1. Introduction
The ANDELI CUT-55Y is a versatile and high-performance plasma cutting machine designed for efficient metal cutting and MMA welding. Featuring a built-in air pump, it eliminates the need for an external air compressor for basic operations, offering convenience and portability. This inverter plasma cutter supports both High-Frequency (HF) and Non-High-Frequency (Non-HF) cutting modes, allowing for precise cuts on various metal types and thicknesses. The intuitive LED screen display provides clear visibility and adjustable functions, making it user-friendly for both beginners and experienced operators. This manual provides essential information for the safe and effective use of your CUT-55Y machine.

2. Safety Information
Operating plasma cutting and welding equipment can be dangerous if proper safety precautions are not followed. Always prioritize your safety and the safety of those around you.
- Eye and Face Protection: Always wear a welding helmet with appropriate shade lenses to protect your eyes and face from intense light, sparks, and UV/IR radiation.
- Body Protection: Wear flame-resistant clothing, heavy-duty gloves, and safety shoes to protect against sparks, heat, and electrical shock.
- Ventilation: Ensure adequate ventilation in the work area to remove fumes and gases produced during cutting and welding. If working in confined spaces, use a respirator.
- Fire Hazards: Keep flammable materials away from the work area. Have a fire extinguisher readily available. Sparks and hot metal can travel a significant distance.
- Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Never touch live electrical parts. Disconnect power before performing any maintenance or changing accessories.
- Compressed Air Safety: Although the machine has a built-in air pump, if using an external air compressor, ensure hoses are in good condition and connections are secure.
- Work Area: Keep the work area clean and free of clutter. Ensure stable footing.
- Children and Bystanders: Keep children and unauthorized personnel away from the work area.
3. Package Contents
Upon unpacking your ANDELI CUT-55Y, please verify that all the following items are included:
- ANDELI CUT-55Y Plasma Cutting Machine
- FPT-40 Plasma Cutting Torch (4M cable)
- MMA Holder (for stick welding)
- Ground Clamp
- Consumables: Nozzles (multiple pieces), Electrodes (multiple pieces)

4. Specifications
The following table details the technical specifications for the ANDELI CUT-55Y Plasma Cutting Machine:
| Parameter | Model | CUT Function | MMA Function |
|---|---|---|---|
| Input Voltage (V) | AC220±15% | ||
| Rated Input Capacity (KVA) | CUT-55Y | 7.0 | 6.4 |
| Rate Input Current (A) | 32 | 29 | |
| No-load Voltage (V) | 310 | 68 | |
| Current Range (A) | 20-40 | 30-140 | |
| Rate Output Voltage (V) | 88/96 | 21.2/25.6 | |
| Duty Cycle (40°C, 10min) | 35% 40A, 60% 30A, 100% 23A | 25% 140A, 60% 90A, 100% 70A | |
| Efficiency (%) | 79 | 80 | |
| Power Factor | 0.76 | 0.7 | |
| Insulation Class | H | ||
| Protection Class | IP21S | ||
| Machine Dimensions (mm) | 484 x 177 x 292 | ||
| Weight (kg) | 13.5KG ± 0.2KG | ||

5. Setup
Before operating the machine, ensure it is placed on a stable, level surface in a well-ventilated area.
5.1 Power Connection
- Connect the machine to a 220V AC power supply. Ensure the power outlet is properly grounded and capable of handling the machine's rated input current.
5.2 Ground Clamp Connection
- Attach the ground clamp securely to the workpiece or a clean, bare metal part of the work table. A good ground connection is crucial for safe and effective operation.
5.3 Torch Connection
The CUT-55Y supports both HF (High-Frequency) and Non-HF (Low-Frequency) cutting torches. Ensure you connect the correct torch for your desired operation.
- HF Torch Connection: Connect the HF torch cable to the designated HF port on the machine's front panel.
- Non-HF Torch Connection: Connect the Non-HF torch cable to the designated Non-HF port on the machine's front panel.
Note: The machine will automatically switch to the interface corresponding to the connected cutting torch. Always ensure the machine is switched off before connecting or disconnecting torches.

5.4 Air Supply
The CUT-55Y features a built-in air pump, making it ready to use without an external air compressor for most applications.
- For standard cutting operations, no external air connection is required.
- For cutting thicker materials or if higher air pressure is desired, an external air compressor can be connected to the machine's external air inlet.


6. Operating Instructions
Familiarize yourself with the control panel before beginning operations.
6.1 Control Panel Overview
The LED large screen display makes functions visible and adjustable. The thickness of the cutting board is visible and adjustable, simplifying operation for all users.

- GAS Select Button: Toggles between Internal Gas, External Gas, and VRD (Voltage Reduction Device) in MMA mode.
- Select Button: Used to choose between Grid, 2T (Two-Touch), and 4T (Four-Touch) modes in CUT operation.
- GAS Time Select Button: Adjusts Pre-flow time (1-10 seconds) and Post-flow time (5-15 seconds) in CUT mode.
- Gas Check Button: Activates a gas flow check.
- Function Selection Button: Selects between HF CUT, LF CUT (Non-HF CUT), and MMA (Manual Metal Arc) welding modes.
- MMA Mode Function Button: In MMA mode, this button allows adjustment of HOT START (0-10%), ARC FORCE (0-10%), and ARC time.
- Knob Gear: This rotary knob is used to adjust various parameters depending on the selected mode, including Gas time, Cutting Current, HOT START Current, and ARC FORCE Current.
6.2 Plasma Cutting Operation
- Power On: Turn on the main power switch.
- Select Cutting Mode: Use the Function Selection Button (5) to choose between HF CUT or LF CUT (Non-HF CUT) based on your torch and material.
- Adjust Current: Use the Knob Gear (7) to set the desired cutting current (20-40A). The display will show the current and estimated cutting thickness.
- Set Gas Times (Optional): If needed, use the GAS Time Select Button (3) to adjust pre-flow and post-flow gas times.
- Perform Gas Check: Press the Gas Check Button (4) to ensure proper gas flow.
- Position Torch: Hold the torch perpendicular to the workpiece. For HF start, the arc initiates upon trigger pull. For Non-HF (pilot arc) start, the torch may need to be slightly off the workpiece to initiate the pilot arc before touching the material.
- Begin Cutting: Press the torch trigger to start the arc and begin cutting. Maintain a steady travel speed for a clean cut.
Cutting Thickness Capabilities:
- HF Cutter: Maximum cutting thickness 12mm (0.47 inches).
- Non-HF Cutter: Maximum cutting thickness 25mm (0.98 inches).

Suitable Materials:
The CUT-55Y is suitable for cutting a wide range of materials, including:
- Iron
- Stainless steel
- Aluminium
- Copper

6.3 MMA Welding Operation
- Connect MMA Holder: Connect the MMA holder to the appropriate terminal on the machine.
- Select MMA Mode: Use the Function Selection Button (5) to select MMA mode.
- Adjust Current: Use the Knob Gear (7) to set the desired welding current (30-140A).
- Adjust MMA Functions (Optional): Use the MMA Mode Function Button (6) to fine-tune HOT START and ARC FORCE settings as needed for your electrode and material.
- Begin Welding: Strike the electrode against the workpiece to initiate the arc and begin welding.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your CUT-55Y machine.
- Nozzle and Electrode Inspection: Regularly inspect the plasma torch nozzle and electrode for wear. The machine features a unique arc feedback technology that intelligently detects nozzle wear and prompts replacement when flashing. Replace worn consumables promptly to maintain cut quality and prevent damage to the torch.

- General Cleaning: Keep the machine clean and free of dust and metal particles. Use compressed air to blow out internal components periodically, ensuring the machine is unplugged first.
- Air Filter: Check and clean the air filter for the built-in air pump regularly to ensure proper airflow and prevent overheating.
- Cable and Hose Inspection: Inspect all cables, hoses, and connections for damage before each use. Replace any damaged components immediately.
8. Troubleshooting
This section provides solutions to common issues you might encounter.
- No Power: Check the power cord connection, main power switch, and circuit breaker. Ensure the input voltage is within the specified range (AC220V±15%).
- No Arc:
- Ensure the ground clamp is securely attached to the workpiece and has good electrical contact.
- Check torch consumables (nozzle, electrode) for wear and replace if necessary.
- Verify the air pressure is sufficient (if using external air, check compressor).
- Ensure the correct cutting mode (HF/LF) is selected for the connected torch.
- Poor Cut Quality / Inconsistent Arc:
- Check for worn or damaged torch consumables.
- Adjust cutting current and travel speed.
- Ensure proper standoff distance between the torch and workpiece.
- Verify adequate air pressure and flow.
- Overheating: The machine has a duty cycle. If it overheats, it will typically shut down temporarily. Allow it to cool down. Ensure proper ventilation and that cooling vents are not obstructed.
- Error Codes: If an error code appears on the LED display, refer to the specific error code section in the full manual (if available) or contact customer support.
9. User Tips
- Practice on Scrap Material: Before working on important projects, practice cutting and welding on scrap pieces to get a feel for the machine's settings and your technique.
- Optimize Settings: Experiment with different current settings, travel speeds, and standoff distances to achieve the best cut quality for various materials and thicknesses.
- Keep Consumables Handy: Always have spare nozzles and electrodes on hand, as they are wear items and need frequent replacement for optimal performance.
- Cleanliness is Key: A clean work area and clean machine components contribute significantly to safety and performance.
10. Warranty and Support
The ANDELI CUT-55Y Plasma Cutting Machine comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or inquiries about replacement parts, please contact your authorized ANDELI dealer or the seller directly. Provide your product model number (CUT-55Y) and a detailed description of the issue to facilitate faster service.