you and cause accidents.
- Warning: Avoid exposing the device to extreme temperatures (below -20°C or above 75°C) to prevent damage to internal components.
- Warning: Ensure the dash cam is securely mounted to avoid detachment during collisions, which may result in injury or device damage.
Package Contents
Please check the package for the following items:
- 1080P Dual Dash Cam x 1
- User Manual x 1 (Refer to the included PDF for detailed instructions: User Manual PDF)
- 32GB Memory Card x 1
- Car Charger x 1
- Mounting Bracket x 1
- Adhesive Pad x 1
Image: Visual representation of all items included in the package.
Setup
- Attach Mounting Bracket: Securely attach the mounting bracket to the dash cam. The bracket is maneuverable for optimal positioning.
- Remove Protective Film: Carefully tear off any protective film from the camera lenses and screen.
- Insert TF Card: Insert the compatible TF card (up to 64GB) into the designated slot on the dash cam. Ensure it clicks into place.
- Mount the Dash Cam: Use the adhesive pad to securely mount the dash cam on your car's windshield. Position it to ensure a clear view for both front and interior cameras.
- Connect Power: Connect the dash cam to your car's power supply via the included mini USB cable and car charger. Route the cable neatly to avoid obstruction.
- Adjust Camera Angles: Adjust the angle of the front and interior cameras for optimal coverage. The interior lens can rotate 180 degrees.
Video: Demonstrates attaching the mounting bracket, removing protective film, rotating the lens, powering on, and navigating playback controls.
Image: Shows the dashcam installed in a car, demonstrating the installation effect.
Image: Wiring diagram showing the dashcam installed on the windshield and connected to the car's power outlet via a 3.5m/11.5ft cable.
Operating Instructions
- Power On/Off: Once connected to power, the device will automatically turn on and begin loop recording. To manually power on/off, press and hold the power button.
- Loop Recording: The dash cam automatically overwrites the oldest files to save new videos, ensuring continuous recording without needing to manually clear space.
- G-Sensor: The built-in G-Sensor detects sudden shocks and locks the recorded footage, preventing important files from being overwritten during an incident.
- Screen Switching: The 3.16-inch IPS screen supports 5 kinds of display modes, including Front, Front+Rear, and Back views. Use the controls to switch between views.
- Video Playback:
- Press the OK button to pause recording.
- Press the 'M' key to switch to playback mode.
- Use the up or down buttons to select the desired playback video.
- Press the OK button to confirm and start playback.
Image: Illustrates the 5 different screen display modes available on the dashcam.
Image: Shows simultaneous recording from the front and interior cameras, highlighting the 150° front shot and 180° rotatable interior lens.
Maintenance
- TF Card Formatting: Format the TF card regularly (e.g., once a month) to ensure smooth operation and prevent recording errors.
- Lens Cleaning: Keep the camera lenses clean for clear video quality. Use a soft, lint-free cloth.
- Avoid Disassembly: Do not attempt to disassemble the device. Contact customer support for any repairs.
- Humidity: Avoid using the dash cam in environments with high humidity (above RH95%) to prevent damage.
Troubleshooting
- Q: Why is my dash cam not turning on?
- A: Check the power connection and ensure the car's outlet is functional. If the issue persists, try a different USB cable.
- Q: How do I prevent footage from being overwritten?
- A: Enable the G-Sensor feature to lock important files during incidents, or manually save footage using the emergency button.
User Tips
- For continuous recording when your car is parked and turned off, a dedicated hardware kit (often sold separately) is required to enable the 24-hour Parking Monitor feature.
- Always use the provided car charger and mini USB cable for optimal power delivery and to avoid compatibility issues.
Image: Graphics illustrating the 24-hour Parking Monitor and Loop Recording features.
Specifications
| Feature | Specification |
|---|---|
| Display Size | 3.16 inch IPS screen |
| Chipset Manufacturer | Generalplus |
| Frames Per Second | 30 FPS |
| Number Of Lenses | 2 (Front, Interior) |
| Monitor Area | FRONT, REAR |
| Max External Memory | 64GB (TF Card) |
| Power Interface | DC 5V/1.5A |
| USB Interface | Mini USB |
| Video Format | MOV |
| Picture Format | JPEG |
| Image Sensors | 1/4" color Sensor |
| Effective Pixels | 1296P, 1080P, 720P |
| Lens Angle | 150° |
| Operating Temperature | -20°C to +75°C |
| Working Humidity | RH95% |
| Working Power (DCV) | 12V |
| Battery | 150mAh built-in |
| Current Frequency | 50 / 60Hz |
| Supported Languages | Russian, Japanese, French, Italian, German, English, Chinese (simplified), Chinese (Traditional), Korean, Spanish, Portuguese |
Image: Detailed dimensions of the dashcam unit.
Image: Highlights key features like 1080P Full HD, 3.16 Inch IPS Display, 150° Wide Angle, and Night Vision.
Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual PDF provided with your product or contact STONEGO customer service. Keep your purchase receipt for warranty claims.
