NEEWER QPRO-N

Contents

NEEWER QPRO-N TTL Wireless Flash Trigger

Instruction Manual

1. Introduction

The NEEWER QPRO-N TTL Wireless Flash Trigger is a versatile and professional device designed to provide seamless wireless control over your NEEWER Q system flashes and other compatible lighting equipment. This trigger supports a wide array of functions including TTL autoflash, high-speed sync, multi-flash, manual flash, and more, ensuring precise lighting control for your photography needs. Its user-friendly interface and robust compatibility make it an essential tool for photographers.

NEEWER QPRO-N TTL Wireless Flash Trigger mounted on a Nikon camera

The NEEWER QPRO-N TTL Wireless Flash Trigger.

2. Safety Information

  • Do not expose the device to water or high humidity.
  • Avoid dropping or subjecting the device to strong impacts.
  • Keep out of reach of children.
  • Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
  • Use only specified AA batteries.

3. Package Contents

Please check the package to ensure all items are present:

  • 1 x Upgraded QPRO-N Wireless Flash Trigger

Note: 2 x AA batteries are required for operation and are not included in the package.

4. Product Overview

The QPRO-N features a user-friendly interface with a large LCD screen and intuitive physical buttons for easy operation.

Detailed diagram of the QPRO-N trigger with labeled buttons and ports

QPRO-N Wireless Flash Trigger with labeled controls.

  • Group buttons (A-E): Press to select, double press to expand.
  • Back button: Returns to the previous screen.
  • Dial: Turn clockwise for + (increase value), counter-clockwise for - (decrease value).
  • RST button: Reset function.
  • MODE button: Short press to switch mode, long press for 3 seconds to lock.
  • MENU button: Short press to access the menu.
  • Test button: Triggers a test flash.
  • USB Type C firmware upgrade port: For updating device firmware.
  • 2.5mm sync jack: For connecting to non-Q system flashes or for wireless shutter control.
  • Autofocus assist beam: Provides illumination for focusing in low light.
  • Autofocus assist beam switch: Turns the autofocus assist beam on/off.
  • Hot shoe quick lock: For quick and secure mounting to the camera.
  • Power switch: Turns the device on/off.

5. Setup

5.1 Battery Installation

  1. Locate the battery compartment on the QPRO-N trigger.
  2. Open the compartment and insert two AA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment securely.

5.2 Mounting on Camera

The QPRO-N features a quick install hot shoe design for easy attachment to your camera.

  1. Slide the QPRO-N's hot shoe onto your camera's hot shoe.
  2. Push the quick lock lever to secure the trigger in place.
Quick Install Hot Shoe Lock Design and compatible Nikon cameras

Quick Install Hot Shoe Lock Design for secure mounting.

5.3 Powering On/Off

Use the power switch located on the side of the trigger to turn the device on or off.

6. Operating Instructions

6.1 Wireless Q System Integration

The QPRO-N is designed to wirelessly trigger NEEWER Q system flashes such as Q4, Q3, Z1-N, Z760-N, NW420-N, NW655-N, S101-300W/400W PRO.

Diagram showing the NEEWER QPRO-N trigger controlling various NEEWER Q system flashes and studio lights

The QPRO-N integrates with the NEEWER Wireless Q System.

6.2 Connecting to Non-Q System Flashes

To control other flashes without a built-in Q system, you will need a NEEWER QR receiver and a 2.5mm sync cord (both sold separately).

Four scenarios of wireless and one-touch triggering, including on-camera, sync cable, and remote shutter

Wireless and one-touch triggering options.

6.3 Group, Channel, and Wireless ID Settings

The QPRO-N supports 5 groups (A, B, C, D, E), 32 channels, and 01-99 wireless IDs. To ensure stable and interference-free communication, set the transmitter and all receiver flashes to the same channel and wireless ID.

Diagram illustrating group and synchronous flash control with 5 groups, 32 channels, and 99 wireless IDs

Group and synchronous flash control setup.

6.4 Professional Flash Modes

The QPRO-N fully supports various flashing options for both master and slave flashes:

  • TTL Autoflash (i-TTL): Automatic flash exposure.
  • 1/8000s High-Speed Sync (HSS): Allows for faster shutter speeds to freeze motion or use wider apertures in bright conditions.
  • Multi-flash (Stroboscopic Flash): Fires a series of rapid flashes.
  • Manual Flash: Manually set flash power output.
  • Flash Exposure Compensation (FEC): Adjust flash output for desired exposure.
  • Magnification Function: Zoom in on group settings for detailed view.
  • Group Modeling Lamp Control: Control modeling lamps on connected flashes.
  • Group Zooming: Adjust the zoom value of the flash head through the transmitter.
  • Single-Point Triggering: For fast continuous shooting (disable single contact mode 'SHOOT' for TTL and HSS).
  • Front and Rear Curtain Synchronization: Control when the flash fires relative to the shutter curtains.
Icons representing professional flash modes: High Speed Sync, TTL/M/Multi flash mode, 9 custom functions, exposure compensation, zoom, and front/rear curtain synchronization

Professional flash modes supported by QPRO-N.

6.5 Screen Magnifier Function

The LCD screen displays up to five flash groups (A-E) simultaneously. To view detailed settings for a single group, double-press the corresponding group button. This will switch the display to a magnified view of that specific group's settings.

User-friendly interface with magnification and memory functions shown on the QPRO-N screen

User-friendly interface with magnification function.

6.6 Memory Function

The QPRO-N automatically saves any changes to settings after 2 seconds. These settings are automatically restored when the device is powered on again.

7. Maintenance

  • Clean the device regularly with a soft, dry cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Store the device in a dry, dust-free environment when not in use.
  • Remove batteries if the device will not be used for an extended period.

8. Troubleshooting

8.1 Compatibility Issues

If you experience compatibility issues with your Nikon camera or flashes, please check for available firmware upgrades. Firmware updates can often resolve such problems. The QPRO-N is compatible with the following Nikon cameras:

  • D4, D5, D6, D60, D70S, D90, D100, D200, D300, D610, D700, D750, D780, D800, D810, D850
  • D3100, D3200, D3300, D3400, D3500, D5000, D5100, D5200, D5300
  • D7100, D7500
  • Z9, Zfc, Z50, Z5, Z6, Z7, Z6II, Z7II

Note: The QPRO-N is NOT compatible with Nikon D810. For newer camera models like the Z2, please check the NEEWER official website for the latest firmware updates and compatibility information.

8.2 No Flash Triggering

  • Ensure the QPRO-N is securely mounted on the camera's hot shoe.
  • Check that the power switch is ON and batteries are correctly inserted and charged.
  • Verify that the flash trigger and receiver flashes are set to the same channel and wireless ID.
  • Confirm that the flash mode (TTL, Manual) is appropriate for your setup.
  • If using single-point triggering, ensure 'SHOOT' mode is enabled via C.Fn MENU.

8.3 Interference

If you experience signal interference, try changing the channel and wireless ID settings on both the QPRO-N and your receiver flashes to a less congested combination.

9. Specifications

FeatureDetail
ModelQPRO-N
Wireless System2.4GHz frequency
Modulation ModeMSK
Channels32
Wireless ID01-99
GroupsA, B, C, D, E (5 groups)
TTL Autoflashi-TTL
Power Supply2 x AA batteries (Not included)
Manual/Stroboscopic FlashYes
High Speed/Second Curtain SyncYes
Exposure Compensation/LockYes
Focus AssistYes
Modeling Lamp ControlControlled by the Trigger
BuzzerControlled by the Trigger
Wireless ShutterWith the 2.5mm sync jack
Zoom SettingsAdjusted through the transmitter
Firmware UpdateVia the USB Type C port
Memory FunctionAutomatically saves settings after 2 seconds, restored on power-on
Display ScreenFSTN dot matrix screen

10. User Tips

  • Check Compatibility: Always verify your camera model against the official compatibility list. For newer Nikon Z-series cameras not explicitly listed (e.g., Z2), check the NEEWER website for the latest firmware updates.
  • Firmware Updates: If you encounter any issues, especially with newer camera models, check the NEEWER website for firmware updates. Updating the firmware can often resolve compatibility problems.
  • Battery Life: Keep spare AA batteries handy, especially during long shoots, as they are not included.
  • Build Quality: Users have noted the plastic feels soft to the touch, which can be a preference.
  • Packaging: While the product itself is generally well-regarded, some users have reported minor packaging damage upon arrival. The product inside is typically unaffected.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official NEEWER website or contact your retailer. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual is available for download from the seller's website: NEEWER QPRO-N User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.