1. Introduction
Thank you for choosing the SHUJIE Intelligent Automatic Reptile Fogger. This system is designed to provide optimal humidification for your reptile terrarium or rainforest environment, ensuring a healthy habitat for your pets and plants. Featuring a touch screen control panel, timed misting, and adjustable nozzles, this device offers precise and reliable environmental control.
Image 1.1: The Intelligent Automatic Reptile Fogger in action, showing the control panel and misting nozzles.
2. Safety Information
Please read all safety instructions before operating the device to prevent injury or damage. Keep this manual for future reference.
- Ensure the power supply matches the device's requirements (DC5V2A).
- Do not immerse the main host unit in water.
- Keep the device out of reach of children and pets.
- Use only clean, filtered water to prevent nozzle clogging and ensure proper operation.
- Disconnect power before performing any maintenance or cleaning.
- The system includes a 5-minute forced shutdown function to reduce losses caused by erroneous operations.
3. Package Contents
Verify that all items listed below are included in your package:
Image 3.1: Visual representation of all components included in the package.
- Smart Host (Control Unit)
- Misting Nozzle (2 Pcs)
- Filter (1 Pc)
- Suckers (2 Pcs)
- Tube Clipper (1 Pc)
- Hook (1 Pc)
- Tube 5m
- Adhesive Backed Tube Clamp (4 Pcs)
- Cable Ties (6 Pcs)
- TYPE-C Cable
- US Plug (EU/UK Plug optional, depending on region)
- User Manual (This document)
4. Product Overview
The Intelligent Automatic Reptile Fogger is designed for ease of use and effective humidification. Key features include:
- Touch Screen Control: Intuitive interface for setting spray duration and interval.
- Automatic Timed Misting: Program watering duration from 10 seconds to 5 minutes, and interval time from 1 hour to 5 days.
- Dual Screen Display: Independent display of working hours and interval duration.
- Adjustable Nozzles: Two misting nozzles with 360° adjustable angles for flexible placement.
- Quick Plug Self-Locking Interface: Easy and secure tube connection.
- Low Noise Operation: Designed for quiet performance, operating at ≤ 50db (within 30cm range).
- Protection Mode: Features a 5-minute forced shutdown to prevent issues from incorrect operation.
Image 4.1: The control panel with touch buttons for manual/automatic spray, low noise operation, and countdown display.
Image 4.2: Misting nozzles with 360° adjustable angles.
5. Setup Instructions
Follow these steps to set up your reptile fogger system:
- Prepare Water Source: Place the filter end of the 5m tube into a clean water reservoir (e.g., a bucket or bottle). Ensure the filter is fully submerged.
- Connect Tubes to Host:
a. Identify the 'IN' and 'OUT' ports on the side of the Smart Host.
b. Insert the tube from the water reservoir into the 'IN' port. The quick plug self-locking interface will secure it automatically. To connect, simply insert the tube. To disconnect, press down on the gray ring and pull out the tube.
c. Connect the remaining tube length to the 'OUT' port. This tube will lead to the misting nozzles.
Image 5.1: Quick plug self-locking interface for tube connection.
- Install Misting Nozzles:
a. Cut the 'OUT' tube at desired points to insert the misting nozzles. Ensure cuts are clean and straight.
b. Insert the cut ends of the tube into the nozzle connectors. The nozzles are 360° adjustable, allowing you to direct the mist as needed.
c. Use the adhesive-backed tube clamps and cable ties to secure the tubing and nozzles within the terrarium. - Mount the Host Unit:
a. The host unit can be fixed using either the provided suckers or the hook.
b. For suction cup fixation: Attach the two suckers to the back of the host unit and press firmly onto a clean, smooth surface (e.g., terrarium glass).
c. For hook fixation: Attach the hook to the host unit and hang it from a suitable edge.
Image 5.2: Multiple fixing methods for the host unit.
- Connect Power: Connect the TYPE-C cable to the host unit and plug the US/EU/UK adapter into a power outlet.
Image 5.3: Connection diagram for the Smart Misting System.
6. Operating Instructions
The Smart Host features a touch screen for easy programming.
Image 6.1: Automatic timed misting display.
6.1. Setting Spray Duration
The 'Spray Duration' display shows how long the system will mist during each cycle.
- Tap the 'Spray Duration' area on the touch screen.
- Use the '+' and '-' buttons (or similar touch controls) to adjust the misting time. The duration can be set from 10 seconds to 5 minutes.
- Confirm your selection (usually by waiting a few seconds or tapping an 'OK' button if present).
6.2. Setting Stop Duration (Interval Time)
The 'Stop Duration' display shows the interval between misting cycles.
- Tap the 'Stop Duration' area on the touch screen.
- Use the '+' and '-' buttons (or similar touch controls) to adjust the interval time. The interval can be set from 1 hour to 5 days.
- Confirm your selection.
6.3. Manual Spray
To activate a manual spray cycle, locate the manual spray button (often represented by a misting icon) on the touch screen and tap it. The system will mist for the set 'Spray Duration'.
6.4. Power On/Off
The system typically powers on automatically when connected to power. To turn off or put into standby, refer to the power icon on the touch screen.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your fogger.
- Water Reservoir: Regularly check and refill the water reservoir. Ensure the water is clean and free of debris to prevent clogging.
- Filter Cleaning: Periodically remove and clean the water filter to maintain good water flow. Rinse under running water.
- Nozzle Cleaning: If misting performance decreases, the nozzles may be clogged. Disconnect power, remove the nozzles, and gently clean them with a small brush or by soaking in a descaling solution if mineral buildup is present.
- Tube Inspection: Check tubing for kinks, cracks, or leaks. Replace any damaged sections immediately.
- Host Unit: Wipe the host unit with a dry or slightly damp cloth. Do not use abrasive cleaners or immerse in water.
8. Troubleshooting
If you encounter issues with your fogger, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist/Weak mist |
|
|
| System not powering on |
|
|
| Water leakage |
|
|
| Inaccurate timing |
|
|
9. Specifications
Technical details for the Intelligent Automatic Reptile Fogger:
Image 9.1: Product dimensions and parameters.
| Feature | Detail |
|---|---|
| Product Name | Smart Spray System |
| Model Number | X593 |
| Host Weight | 180g |
| Interval Time | 1 hour to 5 days |
| Watering Time | 10 seconds to 5 minutes |
| Noise Range | ≤ 50db (within 30cm range) |
| Maximum Pressure | ≥ 30PSI (200KPA) |
| Input Power Supply | DC5V2A |
| Maximum Water Flow Rate | 600ml/min |
| Input Interface | TYPE-C |
| Host Size | 130 * 87 * 43mm |
| Battery Included | Yes |
| Voltage | 220-240V |
| Power (W) | 46W |
10. User Tips
- Water Quality: Always use distilled or reverse osmosis water to minimize mineral buildup in nozzles and tubing, which can lead to clogging.
- Nozzle Placement: Experiment with nozzle angles and positions to achieve even misting across the terrarium without directly soaking sensitive animals or electrical components.
- Monitoring: Regularly monitor the humidity levels in your terrarium with a hygrometer to fine-tune the spray duration and interval settings for your specific species' needs.
- Water Source Security: Ensure your water reservoir is stable and cannot be easily knocked over by pets or accidental bumps.
11. Warranty and Support
For any questions, technical assistance, or support regarding your SHUJIE Intelligent Automatic Reptile Fogger, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.