Introduction
Thank you for choosing the MTX Audio MTX-490DSP Detachable 1 Din Bluetooth Stereo. This manual provides detailed instructions for the installation, operation, and maintenance of your new car audio system. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your listening experience.
Product Overview
The MTX-490DSP is a versatile 1-DIN car stereo designed for enhanced audio performance and connectivity. Key features include a detachable front panel for security, Bluetooth for wireless audio streaming and hands-free calls, USB and auxiliary inputs, a 25-band equalizer with Time Corrector DSP, and RGB lighting.
Front View

Rear View

Side Views


Setup and Installation
Professional installation is highly recommended for this product. Incorrect wiring can cause damage to the unit or your vehicle's electrical system.
Installation Guidelines
- Ensure the vehicle's battery is disconnected before starting installation.
- This unit is a 1-DIN size. Verify compatibility with your vehicle's dashboard opening.
- Use the provided mounting hardware to secure the unit firmly in the dashboard.
Wiring Connections
Refer to the wiring diagram provided with your unit for specific connections. General connections include:
- Power Connector: Connect the main power harness to the vehicle's power supply (constant 12V, accessory 12V, and ground).
- Speaker Outputs: Connect your vehicle's speakers to the corresponding speaker wires from the unit's harness.
- RCA Outputs: The unit features six 3.5 Volts RCA outputs (Front Left, Front Right, Subwoofer) for connecting external amplifiers and subwoofers.
- Antenna Input: Connect your vehicle's radio antenna to the ANT input on the rear of the unit.
- Auxiliary Input: If applicable, connect external audio sources via the auxiliary input.
- USB Port: For connecting USB storage devices.
Detachable Front Panel
The front panel is detachable for security. To remove, press the release button (if present) and carefully pull the panel away from the main unit. To reattach, align the panel with the main unit and push until it clicks into place.
Operating Instructions
Basic Controls
- Power/Volume Knob: Press to turn the unit ON/OFF. Rotate to adjust volume.
- SRC (Source) Button: Press to cycle through available audio sources (FM, AM, Bluetooth, USB, AUX).
- BND (Band) Button: In radio mode, press to switch between radio bands (FM1, FM2, FM3, AM1, AM2).
- Play/Pause/Skip Buttons: Control media playback for USB and Bluetooth sources.
Bluetooth Operation
- Pairing: Select Bluetooth as the source. On your mobile device, search for available Bluetooth devices and select 'MTX-490DSP'. Enter '0000' if a PIN is required.
- Music Streaming: Once paired, you can stream audio from your device to the stereo. Use the stereo's controls or your device to manage playback.
- Hands-Free Calls: When a call comes in, the stereo will display the caller ID. Press the answer button on the stereo to accept the call.
USB and Auxiliary Input
- USB: Insert a USB storage device into the USB port. The unit will automatically switch to USB mode and begin playing compatible audio files.
- AUX: Connect an external audio player to the auxiliary input using a 3.5mm audio cable. Select AUX as the source.
FM Radio
- Tuning: Use the seek buttons to automatically search for radio stations.
- Preset Stations: The unit supports 30 preset radio stations. To save a station, tune to the desired frequency, then press and hold a preset button (1-6) until you hear a beep.
Audio Settings (DSP)
The MTX-490DSP features advanced audio processing:
- 25-Band Equalizer: Access the equalizer settings through the menu to fine-tune the audio frequency response to your preference.
- Time Corrector DSP: Adjust the time alignment for each speaker to ensure optimal sound staging and imaging.
- Crossover (HP/LP): Configure high-pass (HP) and low-pass (LP) filters for your speakers and subwoofer to optimize frequency distribution.
Display and Lighting
The unit features a high-quality LCD display and customizable RGB night lighting. Adjust the color and brightness settings through the menu to match your vehicle's interior or personal preference.
Voice Command
The MTX-490DSP is compatible with Siri for voice commands. When connected via Bluetooth to a compatible iOS device, you can activate Siri through the stereo to make calls, send messages, or control music hands-free.
Maintenance
Cleaning the Unit
- Use a soft, dry cloth to wipe the front panel and display.
- For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner.
- Do not use harsh chemicals, solvents, or abrasive cleaners, as they can damage the finish or display.
General Care
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Ensure proper ventilation around the unit to prevent overheating.
- When removing the detachable front panel, handle it carefully to avoid scratches or damage to the connectors.
Troubleshooting
If you encounter issues with your MTX-490DSP, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect wiring; Blown fuse; Vehicle battery low | Check all power connections; Replace fuse (located on the rear of the unit); Check vehicle battery. |
| No sound | Volume too low; Mute activated; Incorrect source selected; Speaker wiring issue | Increase volume; Deactivate mute; Select correct audio source; Check speaker connections. |
| Bluetooth not connecting | Device not in pairing mode; Stereo not in Bluetooth mode; Interference | Ensure both devices are in pairing mode; Select Bluetooth source on stereo; Move closer to the unit; Restart both devices. |
| USB device not recognized | Incompatible file format; USB device not formatted correctly; Damaged USB device | Ensure files are compatible (e.g., MP3); Format USB to FAT32; Try a different USB device. |
| Radio reception poor | Antenna not connected; Weak signal; Interference | Check antenna connection; Try tuning to a stronger station; Move away from sources of interference. |
If the problem persists after trying these solutions, please contact customer support or a qualified technician.
Specifications
| Feature | Specification |
|---|---|
| Brand | MTX Audio |
| Model Name | MTX-490DSP |
| Install Size | 1 Din |
| Item Weight | 0.75 kg |
| Maximum Output Power | 60 Watts x 4 |
| Equalizer | 25 bands |
| Time Corrector DSP | Yes |
| RCA Output | 3.5 Volts (Front, Rear, Subwoofer) |
| Connectivity | Bluetooth, USB, Auxiliary Input |
| Voice Command | Siri compatible |
| Display | LCD |
| Night Lighting | RGB |
| OSD Language | Spanish (may be configurable) |
| Color | Black |
| Origin | Mainland China |
Warranty and Support
Warranty Information
Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided at the time of purchase or contact your retailer.
Return & Refund Policy
This product is subject to the seller's Return & Refund policy. For details on eligibility, procedures, and timelines for returns or refunds, please consult the policy provided by your point of purchase or the AliExpress platform's terms of service.
Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact the seller or the MTX Audio customer support channels available in your region. Ensure you have your product model number (MTX-490DSP) and purchase details ready when contacting support.