JINGSHA X58 LGA 1366M

Contents

JINGSHA X58 LGA 1366 CPU Motherboard

Model: X58 LGA 1366M

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA X58 LGA 1366 CPU Motherboard. Please read this manual thoroughly before attempting any installation or configuration to ensure proper functionality and to prevent damage to your components.

Product Overview Video

Video Description: A general overview of the JINGSHA X58 LGA 1366 CPU Motherboard, highlighting its key features and design.

2. Features

  • CPU Socket: LGA 1366, supporting Intel XEON Processors.
  • Memory: DDR3, with support for REG ECC memory up to 32GB.
  • USB: USB2.0 ports for peripheral connectivity.
  • Chipset: X58 series chipset.
  • Graphics Support: Compatible with AMD RX Series graphics cards.

3. Package Contents

Please check the contents of your package. If any items are missing or damaged, contact your vendor immediately.

  • JINGSHA X58 LGA 1366 CPU Motherboard
  • I/O Shield
  • SATA Cables (quantity may vary)
  • User Manual (this document)
  • Driver CD/USB (optional, drivers may also be available online)

4. Setup and Installation

4.1. Motherboard Layout

JINGSHA X58 Motherboard Component Layout

Image Description: Detailed layout of the JINGSHA X58 motherboard, showing the placement of the CPU socket, RAM slots, PCIe slots, and various connectors.

4.2. Physical Installation

  1. Prepare the Case: Install the I/O shield into the rear opening of your computer case.
  2. Install the CPU:
    LGA 1366 CPU Socket and RAM Slots

    Image Description: Close-up view of the LGA 1366 CPU socket and adjacent DDR3 RAM slots on the JINGSHA X58 motherboard.

    • Open the CPU socket lever.
    • Carefully align the CPU (Intel XEON Processor) with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket.
    • Gently place the CPU into the socket. Do not force it.
    • Close the socket lever to secure the CPU.
    • Apply thermal paste and install the CPU cooler.
  3. Install RAM:
    • Open the clips on the DDR3 memory slots.
    • Align the memory module with the slot, ensuring the notch on the module matches the notch in the slot.
    • Press down firmly on both ends of the memory module until the clips snap into place.
  4. Mount the Motherboard: Carefully place the motherboard into the case, aligning the screw holes with the standoffs. Secure it with screws.
  5. Install Graphics Card (Optional): Insert your AMD RX Series or other compatible graphics card into the primary PCIe x16 slot and secure it.
  6. Install Storage Devices: Connect your SSDs/HDDs to the SATA ports on the motherboard.
  7. Connect Power Supply: Connect the 24-pin ATX power connector and the 8-pin (or 4-pin) CPU power connector from your power supply to the motherboard. Connect power to your graphics card if required.

4.3. Connecting Peripherals

JINGSHA X58 Rear I/O Ports

Image Description: Rear I/O panel of the JINGSHA X58 motherboard, showing USB2.0 ports, audio jacks, and other connectivity options.

Connect your keyboard, mouse, monitor, and other USB2.0 peripherals to the appropriate ports on the rear I/O panel.

5. Operating Instructions

5.1. First Boot and BIOS Setup

  1. Power on your system.
  2. Press the designated key (usually DEL or F2) repeatedly during startup to enter the BIOS/UEFI setup utility.
  3. In the BIOS, you can configure settings such as boot order, date/time, CPU settings, and memory timings. Save changes and exit.

5.2. Driver Installation

After installing your operating system, install the necessary drivers for your motherboard components (chipset, audio, LAN, etc.) and graphics card. These can typically be found on the manufacturer's website or on the provided driver CD/USB.

5.3. Operating System Installation

Follow the instructions provided by your operating system manufacturer to install your preferred OS (e.g., Windows, Linux) onto your storage device.

6. Maintenance

6.1. Cleaning

Regularly clean your computer's interior to prevent dust buildup, which can lead to overheating. Use compressed air to remove dust from fans, heatsinks, and motherboard components. Ensure the system is powered off and unplugged before cleaning.

6.2. BIOS Updates

Periodically check the JINGSHA support website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix bugs. Follow the update instructions carefully to avoid damaging your motherboard.

7. Troubleshooting

If you encounter issues, refer to the following common troubleshooting steps:

  • No Power: Check all power connections (24-pin ATX, 8-pin CPU, GPU power). Ensure the power supply is switched on.
  • No Display: Ensure the monitor is connected to the graphics card (not the motherboard's integrated graphics, if any). Reseat the graphics card and RAM modules.
  • System Instability/Crashes: Check CPU and GPU temperatures. Test RAM modules individually. Ensure all drivers are up to date.
  • POST Beep Codes: Listen for beep codes from the motherboard speaker. Consult the motherboard's documentation (or search online for X58 beep codes) to interpret these codes, which indicate specific hardware issues.
  • Peripheral Issues: Ensure USB devices are properly connected. Try different USB ports.

8. Specifications

FeatureSpecification
CPU SocketLGA 1366
Supported CPUsIntel XEON Processors
ChipsetIntel X58 Series
Memory TypeDDR3 (REG ECC Supported)
Max Memory CapacityUp to 32GB
USB PortsUSB2.0
Form FactorMicro-ATX (X58M)
OriginMainland China

9. User Tips

  • BIOS Battery: If you experience issues with BIOS settings not saving, consider replacing the CMOS battery (CR2032).
  • Memory Compatibility: While the board supports REG ECC DDR3, ensure your specific memory modules are compatible with the X58 chipset and your chosen XEON processor for optimal performance.
  • Power Supply: Use a reliable power supply unit (PSU) with sufficient wattage for all your components, especially if using a powerful graphics card and multiple storage drives.
  • Cable Management: Good cable management improves airflow and makes future maintenance easier.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official JINGSHA website. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.