Introduction
This manual provides essential information for the safe and effective operation of your HOSHI SJRC XR-1 Remote Controller with Screen. Please read this manual thoroughly before use and retain it for future reference. The XR-1 Remote Controller is designed for use with SJRC F22 S2 PRO+, F22 S3 PRO, F11S 4K PRO+, and F22 S2+ drone models.
Safety Information
- Always operate the remote controller in a safe environment, away from obstacles and other electronic devices that may cause interference.
- Ensure the remote controller is fully charged before each use to prevent loss of control during flight.
- Keep the remote controller dry and clean. Avoid exposure to extreme temperatures or direct sunlight.
- Do not attempt to disassemble or modify the remote controller, as this may void the warranty and cause damage.
- Adhere to all local regulations and laws regarding drone operation and remote control usage.
Package Contents
The package typically includes:
- HOSHI SJRC XR-1 Remote Controller with Screen
- USB-C Charging Cable
- Carrying Case (may vary by package)
Product Overview: Part Names and Functions
Familiarize yourself with the various parts of your XR-1 Remote Controller:
- Throttle Stick: Controls the drone's altitude and yaw.
- Status LED: Indicates connection status. Solid Red for disconnecting the aircraft, Solid Green for connecting the aircraft.
- Battery Level LED: Shows battery status. Blinking means battery is discharging, Flickering means battery is under charging, Flashing at the last grid means battery is in low power.
- Direction Stick: Controls the drone's forward, backward, left, and right movement.
- Speed Switch: Click once to cycle between Cine, Normal, and Sport flight modes. Press and hold for 3 seconds to activate Cruising Control.
- Power Button: Shortly press to check battery level. Press and hold for 3 seconds to switch the controller on or off.
- Return to Home (RTH) / Altitude Mode Button: Short press for GPS Return to Home (RTH). Press and hold for 3 seconds to enter altitude mode.
- Touchscreen: 5.5-inch high-definition display for drone telemetry, camera view, and settings.
- Microphone: For audio input.
- Speaker: For audio output (less than 85dB).
- USB-C Charging Port: For charging the remote controller.
- Micro SD Card Slot: Supports external expansion up to 256GB (UHS-1 Speed Grade 3 or above recommended).
- Zoom Control: Adjusts the camera's zoom level.
- Camera Control Dial: Adjusts the angle of the camera up and down.
- Shooting Button: Captures photos.
- Recording Button: Starts and stops video recording.
- Control Sticks Storage Slot: For storing the control sticks when not in use.
- Customizable C1 Button: Assignable function button.
- Customizable C2 Button: Assignable function button.
- Fan: Internal cooling fan.
Specifications
| Feature | Detail |
|---|---|
| Operating Frequency | 5.15-5.25GHz; 5.725-5.825 GHz |
| Max Control Distance | Up to 6KM (dependent on outdoor environment without interference) |
| Wi-Fi Frequencies | 2412-2472MHz (802.11b/g/n/ax, power<20dB) |
| Bluetooth Frequencies | 2402-2480MHz (Power<10dB) |
| GNSS | GPS+BDS |
| Weight | 425g / 14.99oz |
| Battery | Built-in 7.4V 2500mAh Li-polymer battery; 18.5Wh |
| Operating Time | Approximately 4 hours |
| Charging Time | Approximately 2.5 hours (depending on charging power) |
| Charging Type | USB-C charging cable |
| Operating Temperature | 0°C to 40°C (32° to 104° F) |
| Storage Space | Supports external expansion of UHS-1 Speed Grade 3 or above spec microSD cards, max 256GB |
| Material | Plastic |
| Color | Grey |
| Screen Dimension | 5.5 inch |
| Compatible Drones | F22 S2 PRO+ / F22 S3 PRO / F11S 4K PRO+ / F22 S2+ / F22S |
Setup
1. Initial Charging
Before first use, fully charge the remote controller using the provided USB-C charging cable. Connect the cable to the USB-C Charging Port (11) on the controller and a suitable USB power source. The Battery Level LEDs (3) will flicker during charging and stop when fully charged. Charging typically takes about 2.5 hours.
2. Powering On/Off
To power on the remote controller, short press the Power Button (6) to check the battery level, then press and hold it for 3 seconds. To power off, repeat the same procedure.
3. Drone Pairing
The XR-1 Remote Controller features automatic frequency pairing upon power-on, simplifying the connection process with compatible SJRC drones. Ensure your drone is powered on and ready for connection. The Status LED (2) will turn solid green once connected to the aircraft.
4. Micro SD Card Installation (Optional)
If you wish to store flight data or media directly on the controller, insert a compatible microSD card (UHS-1 Speed Grade 3 or above, up to 256GB) into the Micro SD Card Slot (12).
Operating Instructions
1. Basic Flight Controls
- Throttle Stick (1): Push up to increase altitude, pull down to decrease. Move left/right to control yaw (rotation).
- Direction Stick (4): Push up for forward flight, pull down for backward flight. Move left/right for sideways flight.
2. Flight Modes and Special Functions
- Speed Switch (5): Click once to toggle between Cine (cinematic), Normal, and Sport flight modes. Each mode offers different responsiveness and speed.
- Cruising Control (5): Press and hold the Speed Switch for 3 seconds to activate cruising control, maintaining a steady flight path.
- GPS Return to Home (RTH) (7): Short press this button to initiate the drone's automatic return to its recorded home point.
- Altitude Mode (7): Press and hold the RTH button for 3 seconds to enter altitude mode, which maintains a stable altitude without GPS positioning.
3. Camera Control
- Camera Control Dial (14): Use this dial to adjust the vertical angle (tilt) of the drone's camera.
- Shooting Button (15): Press to take a single photo.
- Recording Button (16): Press once to start video recording, press again to stop.
- Zoom Control (13): Use this control to adjust the camera's zoom level.
4. Customizable Buttons
The XR-1 Remote Controller features Customizable C1 Button (18) and Customizable C2 Button (19). These buttons can be assigned specific functions through the controller's settings menu to suit your flight preferences.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote controller's surface and screen. Avoid using harsh chemicals or abrasive materials.
- Battery Care: For optimal battery life, avoid fully discharging the Li-polymer battery frequently. If storing for extended periods, charge the battery to approximately 50-60%.
- Storage: Store the remote controller in a cool, dry place, away from direct sunlight and extreme temperatures (0°C to 40°C). Use the provided carrying case for protection during transport.
- Software Updates: Periodically check the manufacturer's website or drone app for any available firmware updates for the remote controller to ensure optimal performance and compatibility.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote controller does not power on. | Low battery. | Charge the remote controller using the USB-C cable. |
| Status LED is Solid Red. | Aircraft is disconnected. | Ensure the drone is powered on and within range. Re-pair if necessary. |
| Battery Level LED is flashing at the last grid. | Low battery power. | Recharge the remote controller immediately. |
| Difficulty connecting to drone. | Interference, drone not powered on, or out of range. | Move to an area with less interference, ensure drone is on, and bring it closer to the controller. |
| Screen is unresponsive or frozen. | Temporary software glitch. | Power off the controller and restart it. If the issue persists, contact support. |
User Tips
- Compatibility: This remote controller is compatible with SJRC F22 S2 PRO+, F22 S3 PRO, F11S 4K PRO+, F22 S2+, and F22S drone models.
- Customization: Take advantage of the customizable C1 and C2 buttons to set up functions that best suit your flying style for quick access during flight.
- Ease of Use: The 5.5-inch high-definition screen and automatic frequency pairing are designed to simplify your drone operation, eliminating the need for a separate mobile phone connection and cumbersome setup.
- Range Awareness: While the maximum control distance is up to 6KM, always be mindful of your surroundings and maintain visual line of sight with your drone, especially in areas with potential signal interference.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your HOSHI SJRC XR-1 Remote Controller, please contact the seller directly using the information below:
- Email: 3307634062@qq.com
- WhatsApp: +86 19374154701
- Telephone: +86 16670371310
- WeChat: +86 16670371310
Please provide your product model and purchase details when contacting support to ensure efficient service.
