DEKO DKGT2001BL-S2

Contents

DEKOPRO 2-in-1 Cordless Brushcutter/Edger

Model: DKGT2001BL-S2

User Instruction Manual

1. Introduction

Thank you for choosing the DEKOPRO 2-in-1 Cordless Brushcutter/Edger. This versatile tool is designed for efficient lawn and garden maintenance, allowing you to easily switch between trimming and edging tasks. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

DEKOPRO 2-in-1 Cordless Brushcutter/Edger with accessories
Figure 1: DEKOPRO 2-in-1 Cordless Brushcutter/Edger and included accessories.

2. General Safety Information

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.

  • Wear appropriate personal protective equipment (PPE) such as safety glasses, long pants, and sturdy footwear.
  • Keep children and bystanders away from the operating area.
  • Do not operate the tool in wet conditions or rain.
  • Ensure the battery is fully charged before use.
  • Always remove the battery before making adjustments, changing accessories, or storing the tool.
  • Use only DEKOPRO approved batteries and chargers.
  • Do not force the tool; let it work at its intended speed.
  • Inspect the cutting line and guard before each use for damage.
Safety lock mechanism on the DEKOPRO brushcutter handle
Figure 2: Safety Lock - Press Step 1 (lock-off button) then Step 2 (trigger switch) to prevent accidental start.

3. Package Contents

Carefully unpack all items and ensure you have received the following:

  • DEKOPRO 2-in-1 Cordless Brushcutter/Edger Unit
  • 2 x 20V 2.0Ah Long-Life Batteries
  • Battery Charger
  • Auxiliary Handle
  • Spacer Guard
  • Protection Cover
  • Spool (pre-installed or separate)
  • Additional Spools (quantity may vary)
  • Instruction Manual

If any items are missing or damaged, please contact customer support.

4. Parts Identification

Familiarize yourself with the components of your brushcutter/edger:

Diagram of DEKOPRO brushcutter with labeled parts
Figure 3: Key Components
  1. Lock-off Button
  2. Trigger Switch
  3. Auxiliary Handle
  4. Handle Adjusting Knob
  5. Lock Sleeve
  6. Trimming/Edging Switch Button
  7. Edge Guide Wheel
  8. Head Adjusting Knob
  9. Spacer Guard
  10. Protection Cover
  11. Spool

5. Assembly and Setup

5.1. Attaching the Protection Cover

Align the protection cover with the mounting points on the trimmer head and secure it firmly. Ensure it clicks into place or is fastened with provided screws.

5.2. Installing the Auxiliary Handle

Slide the auxiliary handle onto the shaft. Adjust its position for comfortable operation and tighten the Handle Adjusting Knob to secure it.

5.3. Adjusting the Shaft Length

The tool features an adjustable shaft for user comfort and reach. Loosen the Lock Sleeve, extend or retract the shaft to the desired length (between 38 and 51 inches), and then tighten the Lock Sleeve securely.

Adjustable length feature of the brushcutter, showing 51 inch and 38 inch positions
Figure 4: Adjustable Length for user comfort (38 to 51 inches).

5.4. Charging and Installing Batteries

Your brushcutter comes with two 20V 2.0Ah batteries. Fully charge both batteries before first use. The charger can fully charge a battery in approximately 1 hour.

  • Connect the charger to a power outlet.
  • Insert the battery into the charger. The indicator light will show charging status.
  • Once fully charged, remove the battery from the charger.
  • To install, slide the charged battery into the battery slot on the tool until it clicks into place.
  • To remove, press the battery release button and slide the battery out.
Image showing two 20V 2.0Ah batteries with charging indicators
Figure 5: Long Runtime Batteries (2x 2.0Ah) and Fast Charging.

6. Operating Instructions

6.1. Starting and Stopping the Tool

To start the tool, first press the Lock-off Button, then squeeze the Trigger Switch. To stop, release the Trigger Switch.

6.2. Switching Between Trimming and Edging Modes

The DEKOPRO tool can be easily converted from a brushcutter (trimmer) to an edger:

  • **For Trimming:** Ensure the head is in the horizontal position.
  • **For Edging:** Press the Trimming/Edging Switch Button and rotate the head 90 degrees to the vertical position. The Edge Guide Wheel will assist in maintaining a consistent cutting depth along edges.
Image showing the brushcutter in both edging and trimming modes
Figure 6: Edging and Trimming Modes.

6.3. Adjusting the Cutting Head Angle

The cutting head can be adjusted to three different angles (60° adjustable) to reach difficult areas or for specific cutting needs. Use the Head Adjusting Knob to change the angle.

Three positions for the adjustable cutting head
Figure 7: Adjustable Cutting Head Positions (Position 1, 2, 3).

6.4. Automatic Line Feed

The tool features an automatic line feed system. The cutting line will automatically extend as needed during operation, ensuring continuous cutting without manual intervention.

Close-up of the automatic line feed mechanism
Figure 8: Automatic Line Feed for uninterrupted operation.

6.5. Using the Spacer Guard

The 12-inch spacer guard helps protect plants, landscape features, and lawn ornaments from accidental cutting. Position it appropriately when working near delicate areas.

Brushcutter in use with the 12-inch spacer guard protecting plants
Figure 9: 12-inch Spacer Guard in action.

6.6. Usage Scenarios

This tool is suitable for various outdoor environments, including:

  • Yards
  • Parks
  • Outdoor areas
  • Grasslands
Collage of images showing the brushcutter being used in a yard, park, outdoor area, and grassland
Figure 10: Versatile Usage Scenarios.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool.

  • **Cleaning:** After each use, remove the battery and clean the tool with a damp cloth. Remove any grass clippings or debris from the cutting head and ventilation slots.
  • **Line Replacement:** When the cutting line runs out, replace the spool with a new one. Refer to the diagram for proper installation.
  • **Storage:** Store the tool in a dry, secure place, out of reach of children. Ensure the battery is removed before storage.
  • **Battery Care:** Store batteries in a cool, dry place. Do not store fully discharged batteries for extended periods.
Video 1: Product demonstration including line replacement and usage.

8. Troubleshooting

Problem Possible Cause Solution
Tool does not start Battery not charged or improperly installed; Safety lock not engaged; Trigger switch faulty. Ensure battery is charged and correctly inserted. Press the lock-off button before squeezing the trigger. If problem persists, contact support.
Cutting line does not extend Spool empty; Line tangled; Debris in head. Replace spool. Remove battery and clear any debris from the cutting head.
Reduced cutting performance Dull or short cutting line; Low battery charge; Overgrown weeds. Replace cutting line. Recharge battery. Work in smaller passes for very thick vegetation.
Excessive vibration Damaged cutting head or spool; Loose components. Inspect cutting head and spool for damage and replace if necessary. Check all fasteners for tightness.

9. Specifications

Feature Detail
Brand DEKO
Model Number DKGT2001BL-S2
Power Source Battery (Electricity)
Battery Voltage 20V
Battery Capacity 2.0Ah (x2 included)
Charging Time Approx. 1 hour per battery
Motor Type Brushless
Motor Speed 10000 rpm
Cutting Diameter 12 inches (30 cm)
Adjustable Head Angle 60° (3 positions)
Adjustable Length 38 - 51 inches
Weight (Tool only) Less than 4.5 lbs
Package Dimensions (L x W x H) 106 cm x 18 cm x 13 cm
Package Weight 3.32 kg

10. User Tips

  • **Battery Management:** With two batteries included, consider rotating them to ensure continuous work for larger areas. Always have one charging while using the other.
  • **Clear Parts Identification:** If you are unsure about any part, refer to the 'Parts Identification' section and its diagram for clarity, especially for components like the edge guide wheel or spacer guard.

11. Warranty and Support

DEKOPRO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official DEKO website. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.