ANDELI MCT-520DPL PRO

Contents

ANDELI MCT-520DPL PRO 5-in-1 Multifunctional Welding Machine

Model: MCT-520DPL PRO

Brand: ANDELI

1. Introduction

The ANDELI MCT-520DPL PRO is a versatile 5-in-1 welding machine designed for a wide range of welding and cutting applications. This multiprocess welder supports Aluminum MIG, CUT, MIG (CO2/MIX/FLUX), TIG (HF), COLD, PULSE, and MMA processes, making it suitable for various materials including stainless steel, carbon steel, and aluminum alloys. Its intelligent design and comprehensive features provide flexibility and precision for both professional and hobbyist use.

2. Safety Information

Always prioritize safety when operating welding and cutting equipment. Failure to follow safety guidelines can result in serious injury or death.

  • Eye and Face Protection: Always wear a welding helmet with appropriate shade lenses to protect against arc flash and sparks.
  • Body Protection: Wear flame-resistant clothing, heavy-duty gloves, and safety shoes. Avoid synthetic materials.
  • Ventilation: Ensure adequate ventilation to remove welding fumes and gases from the work area. Use local exhaust ventilation or respirators if necessary.
  • Electrical Safety: Ensure the machine is properly grounded. Never operate the welder in wet conditions. Inspect cables and connections for damage before each use.
  • Fire Prevention: Keep a fire extinguisher nearby. Remove all flammable materials from the welding area. Be aware of hot metal and sparks.
  • Gas Cylinders: Secure gas cylinders to prevent tipping. Handle gas cylinders with care and ensure proper connections.
  • Work Area: Keep the work area clean and free of clutter. Ensure good lighting.

3. Package Contents

Verify that all items listed below are included in your package:

  • MCT-520DPL Pro Welding Machine (with US plug)
  • Ground Clamp
  • Aluminum Welding Torch (3M) x 1
  • MIG Torch x 1
  • CUT Torch PT-31 x 1
  • TIG Torch WP-9F x 1
  • Gas Pipe (3M)
  • Air Pressure Regulator
  • Hose Clamp x 2
  • Tungsten Electrode x 10
  • Tip x 10
  • Electrode x 10
Image showing the ANDELI MCT-520DPL PRO welding machine and its included accessories such as torches, ground clamp, gas pipe, and consumables.
Figure 3.1: Included Accessories and Machine Dimensions

4. Product Overview and Features

The ANDELI MCT-520DPL PRO is an intelligent 5-in-1 welder offering multiple functions for diverse welding needs.

Image showing the ANDELI MCT-520DPL PRO welder with a list of its 5-in-1 functions: CUT, MIG, COLD/CLEAN, PULSE, TIG, MMA.
Figure 4.1: Intelligent 5-in-1 Welder Functions

4.1 Control Panel

The front panel provides digital displays for voltage, amperage, frequency, and other parameters, along with buttons for function selection and an adjustment knob for fine-tuning settings.

Front view of the ANDELI MCT-520DPL PRO welding machine, highlighting the control panel and front connections.
Figure 4.2: Front View of the Welding Machine
Detailed diagram of the ANDELI MCT-520DPL PRO control panel, showing digital displays, function buttons for MIG, CUT, TIG, Cold, Clean, MMA, and adjustment knob for current, pulse, frequency, and post-flow.
Figure 4.3: Control Panel Diagram

The control panel features:

  • Digital Intelligent Display: Shows welding parameters (V, A, %, Hz).
  • Function Selection: Buttons for MIG (2T/4T), CUT, TIG, Cold/Clean, MMA, and Pulse.
  • Parameter Adjustment: A central knob to adjust current, pulse width, base frequency, crater, and post-flow.
  • Storage: Ability to store welding parameters for quick recall.
Diagram illustrating the main components of the control panel: 1. Screen (Digital intelligent display), 2. Storage (Store welding parameters), 3. Function (MIG, CUT, TIG, Cold/Clean, MMA), 4. Parameter (Capable for adjustment when welding).
Figure 4.4: Control Panel Overview

5. Setup

Before operating the welding machine, ensure proper setup for safe and effective use.

  1. Power Connection: Connect the machine to a 230V power supply. Ensure the power outlet is properly rated and grounded.
  2. Ground Clamp Connection: Attach the ground clamp securely to the workpiece or welding table. Ensure good electrical contact.
  3. Torch Connection: Connect the appropriate torch (MIG, TIG, or CUT) to the corresponding port on the front panel. Ensure all connections are tight.
  4. Gas Connection (for MIG, TIG, COLD):
    • Connect the gas pipe to the machine's gas inlet and to your gas cylinder regulator.
    • For MIG welding, use CO2, MIX gas, or Flux-cored wire (no gas needed).
    • For TIG and COLD welding, use pure argon gas.
    • Adjust the gas flow rate according to your welding process and material.
  5. MIG Wire Spool Installation:
    • Open the side panel of the machine.
    • Place the 1kg or 5kg welding wire spool onto the spindle.
    • Feed the wire through the drive rollers and into the MIG torch liner.
    • Close the side panel.
    Image showing the internal compartment of the ANDELI MCT-520DPL PRO with a MIG wire spool installed, and examples of MIG welds.
    Figure 5.1: MIG Wire Spool Installation
Video 5.1: Demonstration of the welding machine's power connection and initial operation.

6. Operating Instructions

This section details the operation of each welding and cutting mode.

6.1 General Panel Operation

  • Power On: Turn on the main power switch located on the rear of the machine.
  • Select Function: Press the corresponding button on the control panel (MIG, CUT, TIG, Cold, MMA) to select your desired welding/cutting mode.
  • Adjust Parameters: Use the central adjustment knob and associated buttons to set parameters like current, voltage, pulse frequency, etc., as displayed on the digital screen.
  • Store Settings: The machine allows for storing frequently used settings. Refer to the control panel diagram (Figure 4.3) for specific storage indicators.

6.2 MIG Welding (Aluminum MIG, CO2, MIX, Flux)

  • Modes: Select between 2T (two-stroke) and 4T (four-stroke) trigger modes.
  • Gas Types: Use CO2, MIX gas, or Flux-cored wire (which does not require external shielding gas).
  • Settings: Utilize synthetic settings (0.6/0.8/0.9/1.0 for wire diameter) or manual settings for precise control.
  • Recommended Thickness: Suitable for materials from 0.8mm to 10mm.
  • Aluminum MIG: This machine is specifically upgraded for aluminum MIG welding.

6.3 CUT Function

  • Recommended Thickness: Up to 10mm.
  • Ultimate Thickness: Capable of cutting up to 12mm.
  • Ensure proper air pressure and consumables for plasma cutting.
Image detailing the CUT function, showing recommended and ultimate cutting thicknesses, and examples of rapid perforation on 1mm galvanized sheet, high-speed cutting on 6mm carbon steel plate, and normal cutting on 10mm carbon steel plate.
Figure 6.1: CUT Function Capabilities and Examples

6.4 MMA Welding (Stick Welding)

  • Features: Easy Arc Starting and Non-stick Electrode for smoother operation.
  • Lasting Welding: Supports welding rods up to 4.0mm in diameter.
  • Adjust 'Hot Start' and 'Force' parameters for optimal arc characteristics.
Image illustrating MMA welding, showing the machine's MMA mode selection and examples of welds on 3.2 Carbon Steel, 3.2 Stainless Steel, and 4.0 Carbon Steel.
Figure 6.2: MMA Welding Features and Examples

6.5 TIG Welding (HF)

  • Recommended Thickness: Suitable for materials from 0.8mm to 8.0mm.
  • Pulse Function: Use the pulse feature for enhanced control over heat input and bead appearance.
  • Requires pure argon gas for shielding.
Image showing TIG welding details, including recommended thickness, a diagram of the pulse function settings (Current, Pulse Width, Base, Frequency, Crater, Post Flow), and an example of a TIG weld on 3mm Stainless Steel.
Figure 6.3: TIG Welding with Pulse Function

6.6 COLD Welding

  • Process: Follow a three-step welding process for optimal results.
  • Pulse Function: Utilizes a pulse function for precise control.
  • Recommended Thickness: Ideal for thin materials from 0.4mm to 3.0mm.
  • Gas Requirement: Requires pure argon gas.
  • This mode is designed for welding thin stainless steel, thin steel, and carbon steel with minimal deformation and discoloration.
Image explaining COLD welding, showing the machine in Cold mode, and illustrating the difference between spot welding (Interval = 0) and pulse welding (Interval > 0) with weld examples.
Figure 6.4: COLD Welding and Pulse Function

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the exterior of the machine with a dry cloth. Ensure ventilation openings are free from dust and debris.
  • Connections: Regularly check all electrical and gas connections for tightness and signs of wear or damage. Replace damaged cables immediately.
  • Cooling System: The machine uses a FAN & AIR cooling system. Ensure adequate airflow around the machine and keep the fan vents clear.
  • Consumables: Inspect and replace worn-out consumables (nozzles, tips, electrodes, tungsten) as needed for each welding process.
  • Wire Feeder (MIG): Clean the wire feeder mechanism and check the drive rollers for wear. Ensure the wire liner is free of kinks or blockages.

8. Troubleshooting

This section addresses common issues you might encounter and their potential solutions.

ProblemPossible CauseSolution
Machine does not power onNo power supply; Faulty power cable; Internal fuse blownCheck power plug and outlet; Inspect power cable for damage; Contact support if fuse is suspected.
Poor weld quality (e.g., porosity, weak penetration)Incorrect settings (current, voltage, wire speed); Insufficient gas flow; Contaminated workpiece; Incorrect consumablesAdjust parameters according to material and thickness; Check gas cylinder and flow rate; Clean workpiece thoroughly; Use correct wire/electrode/gas.
Arc instability or difficulty starting arcPoor ground connection; Incorrect electrode/tungsten preparation; Low current settingEnsure solid ground connection; Sharpen tungsten or replace electrode; Increase current.
Overheating indicator activeExceeding duty cycle; Blocked ventilation; High ambient temperatureAllow machine to cool down; Clear all ventilation openings; Operate in a cooler environment.
MIG wire feeding issuesIncorrect drive roller tension; Kinked or dirty liner; Wrong size drive rollers; BirdnestingAdjust drive roller tension; Clean or replace liner; Ensure correct drive rollers for wire size; Clear any tangled wire.

9. Specifications

Technical specifications for the ANDELI MCT-520DPL PRO welding machine.

FeatureSpecification (MCT-520DPL)
ModelMCT-520DPL
FunctionsMIG, CUT, MMA, TIG (C.C. TIG/Pulse TIG), Cold
Power Supply Voltage230V ± 10%
Frequency50 / 60 Hz
Power Factor0.70 - 0.76
Efficiency80 - 85%
Rated Input Power (KW)MIG: ~8.2, CUT: ~8.5, MMA: ~6.2, TIG: ~6.2
Effective Input Current (A)MIG: 20, CUT: 20, MMA: 27, TIG: 27, Cold: 14
Welding Current Range (A)MIG: 50-200, MMA: 10-200, TIG: 10-200, Clean: 1-40
No-Load Voltage (V)MIG: 64, CUT: 268, MMA: 64, TIG: 64, Cold: 64
Welding ThicknessMIG: 0.6/0.8/0.9/1.0, MMA: 2.5/3.2/4.0, TIG: 0.8-8, Cold: 0.4-3
Cutting ThicknessCUT: 6-10mm
Protection ClassIP21S
Insulation ClassH
CoolingFAN & AIR
Dimension (mm)489 × 210 × 327
Net Weight (KG)~16KG
Table showing detailed parameters for MCT-520DPL and MCT-520DPC models, including power supply, frequency, efficiency, rated input power, welding current range, no-load voltage, welding thickness, cutting thickness, protection class, insulation class, cooling, dimensions, and net weight.
Figure 9.1: Detailed Parameter Table for MCT-520DPL

10. User Tips

  • For COLD welding, always use pure argon gas to achieve the best aesthetic results and prevent discoloration.
  • When switching between welding processes, double-check that you have the correct torch, gas, and consumables installed and that the machine settings are appropriate for the selected mode.
  • Practice on scrap material before working on your final project to fine-tune your settings and technique.

11. Warranty and Support

The ANDELI MCT-520DPL PRO comes with a two-year warranty from the date of purchase. ANDELI also provides free lifetime technical support for this welding machine.

If you encounter any problems during setup or operation, or require technical assistance, please contact the seller or ANDELI customer service for guidance. They offer free guidance and support for product-related issues.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.