Hobbywing X11 Plus Motor Power

Contents

Hobbywing X11 Plus Motor Power System User Manual

For 14S Plant Protection Drone UAV Motor with 4314 Folding Propeller

1. Introduction

The Hobbywing X11 Plus Power System is a highly integrated power system specifically designed for agricultural plant protection UAVs. It features a powerful motor, efficient propeller, and intelligent ESC, providing strong thrust, high efficiency, and excellent reliability. This manual provides detailed instructions for installation, operation, and maintenance to ensure safe and optimal performance of your drone's propulsion system.

2. Product Overview

Video: Customer Application Case demonstrating the Hobbywing All-in-one Drone Thrust System (X13 Combo, 9L Centrifugal Pump, 30L Flexible Impeller Pump) in action, showing high flow spraying with droplet particle sizes of 35-500 microns. Supports water aqua, miscible oil, and flowable solutions.

Hobbywing X11 Plus Power System with 4314 Propeller

Image: The Hobbywing X11 Plus Power System, featuring the motor and 4314 folding propeller, designed for agricultural UAVs.

Key Features:

  • Low Voltage, High Power: Optimized for efficiency with carbon-plastic 4314 propellers, recommending a take-off weight of 15-18kg per rotor.
  • Hobbywing X11 Plus Motor with Propeller

    Image: Close-up of the X11 Plus motor with a folding propeller.

  • Dual Throttle Parallel: Provides precise throttle control and more stable flight, even in conditions without RTK (Real-Time Kinematic) GPS for 'fixed' flight.
  • Diagram illustrating Dual Throttle Parallel control

    Image: Diagram showing the benefits of Dual Throttle Parallel control, comparing CAN and PWM signals for stable flight paths.

  • Good Heat Dissipation: The motor's heat dissipation structure has been upgraded for more powerful active heat dissipation, offering improved performance compared to the X11-18S under similar working conditions.
  • Diagram of X11 Plus motor heat dissipation

    Image: Cutaway diagram illustrating the enhanced heat dissipation structure of the X11 Plus motor.

  • Fault Storage: Features a built-in fault storage function that allows users to download and view data via a DATALINK data box, aiding in quickly locating and analyzing UAV faults.
  • Multiple Intelligent Protection V2.0: Offers enhanced protection against overcurrent, stalled motors, and other working conditions. Fault processing time is shortened to within 270ms, ensuring rapid handling of emergencies for flight safety.
  • IPX6 Protection: The Electronic Speed Controller (ESC) is fully sealed and protected, significantly improving its anti-corrosion and anti-rust capabilities.
  • Diagram showing IPX6 protection for the ESC

    Image: Diagram highlighting the IPX6 protection features of the ESC, ensuring durability in harsh environments.

  • Higher Tension, Higher Efficiency: Surpasses the X11-18S in all aspects by meeting low voltage and high power requirements. The maximum thrust has increased to 37kg with 4314 carbon plastic propellers, and system efficiency is improved by 5% under the same conditions, allowing for longer flight times.
  • Graph showing thrust and efficiency improvements

    Image: Graph illustrating the increase in thrust to 37kg and 5% efficiency improvement compared to previous models.

  • FOC (Field-Oriented Control): Enables precise and linear throttle control for smooth and responsive operation.
  • Diagram illustrating FOC for precise throttle control

    Image: Diagram showing the concept of FOC for precise and linear throttle control, indicating temperature decrease and efficiency increase.

3. Specifications

Technical Parameters

Category Parameter Value
MotorStator SizeØ111*18
KV85KV
Motor SizeØ120.1*49.2
ESCInput SignalPWM (3.3V-5V), CAN
Throttle Pulse Width1050-1950 µs
Working Frequency50-500Hz
Max Allowable Voltage61V
Continuous Current (< 60°C)50A
Max Current (< 60°C)150A
PropellerDiameter x Thread Pitch43*14 inch
Total Weight (inc. adapter)405g
Single Propeller Weight146g
GeneralMax Thrust37.5 kg
Recommended Battery12-14S LiPo
Recommended Takeoff Weight15-18kg/rotor (44V, Sea Level)
Power Train Arc Tube Diameter50mm
Operating Temperature-20~50°C
Ingress ProtectionIPX6
Recommended DroneFor drones with approx. 30L water loadup

Load Performance (54V, 14S LiPo, HW 43*14" Carbon Plastic Propeller)

Throttle (%) Thrust (g) Current (A) Power (W) RPM (r/min) Efficiency (g/w)
40%1006518.91024.317589.8
46%1317028.21525.620098.6
48%1400030.91670.720718.4
50%1504034.31859.221478.1
52%1620038.42078.422287.8
54%1730542.42295.723037.5
56%1787044.52410.123417.4
58%1875547.92593.823987.2
60%1981052.12819.924667.0
70%2577578.44243.328186.1
80%30060100.35422.630435.5
100%37435144.57810.034024.8

Note: The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.

Dimensions (CAD)

XRotar X11 Plus CAD drawing with dimensions

Image: Detailed CAD drawing of the XRotar X11 Plus, showing various dimensions and mounting points.

4. Setup & Installation

Proper installation is crucial for the safe and efficient operation of the X11 Plus Power System. Follow these steps carefully:

  1. Motor Mounting: Securely attach the motor to the drone arm using appropriate screws. Ensure the motor is aligned correctly according to your drone's design. Refer to the CAD drawing in the Specifications section for mounting dimensions.
  2. Propeller Installation:
    • Identify CW (Clockwise) and CCW (Counter-Clockwise) propellers. These are typically marked on the propeller itself.
    • Mount the corresponding propeller to the motor shaft. Ensure the propeller is tightly secured with the provided fasteners.
    • Verify that the propeller rotates freely without obstruction and is not loose.
  3. Wiring: Connect the ESC to the motor and the flight controller. Ensure correct polarity and secure connections. Double-check all wiring to prevent short circuits or incorrect operation.
  4. LED Indicator: Connect the LED indicator to the designated port on the ESC. This indicator provides visual feedback on system status and alarms.
  5. Pre-flight Checks: Before every flight, verify all connections are secure, propellers are correctly oriented and tightened, and there is no visible damage to any component.

5. Operation

Follow these guidelines for safe and effective operation of your X11 Plus powered drone:

  1. Pre-flight Inspection: Before connecting the battery, perform a thorough visual inspection of the entire drone, including the power system. Check for any loose parts, damaged wires, or propeller issues.
  2. System Start-up:
    • Connect the fully charged battery to the ESC.
    • Listen for the ESC initialization tones. These tones confirm the system is powering on and performing self-checks.
    • Arm the drone using your remote controller according to your flight controller's instructions.
  3. Flight Control:
    • Gradually increase the throttle to lift off. The FOC technology ensures precise and linear throttle response.
    • Monitor the drone's behavior and flight stability.
    • Utilize the CAN/PWM control for precise spraying operations, ensuring stable flight paths even in challenging conditions.
  4. Landing:
    • Slowly reduce the throttle to initiate landing.
    • Once landed, disarm the drone immediately.
    • Disconnect the battery to power down the system.

Protective Functions:

  • Start-up Protection: Prevents the motor from starting if the throttle is not at its minimum position.
  • Over-current Protection: Reduces power or cuts off output if the current exceeds safe limits.
  • Over-temperature Protection: Reduces power or cuts off output if the ESC temperature becomes too high.
  • Throttle Signal Loss Protection: Stops the motor if the throttle signal from the flight controller is lost.
  • Voltage Protection: Implements a low voltage cut-off to protect the battery from over-discharge.
  • Stalled Motor Protection: Detects if the motor stalls and cuts power to prevent damage.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Hobbywing X11 Plus Power System:

  1. Regular Cleaning: Clean the motor, ESC, and propellers after each use, especially after spraying operations. Use a soft brush or compressed air to remove dust, debris, and chemical residues to prevent corrosion and buildup.
  2. Component Inspection: Periodically check for loose screws, damaged wires, or worn-out propeller blades. Pay close attention to the motor bearings and propeller hubs. Replace any damaged parts immediately to avoid further issues.
  3. Firmware Updates: Check the official Hobbywing website regularly for any available firmware updates for the ESC. Keeping the firmware up-to-date ensures optimal performance, compatibility, and access to the latest features and bug fixes.
  4. Fault Data Review: If any operational issues or alarms occur, utilize the DATALINK box to download and analyze the fault data from the ESC. This data can help identify the root cause of problems and guide troubleshooting efforts.

7. Troubleshooting

If you encounter issues with your X11 Plus Power System, refer to the following common troubleshooting steps and alarm descriptions:

General Troubleshooting:

  • No Power/No Response: Check battery connection, ensure battery is charged, and verify all wiring connections to the ESC and flight controller.
  • Motor Not Spinning: Ensure the drone is armed, throttle is above minimum, and there are no obstructions to the propeller. Check for alarm tones.
  • Unstable Flight: Verify propellers are correctly installed (CW/CCW) and balanced. Check for any physical damage to motors or propellers.

Alarming Tone Description:

The ESC provides audible alarm tones to indicate specific issues. Listen for these tones during operation or startup for diagnostics:

Alarm Tone Description
Beep-Beep-Throttle signal abnormal
Beep-Beep-Beep-Motor start-up failure
Beep-Beep-Beep-Beep-Over-current protection triggered
Long Beep (continuous)Over-temperature protection triggered
Short Beeps (rapid succession)Low voltage protection triggered
Continuous short beeps with pausesStalled motor detected

For more detailed fault analysis, connect the DATALINK box to download and review the fault logs from the ESC.

8. User Tips

  • Use Genuine Parts: Always use genuine Hobbywing motors, ESCs, and propellers for optimal performance, reliability, and safety.
  • Propeller Balancing: Ensure all propellers are properly balanced. Unbalanced propellers can cause excessive vibrations, leading to reduced flight stability, increased power consumption, and premature wear on motor bearings.
  • Battery Management: Always use recommended 12-14S LiPo batteries. Monitor battery voltage and health regularly. Avoid over-discharging batteries, as this can significantly reduce their lifespan.
  • Environmental Awareness: While the system has IPX6 protection, avoid operating in extreme weather conditions or environments that could exceed the system's capabilities.
  • Regular Inspections: Implement a routine pre-flight and post-flight inspection checklist to catch potential issues early.

9. Warranty & Support

For warranty information, technical support, or service inquiries, please contact your original seller or an authorized Hobbywing distributor. Keep your purchase receipt as proof of purchase.

© 2024 Hobbywing. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.