Introduction
This manual provides instructions for the USB Programming Cable, designed to connect your walkie-talkie radio to a computer. This connection enables you to write program settings and frequencies to your two-way radio using compatible software. The cable features a universal 2-pin K-type interface for connecting to various walkie-talkie models and a standard USB-A connector for your computer.
Specifications
| Feature | Detail |
|---|---|
| Item Type | Programming Cable |
| Brand Name | Iradio |
| Adapted System | WinXP, Win7, Win8, Win10, Win11 |
| Connector B Type (To Connect PC or Mobile Phone) | USB |
| Connector A Type (To Connect Walkie Talkie) | 2-Pin K-Type Interface |
| Length/Effective Distance | Below 1.5m |
| Compatible with | BAJETON BJ-7800, Iradio UV-88, BinTolk BT-8000 BT-8200, Chierda TC318, BAOFENG BF-888S UV-5R UV-5RH UV-32 UV-21 PRO UV-5R Mini, Quansheng UV-K5 |
| Package Contents | 1 USB Programming Cable |
| Package Dimensions (L x W x H) | 16 cm x 14 cm x 2 cm |
| Package Weight | 0.045 kg |
Setup Instructions
Identify the Walkie-Talkie Interface:
Locate the 2-pin programming port on your walkie-talkie. This cable features a universal K-type interface with 2.5mm and 3.5mm pins, spaced 11mm apart.

Image: Detailed view of the 2-pin K-type connector with pin dimensions and spacing.
Connect the Cable to the Walkie-Talkie:
Carefully insert the 2-pin K-type connector of the programming cable into the corresponding port on your walkie-talkie.

Image: Close-up of the cable's 2-pin connector connected to a walkie-talkie.
Connect the Cable to the Computer:
Plug the USB-A end of the programming cable into an available USB port on your computer.

Image: The USB programming cable connecting a walkie-talkie to a laptop.
Driver Installation:
Your computer may automatically install the necessary drivers. If not, you might need to manually install them. Refer to your computer's Device Manager to check if the cable is recognized and to identify the assigned COM port.

Image: Highlights the ease of installation and use.
Operating Instructions
Once the cable is physically connected and drivers are installed, follow these steps to program your walkie-talkie:
Power On the Radio:
Ensure your walkie-talkie is powered on before proceeding.
Launch Programming Software:
Open the specific frequency writing or programming software for your walkie-talkie model on your computer. If you do not have the software, please contact the seller for assistance.
Select COM Port:
Within the programming software, navigate to the settings or communication port selection. Choose the correct COM port that was assigned to the USB programming cable by your computer (you can find this in Device Manager).
Read/Write Data:
Use the software's functions to read the current settings from your walkie-talkie or to write new frequency and program settings to it. Always follow the instructions provided by your specific radio's programming software.

Image: Overview of the USB programming cable and its compatibility with various walkie-talkie models.
Maintenance
- Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid sharp bends or kinks in the cable, as this can damage the internal wiring.
- Keep connectors clean and free from dust or debris. Use a soft, dry cloth to wipe them if necessary.
- Do not pull the cable by the wire; always grasp the connector when plugging or unplugging.
Troubleshooting
- Problem: Cable not recognized by the computer.
- Solution 1: Ensure the cable is securely plugged into both the walkie-talkie and the computer's USB port.
- Solution 2: Install the necessary drivers for the programming cable. Check your computer's Device Manager to see if the cable appears under "Ports (COM & LPT)" or "Universal Serial Bus controllers". If there's an exclamation mark, drivers may need to be updated or installed.
- Solution 3: Try a different USB port on your computer.
- Problem: Programming software cannot connect to the radio or read/write data.
- Solution 1: Verify that the walkie-talkie is powered on and fully connected to the programming cable.
- Solution 2: In the programming software, ensure you have selected the correct COM port that corresponds to the USB programming cable.
- Solution 3: Confirm you are using the correct programming software for your specific walkie-talkie model.
- Solution 4: Restart your computer and radio, then try again.
User Tips
- Always ensure your walkie-talkie is powered on before connecting the programming cable and attempting to read or write data.
- It is highly recommended to save a backup of your radio's current configuration before making any changes to its programming.
- Keep your walkie-talkie's programming software updated to ensure compatibility and access to the latest features.
Warranty and Support
For technical support, driver issues, or if you require the frequency writing software for your specific walkie-talkie model, please contact the seller or manufacturer directly. They can provide the most accurate and up-to-date resources for your product.