K&F CONCEPT 15.7"/40cm Softbox

Contents

K&F CONCEPT 15.7"/40cm Softbox Instruction Manual

Model: 15.7"/40cm Softbox

Brand: K&F CONCEPT

1. Introduction

Thank you for choosing the K&F CONCEPT 15.7"/40cm Parabolic Hexadecagon Softbox. This manual provides clear and easy-to-understand instructions for the proper use and care of your softbox. This softbox is designed to provide high-quality, soft light for various photography and videography applications.

Product Features:

  • Perfect Fit: Specifically designed for K&F CONCEPT PL-60B COB lights, requiring no additional adapter. Also compatible with NANLITE Forza 60 II/60B II/60C/60CR/150/150B, FS-60B, and FC 60B/120B fill lights.
  • Lightweight & Portable: Weighing only 380g, it folds down to 36x14x14cm for easy transport in a backpack or suitcase.
  • High-Quality Materials: Constructed from premium nylon fabric with a high-reflective coating for enhanced light diffusion. Features a high-transmittance diffuser and a heat-resistant PVC mount.
  • Easy Setup & Quick Release: Integrated design allows for setup in seconds by pulling up the 8 ribs. Disassembly is quick by lifting each rib and pushing the mount to the right.
  • Versatile Accessories: Includes a diffuser and honeycomb grid for customizable lighting effects.

Package Contents:

  • Octagonal Softbox x 1
  • Honeycomb Grid x 1
  • Diffuser x 1
  • Carrying Bag x 1
  • User's Manual x 1
Package contents including softbox, honeycomb grid, diffuser, carrying bag, and user manual.
Figure 1: Items included in the package.

For a detailed PDF version of the user manual, please refer to the official document: User Manual (PDF).

2. Setup Instructions

2.1 Opening the Softbox

  1. Lift up each of the 8 support bars (ribs) in turn until the clips securely fix the bar in place. You can lift them sequentially or diagonally.
  2. Once the softbox is open, unfold the white diffuser cloth. Press it evenly against the felt on the inner edge of the softbox to secure it.
  3. If desired, unfold the honeycomb grid. Attach it to the inner edge of the softbox using the Velcro fasteners on the grid.
Diagram showing how to lift the support bars to open the softbox.
Figure 2: Opening the softbox by lifting the support bars.
Diagram illustrating both opening and closing steps for the softbox.
Figure 3: Quick Release Design - Opening and Closing.

2.2 Attaching to a Light Source

Align the mini Bowens mount of the softbox with the corresponding mount on your compatible COB light (e.g., K&F CONCEPT PL-60B, NANLITE Forza series). Push and twist until it locks securely into place.

K&F CONCEPT softbox mounted on a Nanlite FC-60B light.
Figure 4: Softbox mounted on a compatible light.
Video 1: Demonstration of softbox assembly and disassembly.

3. Operating the Softbox

3.1 Light Diffusion

The primary function of the softbox is to diffuse and soften the light from your COB light, creating a more even and flattering illumination. The included white diffuser cloth helps to spread the light uniformly and reduce harsh shadows.

Comparison of light with and without diffuser, showing softer light with diffuser.
Figure 5: Effect of diffusion with the softbox.

3.2 Using the Honeycomb Grid

The honeycomb grid (also known as an egg crate) can be attached to the front of the softbox to control the spread of light. It narrows the beam angle, directing light more precisely and reducing light spill, which is useful for accentuating specific areas or creating dramatic lighting effects.

Comparison of light with and without honeycomb grid, showing more focused light with grid.
Figure 6: Effect of using the honeycomb grid.
Four images showing lighting effects: without softbox, without diffuser, with diffuser, and with diffuser and grid.
Figure 7: Adjustable lighting effects with diffuser and grid.

4. Disassembly and Storage

4.1 Disassembling the Softbox

  1. If attached, remove the honeycomb grid and diffuser cloth.
  2. To collapse the softbox, lift each support rod (rib) and simultaneously push the buckle on the mount to the right (in the direction of the arrow shown in diagrams) to release it. Repeat for all 8 ribs.

4.2 Storage

Once collapsed, fold the softbox neatly. Place the softbox, diffuser, honeycomb grid, and any other accessories into the provided carrying bag for compact storage and protection.

Folded softbox components and carrying bag.
Figure 8: Softbox components ready for storage.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the exterior of the softbox. For the diffuser and grid, gentle spot cleaning with a damp cloth and mild soap is acceptable, but ensure they are completely dry before storage.
  • Storage: Always store the softbox and its accessories in the provided carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid excessive force when opening or closing the softbox to prevent damage to the support rods or mounting mechanism.

6. Troubleshooting

6.1 Softbox Not Opening/Closing Smoothly

  • Ensure that each support bar is lifted or released individually and correctly. Refer to the 'Setup' and 'Disassembly' sections for proper technique.
  • Check for any obstructions or bent rods. If a rod is bent, gentle manipulation might correct it, but avoid excessive force.

6.2 Light Not Diffused Evenly

  • Ensure the diffuser cloth is unfolded completely and pressed evenly against the felt inside the softbox.
  • Verify that the light source is centered within the softbox.

6.3 Compatibility Issues

  • This softbox features a mini Bowens mount. It is specifically designed for K&F CONCEPT PL-60B series lights and compatible NANLITE models (Forza 60 II/60B II/60C/60CR/150/150B, FS-60B, FC 60B/120B).
  • If your light source is not listed, it may not be compatible. Do not attempt to force the mount, as this could damage both the softbox and your light.

7. Specifications

FeatureSpecification
Model15.7"/40cm Parabolic Hexadecagon Softbox
Mount TypeMini Bowens Mount
CompatibilityK&F CONCEPT PL-60B, NANLITE Forza 60 II/60B II/60C/60CR/150/150B, FS-60B, FC 60B/120B
Open Size (Diameter x Depth)Ø 40 x 28 cm (15.7 x 11.0 in)
Storage Size (LxWxH)36 x 14 x 14 cm (14.2 x 5.5 x 5.5 in)
Product Weight380 ± 5g (0.83 ± 0.01 lb)
Softbox FabricOuter nylon + Inner high reflective coating
Support Rod MaterialAluminum alloy
Diffusion MaterialPolyester
Chuck MaterialHigh temperature resistant PVC
Diagram showing the materials used for the softbox: outer nylon, inner reflective coating, aluminum alloy support rods, polyester diffuser, and high-temperature resistant PVC chuck.
Figure 9: Premium materials used in the softbox construction.

8. User Tips

  • This softbox is particularly well-suited for small lights due to its compact size and lightweight design.
  • The durable materials ensure longevity, making it a reliable choice for frequent use.
  • Always double-check compatibility with your specific light model, especially regarding the mini Bowens mount, to ensure a perfect fit.

9. Warranty and Support

For any questions, suggestions, or support regarding your K&F CONCEPT softbox, please contact us directly at service@kfconcept.com. Please provide your product model and any relevant details to assist us in providing the best possible support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.