Salange projector stand

Contents

Salange Universal Projector Stand Instruction Manual

Model: Projector Stand

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Salange Universal Projector Stand. This versatile stand is designed for use with various mini projectors, including models like XGIMI, DLP Mini Beamers, HY300, HY320, YG300, and other LED projectors, offering flexible mounting options for home theaters, conference rooms, AV rooms, and media centers.

Salange Projector Stand with various compatible mini projectors and mounting hardware

Figure 1: Salange Projector Stand compatible with various mini projectors and showing included mounting hardware.

2. Package Contents

Please verify that all items are present in your package:

  • 1x Projector Stand (main unit)
  • Mounting Screws
  • Wall Anchors

Note: The projector itself is not included in the package.

3. Specifications

Feature Detail
Color Black
Material Aluminum alloy + Plastic
Maximum Weight Capacity 2 kg
Screw Interface Universal 1/4 inch (6mm) thread
Adjustable Angles Full 360° rotation, 90° tilt
Available Heights (approx.) 20-40cm, 30-60cm, 40-80cm (depending on model variant)
Base Diameter (approx.) 8.5 cm (3.4 inches)
Dimensions of the projector stand showing 17.5cm height and 8.5cm base diameter, with 360 degree rotation and 90 degree tilt capabilities.

Figure 2: Stand dimensions and adjustable angles.

Three different height variants of the projector stand: 20-40cm, 30-60cm, and 40-80cm.

Figure 3: Available height options for the projector stand.

4. Setup and Installation

The Salange Projector Stand offers multiple installation options: ceiling mount, wall mount, or as a desktop stand.

4.1. Choosing a Mounting Location

Select a sturdy surface (ceiling, wall, or flat desktop) that can safely support the weight of the stand and your projector. Ensure the location provides optimal projection distance and angle.

4.2. Mounting as a Ceiling or Wall Bracket

  1. Mark Drill Holes: Position the base of the stand against the desired ceiling or wall location. Use a pencil to mark the positions for the mounting screws.
  2. Drill Holes: Using an appropriate drill bit for your wall/ceiling material, drill pilot holes at the marked locations.
  3. Insert Wall Anchors: If mounting into drywall or similar material, insert the provided wall anchors into the drilled holes.
  4. Secure the Base: Align the stand's base with the drilled holes and secure it firmly using the provided mounting screws.
  5. Attach Projector: Screw your projector onto the 1/4 inch (6mm) threaded bolt at the top of the stand. Ensure it is securely fastened.
Diagram showing side mounting (wall), top mounting (ceiling), and vertical mounting (table stand) options for the projector stand.

Figure 4: Various mounting options for the projector stand.

Close-up of a projector mounted to the stand, highlighting the 6mm (1/4 inch) thread connection.

Figure 5: Projector attachment point with 1/4 inch (6mm) thread.

Close-up of the universal 1/4 inch screw interface, showing compatibility with different screw sizes (Ø3.9/5.9/6.35mm).

Figure 6: Universal 1/4 inch screw interface for projector attachment.

4.3. Using as a Desktop Stand

For desktop use, simply place the stand on a flat, stable surface. Ensure the base is fully seated and the stand is upright before attaching your projector.

5. Operating Instructions

5.1. Attaching Your Projector

The stand features a universal 1/4 inch (6mm) screw interface, compatible with most projectors. Carefully align the projector's mounting hole with the stand's screw and rotate the projector clockwise until it is firmly attached. Do not overtighten.

5.2. Adjusting Angles

The stand allows for full 360° rotation and 90° tilt. Loosen the adjustment knob on the ball head joint, position your projector to the desired angle, and then tighten the knob firmly to secure it in place.

Video 1: Demonstration of attaching a projector and adjusting the stand's angle.

5.3. Adjusting Height (for adjustable models)

For models with adjustable height, loosen the locking mechanism on the main pole, extend or retract the pole to the desired height, and then securely tighten the locking mechanism. Ensure the stand is stable after adjustment.

6. Maintenance

  • Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
  • Inspection: Periodically check all screws and connections to ensure they are tight and secure, especially after moving or adjusting the stand.
  • Weight Limit: Do not exceed the maximum weight capacity of 2 kg to prevent damage to the stand or your projector.

7. Troubleshooting

7.1. Projector feels unstable

  • Ensure the projector is screwed tightly onto the 1/4 inch thread.
  • Verify that the angle adjustment knob on the ball head is fully tightened.
  • If using as a desktop stand, ensure it is on a flat, stable surface.
  • Check that the total weight of the projector does not exceed 2 kg.

7.2. Stand is wobbly after installation

  • For ceiling or wall mounts, ensure all mounting screws and wall anchors are securely fastened into a solid surface.
  • If your model has adjustable height, ensure the locking mechanism on the pole is fully engaged.

8. User Tips

  • When selecting a stand, consider the height variants (20-40cm, 30-60cm, 40-80cm) to best suit your projection needs.
  • The universal 1/4 inch screw is standard for many cameras and projectors, making this stand highly versatile.
  • Always double-check the stability of the stand and projector after any adjustments to ensure a secure setup.

9. Frequently Asked Questions (FAQ)

Q: What is the maximum height of the stand?
A: The stand is available in several height variants: 20-40cm, 30-60cm, and 40-80cm. Please refer to the specific model purchased for its maximum extension.

10. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2023 Salange. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.